What is IDE (UDMA mode 4)?

IDE (UDMA mode 4), also known as Ultra DMA/66 (ATA-4), is a Parallel ATA transfer mode that moves blocks of data between a drive and host at about 66.7 MB/s using an 80-conductor IDE cable.

What does terabit/second (SI def.) mean?

A terabit per second (SI definition) represents a data transfer rate of 10^12 bits transmitted each second using the decimal 'tera' prefix standard.

Why convert IDE (UDMA mode 4) to terabit/second?

Converting these units helps compare legacy IDE interface speeds with modern high-speed data transmission rates for performance analysis and planning.

How to Convert from IDE (UDMA mode 4) to Terabit/second (SI def.)?

Learn how to convert data transfer rates from the legacy IDE (UDMA mode 4) standard to the modern terabit per second (SI definition) unit for meaningful comparisons and analysis.

IDE (UDMA mode 4)

Terabit/second (SI def.)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 4) to Terabit/second (SI def.) Conversion Table

IDE (UDMA mode 4)	Terabit/second (SI def.)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 4) to Terabit/second (SI def.) Conversion Table
IDE (UDMA mode 4)	Terabit/second (SI def.)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to translate data transfer speeds from IDE (UDMA mode 4), a legacy Parallel ATA standard, into terabit per second (SI def.), a modern unit measuring extremely high data transmission rates. It helps put older storage interface speeds into context with current networking and data transfer technologies.

How to Use This Tool?

Enter the data transfer speed value in IDE (UDMA mode 4) units.
Select IDE (UDMA mode 4) as the source unit and terabit/second (SI def.) as the target unit.
Initiate the conversion to see the equivalent data transfer rate in terabits per second.
Use the results to compare legacy IDE throughput with modern networking metrics.

Key Features

Converts IDE (UDMA mode 4) data transfer rates into terabit/second (SI definition).
Based on the official conversion factor linking legacy and modern data transfer units.
Helpful for benchmarking and comparing historical IDE device speeds to current high-speed standards.
Browser-based and easy to use without specialized software.
Supports practical IT maintenance, legacy system analysis, and scientific data transfer evaluation.

Examples

10 IDE (UDMA mode 4) equals 0.00528 terabits per second (SI def.).
50 IDE (UDMA mode 4) equals 0.0264 terabits per second (SI def.).

Common Use Cases

Connecting and configuring IDE hard drives or optical drives in older personal computers.
Benchmarking and troubleshooting legacy IDE interfaces in BIOS or firmware environments.
Comparing legacy IDE transfer speeds to modern terabit-scale data communication rates.
Evaluating performance differences in IT infrastructure upgrades.
Supporting large-scale scientific data transfers requiring knowledge of both legacy and modern units.

Tips & Best Practices

Always verify the source unit corresponds precisely to IDE (UDMA mode 4) specifications.
Use the converted values to understand relative performance, not exact practical throughput.
Consider real-world overheads that may reduce actual data rates below theoretical maximums.
Use this tool to aid in planning upgrades and maintaining legacy systems in IT environments.
Cross-check results when integrating legacy hardware with current high-speed networks.

Limitations

The conversion reflects only the theoretical maximum throughput of IDE (UDMA mode 4).
Does not account for real-world overheads or variations affecting actual transfer speeds.
Legacy IDE maximum speeds are significantly lower than terabit-scale rates, reducing direct interchangeability.
Not intended for precise performance benchmarking without additional context.

Frequently Asked Questions

What is IDE (UDMA mode 4)?: IDE (UDMA mode 4), also known as Ultra DMA/66 (ATA-4), is a Parallel ATA transfer mode that moves blocks of data between a drive and host at about 66.7 MB/s using an 80-conductor IDE cable.
What does terabit/second (SI def.) mean?: A terabit per second (SI definition) represents a data transfer rate of 10^12 bits transmitted each second using the decimal 'tera' prefix standard.
Why convert IDE (UDMA mode 4) to terabit/second?: Converting these units helps compare legacy IDE interface speeds with modern high-speed data transmission rates for performance analysis and planning.

Key Terminology

IDE (UDMA mode 4): A Parallel ATA data transfer mode delivering up to approximately 66.7 MB/s throughput using the Ultra DMA protocol and an 80-conductor cable.
Terabit/second (SI def.): A unit of data transfer rate equal to one trillion (10^12) bits transmitted per second, using the decimal prefix 'tera'.
Ultra DMA (UDMA): A data transfer protocol enhancing IDE drive performance by enabling faster block transfers between drive and host.

Quick Knowledge Check

What is the maximum theoretical throughput of IDE (UDMA mode 4)?

About 66.7 megabytes per second

1 terabit per second

100 megabits per second

What does the prefix 'tera' represent in terabit/second (SI def.)?

2 to the power of 40 bits

10 to the power of 12 bits

1,000 bits

What is a common use case for converting IDE (UDMA mode 4) to terabit/second?

Benchmarking legacy storage speed against modern networks

Configuring wireless internet routers

Measuring electricity usage

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter