What does IDE (UDMA mode 4) represent?

IDE (UDMA mode 4), also known as Ultra DMA/66 or ATA-4, is a data transfer mode used in older Parallel ATA storage interfaces with a theoretical maximum throughput of about 66.7 megabytes per second.

What is an ISDN (single channel)?

An ISDN (single channel) is one ISDN bearer channel with a fixed nominal data rate of 64 kilobits per second used in Integrated Services Digital Network systems for voice or data transmission.

Why convert IDE (UDMA mode 4) data rates to ISDN channels?

Converting IDE data rates to ISDN channels helps translate storage speed into equivalent telecommunication channel capacities for benchmarking, provisioning, or comparing legacy hardware performance.

How to Convert from IDE (UDMA mode 4) to ISDN (single channel)?

Convert data transfer rates from IDE (UDMA mode 4) to ISDN (single channel) with this easy-to-use online unit converter. Translate storage interface speeds into telecommunication channel capacities for legacy system benchmarking and network provisioning.

IDE (UDMA mode 4)

ISDN (single channel)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 4) to ISDN (single channel) Conversion Table

IDE (UDMA mode 4)	ISDN (single channel)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 4) to ISDN (single channel) Conversion Table
IDE (UDMA mode 4)	ISDN (single channel)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool converts data rates from IDE (UDMA mode 4), a Parallel ATA transfer mode for legacy storage devices, to ISDN (single channel), a telecommunication channel capacity unit used in Integrated Services Digital Network systems.

How to Use This Tool?

Enter the value in IDE (UDMA mode 4) units you want to convert.
Select IDE (UDMA mode 4) as the input unit and ISDN (single channel) as the output unit.
Click the convert button to see the equivalent number of ISDN channels.
Use the result to compare storage transfer rates with telecommunication channel capacities.

Key Features

Converts data transfer rates between IDE (UDMA mode 4) and ISDN (single channel).
Supports legacy hardware diagnostics and network provisioning needs.
Web-based and easy to use without complex configurations.
Includes predefined conversion ratio based on theoretical throughput values.

Examples

1 IDE (UDMA mode 4) equals 8250 ISDN (single channel).
0.5 IDE (UDMA mode 4) equals 4125 ISDN (single channel).

Common Use Cases

Connecting or benchmarking legacy PATA/IDE storage devices supporting ATA-66.
Provisioning ISDN lines and configuring telecommunication equipment with correct channel counts.
Translating high-speed storage interface data rates into telephony channel equivalents for network documentation.
Troubleshooting and maintaining data transfer speeds in older computer and telecom systems.

Tips & Best Practices

Verify the legacy hardware supports IDE (UDMA mode 4) for accurate conversions.
Use the conversion to assist in network planning involving mixed storage and telecommunication technologies.
Consider real-world conditions that may reduce IDE throughput below theoretical maximums.
Remember that ISDN channels have fixed nominal speeds and are not suitable for burst data rate representation.

Limitations

Actual IDE (UDMA mode 4) speeds may vary due to hardware quality and signal interference.
ISDN single channels operate at fixed nominal rates and do not capture variable transmission characteristics.
This conversion is intended for legacy systems; newer technologies use different standards and units.
The conversion formula reflects theoretical throughput and may not reflect practical data transfer rates.

Frequently Asked Questions

What does IDE (UDMA mode 4) represent?: IDE (UDMA mode 4), also known as Ultra DMA/66 or ATA-4, is a data transfer mode used in older Parallel ATA storage interfaces with a theoretical maximum throughput of about 66.7 megabytes per second.
What is an ISDN (single channel)?: An ISDN (single channel) is one ISDN bearer channel with a fixed nominal data rate of 64 kilobits per second used in Integrated Services Digital Network systems for voice or data transmission.
Why convert IDE (UDMA mode 4) data rates to ISDN channels?: Converting IDE data rates to ISDN channels helps translate storage speed into equivalent telecommunication channel capacities for benchmarking, provisioning, or comparing legacy hardware performance.

Key Terminology

IDE (UDMA mode 4): A Parallel ATA transfer mode in the IDE/ATA standard known as Ultra DMA/66 that offers a maximum theoretical data throughput of about 66.7 megabytes per second.
ISDN (single channel): One 64 kilobits per second ISDN bearer channel used in Integrated Services Digital Network systems to transmit voice or user data.
Conversion Rate: The fixed ratio used to convert IDE (UDMA mode 4) units into ISDN (single channel) units, specifically 1 IDE (UDMA mode 4) equals 8250 ISDN (single channel).

Quick Knowledge Check

What is the theoretical throughput of IDE (UDMA mode 4)?

100 megabytes per second

About 66.7 megabytes per second

64 kilobits per second

What is the nominal data rate of one ISDN (single channel)?

66.7 megabytes per second

64 kilobits per second

8250 kilobits per second

What is the conversion factor from IDE (UDMA mode 4) to ISDN (single channel)?

1 IDE equals 8250 ISDN channels

1 ISDN equals 66.7 IDE units

8250 IDE equals 1 ISDN channel

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter