What does IDE (UDMA mode 4) represent?

IDE (UDMA mode 4), also known as Ultra DMA/66, is a Parallel ATA transfer mode used in legacy IDE/ATA drives that supports data transfer rates up to about 66.7 megabytes per second.

What is STS3 (signal) used for?

STS3 (signal) is a SONET digital transmission signal with a line rate of 155.52 megabits per second, commonly used to transport multiple lower-rate channels in synchronous optical or electrical networks.

Why convert between IDE (UDMA mode 4) and STS3 (signal)?

Converting between these units aids in comparing legacy storage transfer rates with modern telecommunications infrastructure, useful for benchmarking, bandwidth planning, and network provisioning.

How to Convert from IDE (UDMA mode 4) to STS3 (signal)?

Convert data transfer rates from IDE (UDMA mode 4) to STS3 (signal) using this online unit converter. Understand the relationship between legacy PATA/IDE transfer modes and modern SONET transmission signals for bandwidth planning and network provisioning.

IDE (UDMA mode 4)

STS3 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 4) to STS3 (signal) Conversion Table

IDE (UDMA mode 4)	STS3 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 4) to STS3 (signal) Conversion Table
IDE (UDMA mode 4)	STS3 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool enables conversion between IDE (UDMA mode 4) and STS3 (signal) data transfer units. It helps translate data rates from older Parallel ATA drive standards to synchronous optical transmission signals used in telecommunications.

How to Use This Tool?

Enter the data transfer value in IDE (UDMA mode 4) units
Select IDE (UDMA mode 4) as the input unit and STS3 (signal) as the output unit
Click the convert button to see the equivalent STS3 (signal) value
Refer to examples for guidance on typical conversions

Key Features

Converts data transfer rates between legacy IDE/ATA and SONET standard units
Supports unit conversion based on established theoretical throughput and line rates
Browser-based and easy to use for quick and accurate calculations
Provides example conversions for quick reference

Examples

1 IDE (UDMA mode 4) equals approximately 3.395 STS3 (signal)
2 IDE (UDMA mode 4) equal approximately 6.790 STS3 (signal)

Common Use Cases

Connecting and assessing legacy PATA/IDE hard drives in older computer systems
Configuring or troubleshooting DMA modes in BIOS or firmware for embedded or desktop systems from the early 2000s
Benchmarking and maintaining older storage devices and recovering data from legacy IDE drives
Translating data rates for telecommunications backbone links using SONET infrastructure
Provisioning leased lines at 155.52 Mbps for enterprise or ISP interconnects

Tips & Best Practices

Ensure accurate input of IDE (UDMA mode 4) transfer values for reliable conversion output
Consider the theoretical nature of IDE throughput and account for possible hardware or cable quality effects
Use this converter as a planning and assessment tool rather than a precise measurement due to protocol overhead exclusions
Refer to use cases to understand the appropriate context for applying this conversion

Limitations

Conversion is based on theoretical maximum data rates, which can vary in actual hardware scenarios
STS3 rate represents a standard line rate and may not reflect solely usable payload bandwidth
Does not account for protocol or system overhead impacting real-world data throughput
Ideal conditions are assumed for conversions; real network or storage performance may differ

Frequently Asked Questions

What does IDE (UDMA mode 4) represent?: IDE (UDMA mode 4), also known as Ultra DMA/66, is a Parallel ATA transfer mode used in legacy IDE/ATA drives that supports data transfer rates up to about 66.7 megabytes per second.
What is STS3 (signal) used for?: STS3 (signal) is a SONET digital transmission signal with a line rate of 155.52 megabits per second, commonly used to transport multiple lower-rate channels in synchronous optical or electrical networks.
Why convert between IDE (UDMA mode 4) and STS3 (signal)?: Converting between these units aids in comparing legacy storage transfer rates with modern telecommunications infrastructure, useful for benchmarking, bandwidth planning, and network provisioning.

Key Terminology

IDE (UDMA mode 4): A Parallel ATA transfer mode using Ultra DMA protocol with maximum theoretical throughput of about 66.7 megabytes per second, typical in late 1990s to early 2000s IDE drives.
STS3 (signal): A SONET digital transmission signal with a line rate of 155.52 megabits per second used to multiplex and transport multiple channels over synchronous optical or electrical networks.
Conversion Rate: The factor used to translate one IDE (UDMA mode 4) unit into STS3 (signal) units, based on their theoretical data transfer rates.

Quick Knowledge Check

What is the approximate line rate of STS3 (signal)?

66.7 megabytes per second

155.52 megabits per second

51.84 megabits per second

IDE (UDMA mode 4) is also known as:

Ultra DMA/66 (ATA-4)

SONET OC-3

Synchronous Transport Signal level 3

Which is a common use case for converting IDE (UDMA mode 4) to STS3 (signal)?

Measuring cable quality

Benchmarking legacy storage against telecom links

Determining CPU speed

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter