What is IDE (UDMA mode 4)?

IDE (UDMA mode 4), also known as Ultra DMA/66 (ATA-4), is a Parallel ATA transfer mode that moves data between the drive and host with a theoretical maximum of about 66.7 MB/s, requiring an 80-conductor IDE cable.

How does IDE (PIO mode 1) differ from UDMA mode 4?

IDE (PIO mode 1) uses CPU-controlled data transfers with lower throughput and higher CPU overhead compared to UDMA mode 4, which uses direct memory access for faster transfer rates.

Why convert from UDMA mode 4 to PIO mode 1?

This conversion helps understand and manage data transfer modes needed for legacy device compatibility, troubleshooting, firmware development, or benchmarking on older systems.

How to Convert from IDE (UDMA mode 4) to IDE (PIO mode 1)?

Learn how to convert data transfer rates from IDE (UDMA mode 4) to IDE (PIO mode 1), including definitions, use cases, and practical examples for legacy PATA/IDE devices.

IDE (UDMA mode 4)

IDE (PIO mode 1)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 4) to IDE (PIO mode 1) Conversion Table

IDE (UDMA mode 4)	IDE (PIO mode 1)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 4) to IDE (PIO mode 1) Conversion Table
IDE (UDMA mode 4)	IDE (PIO mode 1)

Explore More Data Transfer Units Converter

What Is This Tool?

This unit converter helps you understand and convert data transfer rates between IDE (UDMA mode 4) and IDE (PIO mode 1), which are transfer modes used in legacy Parallel ATA storage devices.

How to Use This Tool?

Enter the value in IDE (UDMA mode 4) units you want to convert
Select IDE (PIO mode 1) as the target unit
Review the converted value indicating the equivalent transfer mode rate
Use this information for troubleshooting or analyzing legacy storage devices

Key Features

Converts between IDE (UDMA mode 4) and IDE (PIO mode 1) data transfer modes
Provides definitions and use cases for both transfer modes
Includes practical examples to illustrate conversions
Supports legacy system diagnostics and benchmarking
Browser-based and easy to use

Examples

1 IDE (UDMA mode 4) converts to approximately 12.69 IDE (PIO mode 1)
5 IDE (UDMA mode 4) converts to approximately 63.46 IDE (PIO mode 1)

Common Use Cases

Configuring and troubleshooting PATA/IDE hard drives in older PCs
Benchmarking vintage hardware performance with different transfer modes
Developing or debugging firmware and drivers requiring CPU-controlled data transfers
Data recovery and maintenance of legacy storage devices
Analyzing throughput and CPU overhead in embedded or industrial equipment

Tips & Best Practices

Verify device compatibility before changing transfer modes
Use proper IDE cables, especially 80-conductor cables for UDMA modes
Consider CPU overhead when working with PIO transfer modes
Apply conversions primarily for legacy systems and embedded environments
Utilize this tool to compare transfer performance during system diagnostics

Limitations

Conversion reflects relative transfer modes, not actual data size
Practical throughput depends on factors like CPU load and cable quality
PIO mode 1 has higher CPU usage and is slower compared to UDMA mode 4
Modern systems rarely support these modes, limiting relevance to legacy hardware
Performance characteristics are not guaranteed by this tool

Frequently Asked Questions

What is IDE (UDMA mode 4)?: IDE (UDMA mode 4), also known as Ultra DMA/66 (ATA-4), is a Parallel ATA transfer mode that moves data between the drive and host with a theoretical maximum of about 66.7 MB/s, requiring an 80-conductor IDE cable.
How does IDE (PIO mode 1) differ from UDMA mode 4?: IDE (PIO mode 1) uses CPU-controlled data transfers with lower throughput and higher CPU overhead compared to UDMA mode 4, which uses direct memory access for faster transfer rates.
Why convert from UDMA mode 4 to PIO mode 1?: This conversion helps understand and manage data transfer modes needed for legacy device compatibility, troubleshooting, firmware development, or benchmarking on older systems.

Key Terminology

IDE (UDMA mode 4): A Parallel ATA transfer mode using Ultra DMA protocol with about 66.7 megabytes per second throughput requiring an 80-conductor IDE cable.
IDE (PIO mode 1): An ATA/PATA transfer mode where the CPU manages each data transfer cycle resulting in lower throughput and higher CPU usage.
PATA: Parallel Advanced Technology Attachment, a standard interface for connecting storage devices like hard drives.

Quick Knowledge Check

Which transfer mode uses CPU cycles for each data transfer?

IDE (UDMA mode 4)

IDE (PIO mode 1)

Both modes equally

What type of cable is required for IDE (UDMA mode 4)?

40-conductor IDE cable

80-conductor IDE cable

SATA cable

In what kind of systems is converting between these transfer modes most relevant?

Modern gaming PCs

Legacy or embedded systems

Cloud data centers

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter