What does IDE (UDMA mode 4) represent?

IDE (UDMA mode 4) is a Parallel ATA transfer mode known as Ultra DMA/66, used for data transfer between drives and hosts at a maximum theoretical throughput of about 66.7 megabytes per second.

What is an STS12 (signal)?

STS-12 is a SONET transport signal with a synchronous line rate of 622.08 Mbit/s, used in high-speed fiber-optic networks for carrying multiplexed digital payloads.

Why convert between IDE (UDMA mode 4) and STS12 (signal)?

This conversion helps translate data transfer rates from legacy storage devices into modern synchronous transport network line rates, aiding compatibility assessment and network provisioning.

Is the conversion exact for real-world applications?

No, the conversion represents theoretical maximum rates and does not account for real-world overhead, hardware limitations, or signal conditions.

How to Convert from IDE (UDMA mode 4) to STS12 (signal)?

Convert data transfer measurements between IDE (UDMA mode 4) and STS12 (signal) units with this easy-to-use online converter tool.

IDE (UDMA mode 4)

STS12 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 4) to STS12 (signal) Conversion Table

IDE (UDMA mode 4)	STS12 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 4) to STS12 (signal) Conversion Table
IDE (UDMA mode 4)	STS12 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool allows you to convert data transfer rates from IDE (UDMA mode 4), a legacy Parallel ATA transfer mode, to STS12 (signal), a SONET synchronous transport signal, enabling comparison and interoperability between different technologies.

How to Use This Tool?

Enter the data transfer value using the IDE (UDMA mode 4) unit.
Select IDE (UDMA mode 4) as the source unit and STS12 (signal) as the target unit.
Click the convert button to see the equivalent STS12 (signal) value.
Use the examples provided for reference on input formatting and expected outputs.

Key Features

Converts data transfer rates between IDE (UDMA mode 4) and STS12 (signal).
Based on the maximum theoretical throughput values defined for each unit.
Supports translation between legacy storage throughput and modern synchronous optical network line rates.
Browser-based and user-friendly interface for quick conversions.
Provides example conversions to guide users.

Examples

Converting 1 IDE (UDMA mode 4) results in 0.8487654321 STS12 (signal).
Converting 5 IDE (UDMA mode 4) results in 4.2438271605 STS12 (signal).

Common Use Cases

Converting legacy IDE/ATA storage device throughput for network provisioning.
Translating data rates for benchmarking or maintenance of older hardware.
Assessing compatibility between Parallel ATA devices and SONET backbone networks.
Supporting telecommunications and network engineering tasks involving mixed legacy and modern systems.
Facilitating data recovery from IDE-based storage in contexts using SONET infrastructure.

Tips & Best Practices

Ensure values entered reflect the maximum or nominal throughput for accuracy in conversion context.
Verify the units being used to avoid confusion between megabytes per second and megabits per second.
Use conversions as a theoretical guide, not as an exact real-world performance measure.
Refer to example conversions to confirm correct input and interpretation of results.
Consider protocol overhead and signaling details when applying conversion results in practical scenarios.

Limitations

Conversion is based on theoretical maximum transfer rates and does not reflect actual device performance.
Differences in units (megabytes per second vs megabits per second) require careful consideration to avoid misinterpretation.
STS12 includes framing and overhead that do not correspond directly to raw data throughput from IDE devices.
Hardware overhead, signal quality, and protocol inefficiencies may cause real-world results to vary from converted values.

Frequently Asked Questions

What does IDE (UDMA mode 4) represent?: IDE (UDMA mode 4) is a Parallel ATA transfer mode known as Ultra DMA/66, used for data transfer between drives and hosts at a maximum theoretical throughput of about 66.7 megabytes per second.
What is an STS12 (signal)?: STS-12 is a SONET transport signal with a synchronous line rate of 622.08 Mbit/s, used in high-speed fiber-optic networks for carrying multiplexed digital payloads.
Why convert between IDE (UDMA mode 4) and STS12 (signal)?: This conversion helps translate data transfer rates from legacy storage devices into modern synchronous transport network line rates, aiding compatibility assessment and network provisioning.
Is the conversion exact for real-world applications?: No, the conversion represents theoretical maximum rates and does not account for real-world overhead, hardware limitations, or signal conditions.

Key Terminology

IDE (UDMA mode 4): A Parallel ATA transfer mode using Ultra DMA protocol to achieve up to about 66.7 MB/s throughput for legacy drives.
STS12 (signal): A SONET synchronous transport signal with a line rate of 622.08 Mbit/s, used for high-speed optical network transmissions.
SONET: Synchronous Optical Network; a standard for optical telecommunications transport providing multiplexing, framing, and protection.
Ultra DMA/66 (ATA-4): Another name for IDE (UDMA mode 4) indicating the transfer mode supporting about 66.7 MB/s using an 80-conductor IDE cable.

Quick Knowledge Check

What is the maximum theoretical throughput of IDE (UDMA mode 4)?

About 66.7 megabytes per second

622.08 megabits per second

12 × 51.84 megabits per second

STS12 is associated with which network technology?

Parallel ATA storage

SONET synchronous optical networks

USB data transfer

What should be considered due to different units in conversion?

Signal overhead in STS12

Difference between megabytes and megabits per second

Cable connector types

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter