What Is This Tool?
This converter enables you to translate data transfer values from IDE (UDMA-33) to IDE (UDMA mode 4), both legacy Parallel ATA transfer modes used in older computer storage interfaces. It helps in comparing throughput and configuring legacy hardware.
How to Use This Tool?
-
Select IDE (UDMA-33) as the source unit.
-
Select IDE (UDMA mode 4) as the target unit.
-
Input the data transfer value you want to convert.
-
Click the convert button to get the equivalent IDE (UDMA mode 4) value.
Key Features
-
Converts between IDE (UDMA-33) and IDE (UDMA mode 4) data transfer units.
-
Browser-based and easy to use without installations.
-
Supports benchmarking and troubleshooting of legacy PATA devices.
-
Includes theoretical conversion rates based on standard PATA interfaces.
Examples
-
2 IDE (UDMA-33) converts to 1 IDE (UDMA mode 4).
-
10 IDE (UDMA-33) converts to 5 IDE (UDMA mode 4).
Common Use Cases
-
Benchmarking older PATA hard drives and optical drives.
-
Configuring or troubleshooting BIOS or controller transfer modes.
-
Comparing legacy PATA performance when upgrading or replacing hardware.
Tips & Best Practices
-
Ensure the IDE cable type matches the required standard for proper signaling.
-
Use the conversion tool to compare throughput for hardware compatibility decisions.
-
Consult hardware manuals to confirm controller and cable support before upgrading.
Limitations
-
Maximum burst rates are theoretical; actual speeds depend on hardware and conditions.
-
IDE (UDMA mode 4) requires an 80-conductor cable, while IDE (UDMA-33) typically uses 40-conductor cables.
-
Conversion does not consider protocol or data integrity differences between modes.
Frequently Asked Questions
-
What is the conversion rate from IDE (UDMA-33) to IDE (UDMA mode 4)?
-
The conversion rate is 1 IDE (UDMA-33) equals 0.5 IDE (UDMA mode 4).
-
Can I use the same cable for both IDE (UDMA-33) and IDE (UDMA mode 4)?
-
No, IDE (UDMA mode 4) requires an 80-conductor cable, while IDE (UDMA-33) typically uses a 40-conductor cable.
-
Why convert between these two PATA transfer modes?
-
To compare data transfer rates for benchmarking, upgrading hardware, or troubleshooting legacy PC configurations.
Key Terminology
-
IDE (UDMA-33)
-
A Parallel ATA transfer mode also known as ATA/33 or Ultra DMA mode 4, with a max burst rate of 33.3 MB/s using DMA.
-
IDE (UDMA mode 4)
-
Also called Ultra DMA/66 (ATA-4), a PATA transfer mode offering about 66.7 MB/s throughput and requires an 80-conductor cable.
-
PATA
-
Parallel ATA, a standard for connecting storage devices using parallel data transfer.