What does IDE (UDMA-33) stand for?

IDE (UDMA-33), also known as ATA/33 or Ultra DMA mode 4, is a legacy Parallel ATA data transfer mode with a theoretical burst rate of 33.3 MB/s used in older hard drives and optical drives.

What is an STS1 (signal)?

STS1 (Synchronous Transport Signal level 1) is the fundamental SONET electrical unit with a line rate of 51.84 Mbps, used for synchronous optical networking and relates to the OC-1 optical carrier.

Why convert IDE (UDMA-33) to STS1 (signal)?

Converting between these units helps compare or integrate legacy PATA data transfer rates with modern SONET optical network signals, useful in performance benchmarking and system design.

How to Convert from IDE (UDMA-33) to STS1 (signal)

Learn the method to convert data transfer rates from IDE (UDMA-33), a legacy PATA mode, to STS1 (signal), the fundamental SONET transport unit, including practical use cases and limitations.

IDE (UDMA-33)

STS1 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA-33) to STS1 (signal) Conversion Table

IDE (UDMA-33)	STS1 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA-33) to STS1 (signal) Conversion Table
IDE (UDMA-33)	STS1 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter tool allows users to transform data transfer rates between IDE (UDMA-33), a legacy parallel ATA interface mode, and STS1 (signal), the basic SONET synchronous transport signal unit. It facilitates the comparison and integration of older PATA device speeds with modern optical network signal rates.

How to Use This Tool?

Enter the value in IDE (UDMA-33) units you wish to convert
Select IDE (UDMA-33) as the source unit and STS1 (signal) as the target unit
Submit the input to receive the equivalent value in STS1 (signal)
Use results for benchmarking, analysis, or configuring systems that combine legacy storage with telecom networks

Key Features

Converts data transfer values between IDE (UDMA-33) and STS1 (signal)
Supports benchmarking and performance analysis of legacy and modern technologies
Browser-based and straightforward to use
Supports conversions relevant to telecommunications, data networking, and legacy hardware

Examples

Converting 2 IDE (UDMA-33) results in approximately 10.19 STS1 (signal)
Converting 0.5 IDE (UDMA-33) yields about 2.55 STS1 (signal)

Common Use Cases

Benchmarking throughput of older PATA hard drives compared to synchronous optical signals
Configuring controllers or troubleshooting BIOS transfer modes in legacy computer systems
Designing or integrating systems that interface PATA drives with SONET/SDH optical networks
Provisioning or analyzing telecom point-to-point links using STS1

Tips & Best Practices

Ensure compatible hardware and cables when working with IDE (UDMA-33) to achieve accurate performance
Consider the network framing overhead in STS1 when integrating data transfer rates
Use this converter as a benchmark tool rather than precise real-world throughput measurement
Verify system compatibility when bridging between legacy storage and modern telecom infrastructures

Limitations

IDE (UDMA-33) is a legacy mode with theoretical maximum rates that may not reflect actual speeds
STS1 includes network overhead which affects the effective user data throughput
Conversion assumes ideal conditions and does not factor in actual signal encoding or error correction
This tool does not adjust for transmission protocols or losses present in practical environments

Frequently Asked Questions

What does IDE (UDMA-33) stand for?: IDE (UDMA-33), also known as ATA/33 or Ultra DMA mode 4, is a legacy Parallel ATA data transfer mode with a theoretical burst rate of 33.3 MB/s used in older hard drives and optical drives.
What is an STS1 (signal)?: STS1 (Synchronous Transport Signal level 1) is the fundamental SONET electrical unit with a line rate of 51.84 Mbps, used for synchronous optical networking and relates to the OC-1 optical carrier.
Why convert IDE (UDMA-33) to STS1 (signal)?: Converting between these units helps compare or integrate legacy PATA data transfer rates with modern SONET optical network signals, useful in performance benchmarking and system design.

Key Terminology

IDE (UDMA-33): A Parallel ATA data-transfer mode using Ultra DMA mode 4 that supports a burst rate around 33.3 MB/s for legacy storage devices.
STS1 (signal): The basic SONET synchronous transport signal unit with a 51.84 Mbps line rate, fundamental for optical network traffic transport.
SONET: Synchronous Optical Networking, a standardized digital communication protocol that multiplexes multiple digital bit streams over optical fiber.

Quick Knowledge Check

What is the maximum theoretical burst rate of IDE (UDMA-33)?

51.84 MB/s

33.3 MB/s

125 MB/s

STS1 signal corresponds to which optical carrier level?

OC-3

OC-1

OC-12

Why is IDE (UDMA-33) considered legacy technology?

It uses direct memory access

It is an older PATA standard with lower data rates

It has SONET framing overhead

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter