What does IDE (UDMA-33) represent?

IDE (UDMA-33) is a legacy Parallel ATA data-transfer mode with a maximum theoretical burst rate of 33.3 MB/s, used mainly in older hard drives and optical drives.

What is STS192 (signal) used for?

STS192 (signal) is a high-speed synchronous transport signal in the SONET family, used for carrier backbone and high-capacity network links.

Why convert between IDE (UDMA-33) and STS192 (signal)?

Converting helps compare legacy storage data rates with modern telecommunications transport levels for benchmarking and network planning.

How to Convert from IDE (UDMA-33) to STS192 (signal)?

Convert data transfer rates from the legacy IDE (UDMA-33) standard to the high-speed STS192 (signal) level using this straightforward online converter.

IDE (UDMA-33)

STS192 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA-33) to STS192 (signal) Conversion Table

IDE (UDMA-33)	STS192 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA-33) to STS192 (signal) Conversion Table
IDE (UDMA-33)	STS192 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to translate data transfer rates from IDE (UDMA-33), a legacy PATA transfer mode, to STS192 (signal), a high-speed synchronous transport signal used in SONET networks. It's useful for comparing or integrating different data rate standards in computing and telecommunications.

How to Use This Tool?

Enter the data transfer value in IDE (UDMA-33) units
Select IDE (UDMA-33) as the input unit and STS192 (signal) as the output unit
Click convert to see the equivalent STS192 (signal) value based on the conversion formula

Key Features

Converts data transfer units from IDE (UDMA-33) to STS192 (signal)
Applicable for legacy PATA interfaces and modern SONET transport levels
Browser-based and easy to use with direct conversion rates
Useful for networking and hardware performance analysis
Provides example conversions for quick reference

Examples

10 IDE (UDMA-33) equals approximately 0.2652 STS192 (signal)
100 IDE (UDMA-33) equals approximately 2.6524 STS192 (signal)

Common Use Cases

Benchmarking data throughput of older PATA hard drives and optical drives
Planning and performance analysis in telecommunications infrastructure
Comparing legacy storage interface speeds to modern high-speed carrier networks
Configuring or troubleshooting BIOS and controllers on older PCs
Designing carrier network equipment that integrates varied data rate standards

Tips & Best Practices

Ensure units are correctly selected before conversion to avoid incorrect results
Use this tool primarily for comparison and benchmarking between legacy and modern standards
Consult relevant network or hardware documentation when applying conversion results
Remember the converter provides theoretical equivalence, actual rates may vary
Be aware of hardware and environmental factors that affect real-world transfer rates

Limitations

IDE (UDMA-33) is an older standard with limited maximum throughput
STS192 (signal) represents very high-speed transport not directly compatible with IDE transfers
Conversions are theoretical and meant for comparisons, not direct data translation
Real data transfer speeds may be impacted by device and environmental constraints

Frequently Asked Questions

What does IDE (UDMA-33) represent?: IDE (UDMA-33) is a legacy Parallel ATA data-transfer mode with a maximum theoretical burst rate of 33.3 MB/s, used mainly in older hard drives and optical drives.
What is STS192 (signal) used for?: STS192 (signal) is a high-speed synchronous transport signal in the SONET family, used for carrier backbone and high-capacity network links.
Why convert between IDE (UDMA-33) and STS192 (signal)?: Converting helps compare legacy storage data rates with modern telecommunications transport levels for benchmarking and network planning.

Key Terminology

IDE (UDMA-33): A Parallel ATA data-transfer mode that uses direct memory access with a burst rate of approximately 33.3 MB/s, utilized in legacy hard drives and optical drives.
STS192 (signal): An electrical framing rate in the SONET standard representing 192 times STS-1 signals, equivalent to about 9.95328 Gbit/s.
SONET: Synchronous Optical Network, a standardized digital communication protocol used to transmit multiple digital bit streams over optical fiber.

Quick Knowledge Check

What is the maximum theoretical burst rate of IDE (UDMA-33)?

33.3 MB/s

51.84 Mb/s

9.95328 Gbit/s

STS192 (signal) corresponds to which data rate?

33.3 MB/s

9.95328 Gbit/s

266 Mb/s

What is a primary use case for converting IDE (UDMA-33) to STS192 (signal)?

Direct data translation between devices

Performance benchmarking across different technologies

Configuring modern optical networks

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter