What does IDE (UDMA-33) stand for?

IDE (UDMA-33) is a Parallel ATA data-transfer mode using Ultra DMA mode 4, achieving up to 33.3 MB/s burst rate on compatible hardware.

Why convert IDE (UDMA-33) speeds to byte/second?

Converting to byte/second standardizes legacy transfer rates to modern digital throughput units, helping with benchmarking and performance comparisons.

Can the actual transfer speed be different from the converted value?

Yes, actual speeds depend on hardware limitations, cable quality, system overhead, and device condition, so real rates might be lower than theoretical values.

Convert IDE (UDMA-33) to Byte/second [B/s] Easily

Use this online converter to transform IDE (UDMA-33) data transfer rates into byte/second [B/s]. Ideal for benchmarking legacy PATA hard drives and expressing speeds in modern units.

IDE (UDMA-33)

Byte/second [B/s]

Please check your input. It must be a valid numeric value.

IDE (UDMA-33) to Byte/second [B/s] Conversion Table

IDE (UDMA-33)	Byte/second [B/s]

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA-33) to Byte/second [B/s] Conversion Table
IDE (UDMA-33)	Byte/second [B/s]

Explore More Data Transfer Units Converter

What Is This Tool?

This converter translates data transfer speeds from IDE (UDMA-33), a legacy Parallel ATA data-transfer mode, into byte per second (B/s), a standard unit for expressing digital throughput. It helps users understand and report older drive transfer rates in commonly used units.

How to Use This Tool?

Enter the value in IDE (UDMA-33) units you want to convert
Select IDE (UDMA-33) as the source unit and byte/second [B/s] as the target unit
Click the convert button to see the equivalent data transfer rate in byte/second

Key Features

Converts IDE (UDMA-33) speeds to byte/second [B/s]
Easy-to-use browser-based interface
Supports benchmarking and legacy hardware analysis
Facilitates performance comparison across different storage devices

Examples

2 IDE (UDMA-33) converts to 66,000,000 byte/second [B/s]
0.5 IDE (UDMA-33) converts to 16,500,000 byte/second [B/s]

Common Use Cases

Benchmarking or reporting throughput of legacy PATA hard drives and optical drives
Configuring or troubleshooting BIOS/controller transfer modes on older PCs
Comparing legacy PATA performance during hardware upgrades or replacements
Expressing legacy device speeds in standardized digital throughput units

Tips & Best Practices

Use the tool to convert burst rates into commonly understood units for easier comparison
Keep in mind that actual data rates may differ from theoretical maximums
Scale byte/second results using SI prefixes such as MB/s for clarity
Verify cable and controller compatibility when benchmarking legacy devices

Limitations

IDE (UDMA-33) reflects a theoretical max burst rate; real speeds may be lower
Conversion assumes ideal hardware and conditions that may not reflect actual performance
Byte/second units are often scaled for practical readability
Factors like cable quality, system overhead, and drive condition affect real throughput

Frequently Asked Questions

What does IDE (UDMA-33) stand for?: IDE (UDMA-33) is a Parallel ATA data-transfer mode using Ultra DMA mode 4, achieving up to 33.3 MB/s burst rate on compatible hardware.
Why convert IDE (UDMA-33) speeds to byte/second?: Converting to byte/second standardizes legacy transfer rates to modern digital throughput units, helping with benchmarking and performance comparisons.
Can the actual transfer speed be different from the converted value?: Yes, actual speeds depend on hardware limitations, cable quality, system overhead, and device condition, so real rates might be lower than theoretical values.

Key Terminology

IDE (UDMA-33): A Parallel ATA transfer mode, also known as ATA/33 or Ultra DMA mode 4, supporting burst rates up to 33.3 MB/s under ideal conditions.
Byte/second [B/s]: A unit measuring the number of bytes transferred each second, commonly used to express digital data transfer speeds.
DMA (Direct Memory Access): A method that transfers data directly between hardware and memory without CPU intervention, increasing data throughput.

Quick Knowledge Check

What is the approximate maximum theoretical burst rate of IDE (UDMA-33)?

33.3 MB/s

50 MB/s

10 MB/s

When converting IDE (UDMA-33) to byte/second, the unit byte/second measures what?

Number of bytes transferred per second

Bytes stored in memory

Size of a byte in bits

Which scenario is suitable for using this converter?

Benchmarking legacy PATA hard drive performance

Measuring internet speed in Mbps

Converting file sizes

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter