What is IDE (UDMA-33)?

IDE (UDMA-33) is a legacy parallel ATA data transfer mode with a theoretical burst speed of 33.3 MB/s used in older hard drives and optical drives.

Why convert IDE (UDMA-33) to terabyte/second (SI def.)?

Converting to terabyte/second allows users to express legacy transfer rates in modern units relevant for high-performance computing and data center environments.

Can I use this conversion for sustained performance measurement?

No, IDE (UDMA-33) values represent maximum theoretical burst rates and may not reflect sustained data transfer speeds.

What is the conversion rate from IDE (UDMA-33) to terabyte/second?

One IDE (UDMA-33) equals 0.000033 terabyte per second according to the SI definition.

Are there differences when comparing these units in practice?

Yes, differences in byte definitions and transfer overhead should be considered when comparing real-world data transfer measurements.

How to Convert from IDE (UDMA-33) to Terabyte/second (SI def.)?

Learn how to convert data transfer rates from IDE (UDMA-33), a legacy PATA standard, to terabyte per second (SI definition), a high-performance data throughput unit used in modern computing.

IDE (UDMA-33)

Terabyte/second (SI def.)

Please check your input. It must be a valid numeric value.

IDE (UDMA-33) to Terabyte/second (SI def.) Conversion Table

IDE (UDMA-33)	Terabyte/second (SI def.)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA-33) to Terabyte/second (SI def.) Conversion Table
IDE (UDMA-33)	Terabyte/second (SI def.)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows users to transform data transfer rates measured in IDE (UDMA-33), a legacy parallel ATA transfer mode, into terabyte per second (SI definition) units. This is useful for comparing older hardware performance with contemporary high-speed data transfer metrics.

How to Use This Tool?

Enter the data transfer rate value using the IDE (UDMA-33) unit.
Select IDE (UDMA-33) as the source unit if needed.
Choose terabyte/second (SI definition) as the target unit.
Click convert to see the equivalent transfer rate in terabyte per second.
Use the result to compare or report data transfer rates in modern units.

Key Features

Converts IDE (UDMA-33) data transfer rates to terabyte/second (SI def.) units.
Supports comparison between legacy and modern data transfer standards.
Expresses legacy PATA speeds in a standardized, high-performance computing context.
Simple formula-based conversion with a fixed conversion rate.
Browser-based and easy to use for quick data rate translations.

Examples

Converting 10 IDE (UDMA-33) results in 0.00033 terabyte/second (SI def.).
Converting 50 IDE (UDMA-33) results in 0.00165 terabyte/second (SI def.).

Common Use Cases

Benchmarking the throughput of legacy PATA hard drives and optical drives.
Configuring or troubleshooting older PC BIOS or controller transfer modes.
Comparing performance when upgrading or replacing legacy drives.
Specifying bandwidth in high-performance computing clusters using modern units.
Measuring throughput in data center storage arrays and backbone links.

Tips & Best Practices

Check that the hardware supports IDE (UDMA-33) to ensure meaningful data.
Use conversions to integrate legacy device metrics within modern contexts.
Remember the conversion rate maps theoretical peak speeds, not sustained rates.
Consider unit definitions differences and overhead when interpreting results.
Utilize results for high-level comparisons rather than precise performance measures.

Limitations

IDE (UDMA-33) speeds indicate theoretical maximum burst rates, not sustained throughput.
Converted values are very small and may be negligible in high-speed applications.
Differences in binary versus decimal byte definitions and overhead affect real-world accuracy.

Frequently Asked Questions

What is IDE (UDMA-33)?: IDE (UDMA-33) is a legacy parallel ATA data transfer mode with a theoretical burst speed of 33.3 MB/s used in older hard drives and optical drives.
Why convert IDE (UDMA-33) to terabyte/second (SI def.)?: Converting to terabyte/second allows users to express legacy transfer rates in modern units relevant for high-performance computing and data center environments.
Can I use this conversion for sustained performance measurement?: No, IDE (UDMA-33) values represent maximum theoretical burst rates and may not reflect sustained data transfer speeds.
What is the conversion rate from IDE (UDMA-33) to terabyte/second?: One IDE (UDMA-33) equals 0.000033 terabyte per second according to the SI definition.
Are there differences when comparing these units in practice?: Yes, differences in byte definitions and transfer overhead should be considered when comparing real-world data transfer measurements.

Key Terminology

IDE (UDMA-33): A Parallel ATA data-transfer mode with up to 33.3 MB/s burst rate, used in older hard drives and optical drives.
Terabyte per second (SI definition): A unit of data transfer rate equal to one trillion bytes moved per second, used to quantify very high throughput.
Burst rate: The maximum theoretical data transfer speed achievable in short bursts under ideal conditions.
PATA: Parallel ATA, an older interface standard for connecting storage devices.

Quick Knowledge Check

What does IDE (UDMA-33) represent?

A modern high-speed data transfer protocol

A legacy parallel ATA data transfer mode with a max burst rate of 33.3 MB/s

A unit measuring data storage capacity

Which unit is used to express extremely high data transfer rates in modern systems?

IDE (UDMA-33)

Terabyte per second (SI definition)

Megabyte per second

Why are IDE (UDMA-33) to terabyte/second converted values usually very small?

Because IDE (UDMA-33) is faster than terabyte/second units

Because terabyte/second units represent much larger data rates

Because the conversion is approximate

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter