What does IDE (UDMA-33) mean?

IDE (UDMA-33) refers to a legacy Parallel ATA data transfer mode for IDE/ATA drives using direct memory access with a theoretical burst rate of about 33.3 MB/s.

Why convert IDE (UDMA-33) to kilobit per second?

Converting to kilobit/second allows users to express legacy PATA transfer rates in a standard unit common in networking and digital communications.

Is the IDE (UDMA-33) rate a sustained transfer speed?

No, the IDE (UDMA-33) value represents a theoretical maximum burst rate and may not reflect actual sustained throughput.

How to Convert from IDE (UDMA-33) to Kilobit/second (SI def.)?

Learn how to convert data transfer rates from the legacy IDE (UDMA-33) standard to kilobit per second (SI definition) for better analysis and comparison in digital communication contexts.

IDE (UDMA-33)

Kilobit/second (SI def.)

Please check your input. It must be a valid numeric value.

IDE (UDMA-33) to Kilobit/second (SI def.) Conversion Table

IDE (UDMA-33)	Kilobit/second (SI def.)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA-33) to Kilobit/second (SI def.) Conversion Table
IDE (UDMA-33)	Kilobit/second (SI def.)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter translates the data transfer rate of the IDE (UDMA-33) interface, a legacy PATA mode, into the kilobit per second unit defined by SI standards. It enables users to understand, benchmark, and compare older hardware data rates using a standardized digital communication metric.

How to Use This Tool?

Enter the value in IDE (UDMA-33) units you want to convert.
Select IDE (UDMA-33) as the input unit and kilobit/second (SI def.) as the output unit.
Click the convert button to see the equivalent data transfer rate in kilobit/second.
Use the results to analyze or compare legacy hardware transfer speeds in modern units.

Key Features

Converts data rates from IDE (UDMA-33) to kilobit/second (SI def.)
Supports benchmarking and performance analysis of legacy PATA drives
Facilitates configuration and troubleshooting of older PC BIOS and controllers
Provides standardized output suitable for networking and telemetry use
Includes example conversions for ease of understanding

Examples

1 IDE (UDMA-33) converts to 264000 kilobit/second
0.5 IDE (UDMA-33) converts to 132000 kilobit/second

Common Use Cases

Benchmarking data throughput of older PATA hard drives and optical drives
Configuring BIOS or controller settings on legacy PCs for correct DMA operation
Comparing performance when upgrading or replacing legacy drives
Describing low-bandwidth network and telemetry data rates using kilobit/second
Reporting legacy modem or early internet connection speeds
Specifying control channel rates in embedded and sensor network systems

Tips & Best Practices

Verify the selected data unit matches your device's transfer mode before converting
Use the conversion to translate legacy performance into modern networking terms
Remember the IDE (UDMA-33) rate is a maximum theoretical burst and not sustained throughput
Be aware that kilobit/second uses decimal multiples, which may differ from binary units in some contexts
Utilize conversions to assist in configuring compatible hardware and cables

Limitations

IDE (UDMA-33) rates represent maximum burst speeds, not continuous transfer
Real-world performance may vary due to hardware and environmental factors
Kilobit/second measurements assume decimal units, potentially causing unit confusion in legacy systems
The conversion does not include detailed throughput or error margin information

Frequently Asked Questions

What does IDE (UDMA-33) mean?: IDE (UDMA-33) refers to a legacy Parallel ATA data transfer mode for IDE/ATA drives using direct memory access with a theoretical burst rate of about 33.3 MB/s.
Why convert IDE (UDMA-33) to kilobit per second?: Converting to kilobit/second allows users to express legacy PATA transfer rates in a standard unit common in networking and digital communications.
Is the IDE (UDMA-33) rate a sustained transfer speed?: No, the IDE (UDMA-33) value represents a theoretical maximum burst rate and may not reflect actual sustained throughput.

Key Terminology

IDE (UDMA-33): A Parallel ATA data transfer mode using direct memory access with a maximum theoretical burst rate of approximately 33.3 MB/s, used mainly for older hard drives and optical drives.
Kilobit per second (SI def.): A unit measuring data transfer rate equal to 1,000 bits transmitted per second, commonly used in networking and embedded systems.
Data Transfer Rate: The speed at which data is moved from one place to another, often measured in bits per second or bytes per second.

Quick Knowledge Check

What is IDE (UDMA-33) primarily used for?

Describing network speeds in IoT devices

A legacy PATA transfer mode for hard drives and optical drives

Measuring wireless sensor telemetry rates

How many kilobits per second equal 1 IDE (UDMA-33)?

1,000

264,000

33,300

What should be considered about IDE (UDMA-33) transfer rates?

They represent maximum theoretical speeds, not sustained rates

They are always higher than actual transfer rates in kilobit/second

They are calculated using binary multiples

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter