What is IDE (UDMA-33)?

IDE (UDMA-33) is a legacy Parallel ATA data-transfer mode used for older hard drives and optical drives, offering a maximum theoretical burst rate of 33.3 MB/s.

What does STM-64 (signal) represent?

STM-64 is a high-speed synchronous transport signal standard in the Synchronous Digital Hierarchy, with a line rate of approximately 10 Gbit/s used in carrier backbone networks.

Why convert IDE (UDMA-33) to STM-64?

Converting between these units helps relate legacy storage device speeds to telecommunications network capacities for planning, benchmarking, or integration purposes.

Convert IDE (UDMA-33) to STM-64 (signal) Data Transfer Units

Easily convert data transfer speeds from IDE (UDMA-33), a legacy PATA mode, to STM-64 (signal), a modern SDH network standard, for comparison and planning.

IDE (UDMA-33)

STM-64 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA-33) to STM-64 (signal) Conversion Table

IDE (UDMA-33)	STM-64 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA-33) to STM-64 (signal) Conversion Table
IDE (UDMA-33)	STM-64 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to translate data transfer rates from IDE (UDMA-33), a Parallel ATA legacy data-transfer mode used in older drives, into STM-64 (signal), a high-capacity telecommunications signal standard in the Synchronous Digital Hierarchy.

How to Use This Tool?

Enter the value in IDE (UDMA-33) units that you want to convert.
Select IDE (UDMA-33) as the original unit and STM-64 (signal) as the target unit.
Click the convert button to view the equivalent STM-64 (signal) value.
Use results to compare or relate legacy storage speeds to modern network capacities.

Key Features

Converts IDE (UDMA-33) data rates to STM-64 (signal) units accurately.
Supports comparison between legacy PATA hard drive transfer speeds and modern SDH network line rates.
Browser-based tool that requires no installation.
Uses a fixed conversion factor reflecting theoretical maximum rates.
Useful for hardware diagnostics, network engineering, and capacity planning.

Examples

5 IDE (UDMA-33) units convert to approximately 0.1326 STM-64 (signal).
10 IDE (UDMA-33) units convert to approximately 0.2652 STM-64 (signal).

Common Use Cases

Benchmarking throughput of older PATA hard drives and optical drives.
Configuring or troubleshooting BIOS or controller settings on legacy systems.
Comparing legacy storage device performance with modern network signals.
Telecommunications network design involving integration of legacy systems.
Carrier backbone network capacity planning and analysis.

Tips & Best Practices

Verify compatibility and cable requirements when working with IDE (UDMA-33) devices.
Consider that maximum theoretical rates do not always reflect real-world throughput.
Use this tool for understanding relative data speeds rather than precise performance metrics.
Apply conversions to aid in capacity planning or legacy hardware support decisions.

Limitations

IDE (UDMA-33) speeds are significantly lower than STM-64 line rates, limiting direct networking application.
Conversion values are theoretical burst or line rates and may not reflect actual data transfer rates.
Practical use is mostly limited to performance analysis or supporting legacy systems due to hardware constraints.

Frequently Asked Questions

What is IDE (UDMA-33)?: IDE (UDMA-33) is a legacy Parallel ATA data-transfer mode used for older hard drives and optical drives, offering a maximum theoretical burst rate of 33.3 MB/s.
What does STM-64 (signal) represent?: STM-64 is a high-speed synchronous transport signal standard in the Synchronous Digital Hierarchy, with a line rate of approximately 10 Gbit/s used in carrier backbone networks.
Why convert IDE (UDMA-33) to STM-64?: Converting between these units helps relate legacy storage device speeds to telecommunications network capacities for planning, benchmarking, or integration purposes.

Key Terminology

IDE (UDMA-33): A legacy Parallel ATA data-transfer mode for older drives with a maximum theoretical burst rate of 33.3 MB/s, also known as ATA/33 or Ultra DMA mode 4.
STM-64 (signal): A Synchronous Transport Module level-64 signal in SDH, with a line rate near 10 Gbit/s, used in carrier backbone networks and equivalent to SONET OC-192.
Synchronous Digital Hierarchy (SDH): A telecommunications network transmission standard organizing data into synchronous modules for high-speed transport.

Quick Knowledge Check

What type of interface uses IDE (UDMA-33)?

Fiber optic networks

Parallel ATA (PATA) interfaces

Synchronous Digital Hierarchy (SDH)

What is the approximate line rate of STM-64 (signal)?

33.3 MB/s

9.95328 Gbit/s

100 MB/s

Which use case is appropriate for converting IDE (UDMA-33) to STM-64?

Direct networking applications

Performance comparison between legacy drives and modern network signals

Replacing STM-64 devices with IDE drives

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter