What Is This Tool?
This tool converts data transfer values from IDE (UDMA mode 4), a legacy Parallel ATA transfer mode, to SCSI (Sync), a synchronous SCSI protocol transfer method. It helps compare and integrate performance values across these distinct storage interfaces.
How to Use This Tool?
-
Enter the value in IDE (UDMA mode 4) units you want to convert
-
Select IDE (UDMA mode 4) as the source unit and SCSI (Sync) as the target unit
-
Click the convert button to receive the equivalent SCSI (Sync) value
-
Use the conversion result for comparing or analyzing data transfer rates
Key Features
-
Converts data transfer rates from IDE (UDMA mode 4) to SCSI (Sync)
-
Provides a simple interface for legacy computing storage comparisons
-
Supports benchmarking and troubleshooting of mixed storage environments
-
Displays conversion based on the specified conversion rate of 1 IDE (UDMA mode 4) to 13.2 SCSI (Sync)
Examples
-
2 IDE (UDMA mode 4) equals 26.4 SCSI (Sync)
-
0.5 IDE (UDMA mode 4) equals 6.6 SCSI (Sync)
Common Use Cases
-
Comparing legacy IDE device transfer speeds with SCSI protocol performance
-
Benchmarking and troubleshooting in systems with both IDE and SCSI storage devices
-
Configuring or maintaining mixed storage environments in IT and hardware industries
Tips & Best Practices
-
Use the conversion results as approximate comparisons due to protocol differences
-
Verify device-specific negotiated parameters for precise SCSI (Sync) data rates
-
Consider hardware and cabling quality since real-world throughput may vary from theoretical values
Limitations
-
IDE (UDMA mode 4) theoretical throughput may not reflect actual sustained transfer speeds
-
SCSI (Sync) rates vary depending on negotiation between devices, impacting exact equivalency
-
Conversions provide rough comparisons, not exact transfer rate matches due to protocol overhead and behavior differences
Frequently Asked Questions
-
What does IDE (UDMA mode 4) refer to?
-
IDE (UDMA mode 4), also known as Ultra DMA/66 (ATA-4), is a Parallel ATA transfer mode using Ultra DMA protocol for moving data with a maximum throughput of about 66.7 megabytes per second.
-
What is SCSI (Sync) mode?
-
SCSI (Sync) is a synchronous transfer mode in the SCSI protocol where data is sent in sync with a negotiated clock for consistent timing and higher throughput than asynchronous transfers.
-
Why convert IDE (UDMA mode 4) to SCSI (Sync)?
-
Converting helps compare or integrate performance metrics between legacy IDE devices and SCSI protocol systems, facilitating benchmarking, troubleshooting, and mixed environment management.
Key Terminology
-
IDE (UDMA mode 4)
-
A Parallel ATA transfer mode also called Ultra DMA/66 (ATA-4), used for transferring data with a maximum theoretical throughput of approximately 66.7 megabytes per second.
-
SCSI (Sync)
-
A synchronous transfer mode in the SCSI protocol where data is transferred in sync with a negotiated clock for improved throughput and timing.
-
Conversion Rate
-
The value used to convert one unit from IDE (UDMA mode 4) to the equivalent in SCSI (Sync), specifically 1 IDE (UDMA mode 4) equals 13.2 SCSI (Sync).