What does IDE (UDMA mode 4) represent?

IDE (UDMA mode 4) is a Parallel ATA transfer mode using Ultra DMA protocol to transfer data at a theoretical maximum of about 66.7 megabytes per second, mainly used in legacy PCs and devices.

What is STS1 (payload) in SONET terminology?

STS1 (payload) refers to the user data capacity inside an STS-1 frame with a usable Synchronous Payload Envelope capacity of 50.112 Mbps, used in optical transport networks.

Can this converter be used for real-time data transfer measurement?

No, the converter uses theoretical throughput values and does not account for real-world overhead or protocol inefficiencies, so it is intended for comparative and planning purposes.

How to Convert from IDE (UDMA mode 4) to STS1 (payload)?

Convert data transfer rates from IDE (UDMA mode 4) to STS1 (payload) to compare legacy IDE/ATA interface speeds with SONET optical network payload capacities using this unit converter tool.

IDE (UDMA mode 4)

STS1 (payload)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 4) to STS1 (payload) Conversion Table

IDE (UDMA mode 4)	STS1 (payload)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 4) to STS1 (payload) Conversion Table
IDE (UDMA mode 4)	STS1 (payload)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool helps convert data transfer rates from IDE (UDMA mode 4), a Parallel ATA transfer mode primarily used in legacy computer systems, to STS1 (payload), which represents the user data capacity inside a SONET STS-1 frame. It aids in translating throughput values between older storage technologies and modern optical network terms.

How to Use This Tool?

Enter the data transfer value in IDE (UDMA mode 4) units
Select IDE (UDMA mode 4) as the source unit and STS1 (payload) as the target unit
Click the convert button to get the equivalent value in STS1 (payload)

Key Features

Converts data rates between IDE (UDMA mode 4) and STS1 (payload) units
Useful for benchmarking and capacity planning in legacy and telecom environments
Browser-based and user-friendly interface for quick calculations
Supports conversions relevant to storage device and optical transport comparisons

Examples

2 IDE (UDMA mode 4) equals approximately 21.3333 STS1 (payload)
0.5 IDE (UDMA mode 4) equals approximately 5.3333 STS1 (payload)

Common Use Cases

Comparing data rates between legacy IDE/ATA hard drive interfaces and SONET payload capacities
Capacity planning for network operators using SONET optical transport systems
Benchmarking and analyzing throughput of older storage hardware in modern terms
Integrating legacy storage throughput metrics into telecommunications frameworks

Tips & Best Practices

Ensure accurate input values for reliable conversion results
Use this tool for theoretical throughput comparisons, not real-time performance assessments
Account for context such as network overhead and inefficiencies when applying converted values
Combine this conversion with other network planning tools for comprehensive analysis

Limitations

Conversion is based on theoretical maximum throughput figures only
Does not consider practical factors like signal degradation or protocol overhead
Actual achievable data rates may be lower in real-world scenarios
Assumes steady-state maximum throughput which may not reflect typical operating conditions

Frequently Asked Questions

What does IDE (UDMA mode 4) represent?: IDE (UDMA mode 4) is a Parallel ATA transfer mode using Ultra DMA protocol to transfer data at a theoretical maximum of about 66.7 megabytes per second, mainly used in legacy PCs and devices.
What is STS1 (payload) in SONET terminology?: STS1 (payload) refers to the user data capacity inside an STS-1 frame with a usable Synchronous Payload Envelope capacity of 50.112 Mbps, used in optical transport networks.
Can this converter be used for real-time data transfer measurement?: No, the converter uses theoretical throughput values and does not account for real-world overhead or protocol inefficiencies, so it is intended for comparative and planning purposes.

Key Terminology

IDE (UDMA mode 4): A Parallel ATA transfer mode known as Ultra DMA/66 (ATA-4), used to transfer blocks of data between a drive and host with a theoretical maximum throughput of around 66.7 MB/s.
STS1 (payload): In SONET, the user data capacity inside an STS-1 frame, with a line rate of 51.84 Mbps and a usable payload capacity of 50.112 Mbps.
SONET: Synchronous Optical Networking, a standardized digital communication protocol used to transmit multiple digital bit streams over optical fiber.

Quick Knowledge Check

What is the maximum theoretical throughput of IDE (UDMA mode 4)?

66.7 megabytes per second

50.112 megabits per second

10.6667 STS1 (payload)

What is the usable payload capacity of STS1 in Mbps?

66.7 Mbps

50.112 Mbps

10.6667 Mbps

What is a typical use case for converting IDE to STS1 (payload)?

Measuring real-time network throughput

Comparing legacy storage data rates to optical network capacities

Calculating cable lengths for IDE drives

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter