What does IDE (UDMA mode 4) refer to?

IDE (UDMA mode 4), also called Ultra DMA/66, is a Parallel ATA transfer mode used in older PC systems to move data at about 66.7 megabytes per second using an 80-conductor IDE cable.

What is STS3c (signal) used for?

STS3c (Synchronous Transport Signal level 3, concatenated) is a SONET electrical signal representing a contiguous high-bandwidth payload used in telecom networks for transporting data at 155.52 Mbit/s.

Why convert from IDE (UDMA mode 4) to STS3c (signal)?

The conversion helps users translate legacy IDE/ATA data rates into standardized telecom SONET rates for network provisioning, equipment compatibility, and integrating older storage with modern telecommunications.

Are the conversion rates exact in real use?

No, conversion rates represent theoretical maximum throughput; actual transfer speeds can be lower due to overhead and environmental factors.

How to Convert from IDE (UDMA mode 4) to STS3c (signal)?

Convert data transfer rates from IDE (UDMA mode 4), an older Parallel ATA standard, to STS3c (signal), a telecom SONET electrical transport rate, for applications in legacy hardware and network provisioning.

IDE (UDMA mode 4)

STS3c (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 4) to STS3c (signal) Conversion Table

IDE (UDMA mode 4)	STS3c (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 4) to STS3c (signal) Conversion Table
IDE (UDMA mode 4)	STS3c (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter transforms data transfer values from IDE (UDMA mode 4), a legacy Parallel ATA transfer mode, into STS3c (signal) units used in telecom SONET networks. It helps bridge the understanding between older PC storage speeds and modern high-bandwidth telecommunications transport rates.

How to Use This Tool?

Enter the value in IDE (UDMA mode 4) transfer units
Select IDE (UDMA mode 4) as the input unit
Choose STS3c (signal) as the output unit
Click convert to obtain the equivalent value in STS3c (signal)
Use the results to compare or translate data transfer throughput between standards

Key Features

Converts IDE (UDMA mode 4) data transfer rates to STS3c (signal) units
Supports comparison of legacy PC transfer modes with telecom SONET rates
Easy-to-use, browser-based unit conversion tool
Provides relevant use cases for storage and telecom applications
Displays typical examples to guide users

Examples

1 IDE (UDMA mode 4) equals approximately 3.395 STS3c (signal)
2 IDE (UDMA mode 4) convert to about 6.79 STS3c (signal)

Common Use Cases

Connecting and troubleshooting legacy PATA/IDE drives supporting ATA-66 in older PCs
Converting IDE transfer speeds to SONET rates for telecom backbone provisioning
Data recovery and benchmarking of older storage hardware
Provisioning 155.52 Mbps leased lines or backbone circuits using STS3c in networks
Interconnecting metro or backhaul SONET equipment carrying aggregated traffic

Tips & Best Practices

Use this conversion for theoretical throughput comparisons only
Consider legacy hardware conditions when interpreting IDE (UDMA mode 4) speeds
Remember telecom SONET rates represent standardized signal levels for network equipment
Verify signaling standards and compatibility when integrating different technologies
Apply conversions carefully in network design or data recovery scenarios

Limitations

Transfer speeds are theoretical maximums; actual rates might be lower due to overhead
IDE (UDMA mode 4) is largely obsolete and specific to older PC hardware
STS3c (signal) applies to telecom SONET signaling and may lack practical direct equivalence
Conversions assume ideal conditions without accounting for protocol overhead or error correction

Frequently Asked Questions

What does IDE (UDMA mode 4) refer to?: IDE (UDMA mode 4), also called Ultra DMA/66, is a Parallel ATA transfer mode used in older PC systems to move data at about 66.7 megabytes per second using an 80-conductor IDE cable.
What is STS3c (signal) used for?: STS3c (Synchronous Transport Signal level 3, concatenated) is a SONET electrical signal representing a contiguous high-bandwidth payload used in telecom networks for transporting data at 155.52 Mbit/s.
Why convert from IDE (UDMA mode 4) to STS3c (signal)?: The conversion helps users translate legacy IDE/ATA data rates into standardized telecom SONET rates for network provisioning, equipment compatibility, and integrating older storage with modern telecommunications.
Are the conversion rates exact in real use?: No, conversion rates represent theoretical maximum throughput; actual transfer speeds can be lower due to overhead and environmental factors.

Key Terminology

IDE (UDMA mode 4): A Parallel ATA transfer mode using Ultra DMA protocol for data transfer at about 66.7 megabytes per second in legacy PC hardware.
STS3c (signal): A SONET electrical transport signal representing a concatenated payload of three STS-1 channels, used in telecom for 155.52 Mbit/s data rates.
SONET: Synchronous Optical Network, a standardized digital communication protocol used to transmit multiple digital bit streams over optical fiber.

Quick Knowledge Check

What type of data transfer does IDE (UDMA mode 4) represent?

A telecom SONET signal rate

A Parallel ATA transfer mode for legacy PC hardware

An optical fiber transmission standard

STS3c (signal) is best described as:

A concatenated payload in SONET carrying high-bandwidth data

A type of IDE cable

An older PC hard drive standard

Which use case matches converting IDE (UDMA mode 4) to STS3c (signal)?

Comparing legacy PC storage rates with telecom network speeds

Setting up wireless networks

Measuring CPU clock speeds

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter