What does SCSI (Sync) mode mean?

SCSI (Sync) mode refers to a synchronous transfer method in the SCSI protocol where data transfer is coordinated with a clock signal, enabling higher data throughput and consistent timing.

What is IDE (UDMA mode 4)?

IDE (UDMA mode 4), or Ultra DMA/66, is a Parallel ATA transfer mode supporting a maximum theoretical throughput of about 66.7 MB/s, requiring an 80-conductor IDE cable.

Can I use this converter to directly connect SCSI and IDE devices?

No, this converter compares data transfer rates but does not address physical compatibility or signaling differences between SCSI and IDE standards.

How to Convert from SCSI (Sync) to IDE (UDMA mode 4)?

Learn how to convert data transfer rates between SCSI (Sync) and IDE (UDMA mode 4), two distinct legacy storage transfer protocols used in servers and PCs.

SCSI (Sync)

IDE (UDMA mode 4)

Please check your input. It must be a valid numeric value.

SCSI (Sync) to IDE (UDMA mode 4) Conversion Table

SCSI (Sync)	IDE (UDMA mode 4)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (Sync) to IDE (UDMA mode 4) Conversion Table
SCSI (Sync)	IDE (UDMA mode 4)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to transform data transfer rates from the SCSI (Sync) synchronous transfer mode into the IDE (UDMA mode 4) transfer mode. It is designed for compatibility and performance comparisons between legacy storage interfaces.

How to Use This Tool?

Enter the value of data transfer rate in SCSI (Sync) mode.
Select SCSI (Sync) as the source unit and IDE (UDMA mode 4) as the target unit.
Click the convert button to get the equivalent rate in IDE (UDMA mode 4).
Review the conversion results and apply them for benchmarking or comparison.

Key Features

Converts data transfer rates from SCSI (Sync) to IDE (UDMA mode 4) accurately.
Includes clear definitions and use cases of both transfer modes.
Provides example calculations for straightforward understanding.
Supports benchmarking and integration of legacy storage protocols.
Browser-based and easy to use without requiring installation.

Examples

1 SCSI (Sync) equals 0.0757575758 IDE (UDMA mode 4)
10 SCSI (Sync) equals 0.757575758 IDE (UDMA mode 4)

Common Use Cases

Comparing legacy SCSI synchronous transfer speeds with corresponding IDE Ultra DMA modes.
Integrating data transfer rates for compatibility checks in older storage hardware.
Benchmarking server and workstation storage performance based on distinct protocols.
Troubleshooting and configuring legacy embedded systems using IDE UDMA modes.
Supporting data recovery and maintenance of legacy storage devices.

Tips & Best Practices

Ensure you understand the hardware and interface differences before interpreting results.
Use the tool primarily for benchmarking and performance comparison rather than exact hardware replacement.
Consider cable and controller quality, as they affect real-world transfer rates outside protocol specifications.
Consult system documentation when working with legacy BIOS or firmware configurations.
Use the conversion to aid in legacy system troubleshooting and maintenance tasks.

Limitations

Conversion compares protocol throughput but does not reflect real-life performance impacted by hardware condition.
Physical incompatibility and differences in signaling standards limit direct hardware interchangeability.
Variations in cable quality and controller specifications can produce differing effective transfer rates.
This tool is intended for data transfer rate comparison, not for determining exact hardware compatibility.

Frequently Asked Questions

What does SCSI (Sync) mode mean?: SCSI (Sync) mode refers to a synchronous transfer method in the SCSI protocol where data transfer is coordinated with a clock signal, enabling higher data throughput and consistent timing.
What is IDE (UDMA mode 4)?: IDE (UDMA mode 4), or Ultra DMA/66, is a Parallel ATA transfer mode supporting a maximum theoretical throughput of about 66.7 MB/s, requiring an 80-conductor IDE cable.
Can I use this converter to directly connect SCSI and IDE devices?: No, this converter compares data transfer rates but does not address physical compatibility or signaling differences between SCSI and IDE standards.

Key Terminology

SCSI (Sync): A synchronous transfer mode of the SCSI protocol using a negotiated clock signal for higher throughput and deterministic timing.
IDE (UDMA mode 4): Also known as Ultra DMA/66, a Parallel ATA transfer mode delivering up to about 66.7 MB/s and requiring an 80-conductor IDE cable.
Data Transfer Rate: The speed at which data is transmitted from one device to another, often expressed in bytes per second.

Quick Knowledge Check

What does SCSI (Sync) mode use to transfer data?

Asynchronous signaling without synchronization

Synchronous transfer with negotiated clock

Wireless data transfer protocol

What is a key requirement for IDE (UDMA mode 4) to function reliably?

A 40-conductor IDE cable

An 80-conductor IDE cable

A fiber optic connection

What is the primary purpose of converting between SCSI (Sync) and IDE (UDMA mode 4)?

To physically connect SCSI and IDE drives

To compare and benchmark data transfer rates between legacy protocols

To upgrade modern devices to faster standards

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter