What Is This Tool?
This converter helps translate data transfer measurements from the T2 (signal) unit, a legacy telecom carrier rate, to SCSI (Sync), the synchronous transfer mode in storage communications. It supports users working with historical telecom data rates and modern storage interface speeds.
How to Use This Tool?
-
Enter the value in T2 (signal) units you wish to convert
-
Select the target unit as SCSI (Sync)
-
Start the conversion to view equivalent SCSI (Sync) data rate
-
Use the results for legacy network or storage system benchmarking
Key Features
-
Converts data transfer units from T2 (signal) to SCSI (Sync)
-
Provides conversion based on established nominal rates and negotiated parameters
-
Supports legacy telecom and storage interface data rate comparison
-
Easy to use browser-based tool with clear input and output units
Examples
-
1 T2 (signal) equals 0.1578 SCSI (Sync)
-
5 T2 (signal) converts to 0.789 SCSI (Sync)
-
Use simple multiplication of T2 values by 0.1578 to get the SCSI (Sync) equivalent
Common Use Cases
-
Analyzing medium-capacity leased lines between telephone central offices in legacy systems
-
Evaluating enterprise PBX trunk connections for private leased circuits
-
Comparing early telecom backbone links to storage interface speeds
-
Measuring high-throughput storage I/O performance in servers and workstations
-
Configuring RAID controllers and storage arrays requiring consistent transfer rates
-
Negotiating transfer speeds for legacy SCSI synchronous devices
Tips & Best Practices
-
Verify unit definitions to ensure correct context before converting
-
Remember the conversion relates two different protocols and is approximate
-
Use the tool for conceptual comparisons rather than direct physical throughput equivalence
-
Consider negotiated parameters when interpreting SCSI (Sync) rates
-
Utilize the conversion for legacy equipment integration or performance estimation
Limitations
-
T2 (signal) is a legacy standard with limited modern use
-
SCSI (Sync) transfer rates vary by device and negotiation parameters
-
Conversion is conceptual due to differing protocols and framing
-
Exact equivalence between T2 and SCSI data rates cannot be guaranteed
Frequently Asked Questions
-
What does T2 (signal) represent?
-
T2 (signal) is a legacy digital carrier rate in the North American T-carrier system transmitting at about 6.312 megabits per second, used historically for medium-capacity leased lines and trunking.
-
How does SCSI (Sync) transfer work?
-
SCSI (Sync) mode transfers data synchronously with a negotiated clock between initiator and target, allowing higher throughput and predictable timing.
-
Is the conversion between T2 and SCSI exact?
-
No, the conversion is approximate and conceptual due to differences in protocols and transfer mechanisms.
Key Terminology
-
T2 (signal)
-
A legacy North American digital carrier level transmitting at 6.312 Mbps used mainly for medium-capacity leased lines and trunking.
-
SCSI (Sync)
-
Synchronous transfer mode in the SCSI protocol where data transfers align with a negotiated clock for higher throughput and steady timing.
-
Data Transfer Rate
-
Measurement of the amount of data transmitted over a connection per unit time.