What is STS1 (payload) in telecommunications?

STS1 (payload) is the user-data capacity carried inside an STS-1 frame in SONET systems, offering a usable synchronous payload envelope capacity of 50.112 Mbps.

What does T2 (signal) represent?

T2 (signal) is a legacy digital carrier level in the North American T-carrier system with a nominal rate of 6.312 Mbps, historically used for medium-capacity leased lines and switch trunking.

Why convert from STS1 (payload) to T2 (signal)?

Conversion helps telecom carriers and engineers understand equivalent capacities when working with modern SONET systems alongside legacy T-carrier infrastructure for planning and integration.

How to Convert from STS1 (payload) to T2 (signal)?

Convert data transfer rates from STS1 (payload) to T2 (signal) with this easy-to-use online tool. Understand equivalent capacities and plan your telecommunications network efficiently.

STS1 (payload)

T2 (signal)

Please check your input. It must be a valid numeric value.

STS1 (payload) to T2 (signal) Conversion Table

STS1 (payload)	T2 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

STS1 (payload) to T2 (signal) Conversion Table
STS1 (payload)	T2 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter tool allows users to transform data transfer units from STS1 (payload), a SONET user-data capacity, to T2 (signal), a legacy North American digital carrier level. It enables comparison and planning between modern SONET systems and traditional T-carrier frameworks.

How to Use This Tool?

Enter the amount in STS1 (payload) you wish to convert.
Select STS1 (payload) as the source unit and T2 (signal) as the target unit.
Click the convert button to see the equivalent value in T2 (signal).
Use the result to assist in network capacity planning or legacy integration.

Key Features

Converts STS1 (payload) units to T2 (signal) values based on precise conversion rates.
Supports telecommunications capacity planning and infrastructure integration.
Browser-based and easy to use without requiring specialized software.
Provides examples illustrating typical conversions between these units.

Examples

1 STS1 (payload) equals 7.8422053232 T2 (signal).
5 STS1 (payload) equals 39.211026616 T2 (signal).

Common Use Cases

Provisioning OC-1/STS-1 circuits to carry DS3 or multiple DS1 channels.
Planning capacity and throughput for SONET and legacy T-carrier networks.
Mapping tributary signals like ATM or Ethernet into SONET payload envelopes.
Interfacing SONET systems with legacy T2 infrastructure for telecommunications.
Performing network traffic engineering involving diverse digital transmission standards.
Analyzing historical networks or planning migration from T2 circuits to SONET.

Tips & Best Practices

Understand the fixed nominal rates for both STS1 (payload) and T2 (signal) when using conversions.
Use this tool for data throughput comparisons, keeping in mind overhead differences may exist.
Apply conversions thoughtfully when integrating legacy systems with modern SONET technology.
Validate the converted values with network performance measurements where possible.

Limitations

T2 is a legacy signal largely phased out in current telecommunications networks.
Conversion is based on raw data throughput and excludes overhead or specific protocol encapsulation.
Differences in framing and signal overhead between STS1 and T2 may affect usable bandwidth beyond the conversion rate.

Frequently Asked Questions

What is STS1 (payload) in telecommunications?: STS1 (payload) is the user-data capacity carried inside an STS-1 frame in SONET systems, offering a usable synchronous payload envelope capacity of 50.112 Mbps.
What does T2 (signal) represent?: T2 (signal) is a legacy digital carrier level in the North American T-carrier system with a nominal rate of 6.312 Mbps, historically used for medium-capacity leased lines and switch trunking.
Why convert from STS1 (payload) to T2 (signal)?: Conversion helps telecom carriers and engineers understand equivalent capacities when working with modern SONET systems alongside legacy T-carrier infrastructure for planning and integration.

Key Terminology

STS1 (payload): User-data capacity inside an STS-1 SONET frame with a usable synchronous payload envelope capacity of 50.112 Mbps.
T2 (signal): A legacy North American T-carrier digital level transmitting at 6.312 Mbps, used historically for medium-capacity leased lines and trunking.
Synchronous Payload Envelope (SPE): The usable capacity within an STS-1 frame which carries user data in SONET systems.

Quick Knowledge Check

What does 1 STS1 (payload) convert to in T2 (signal)?

6.312 T2 signals

7.8422053232 T2 signals

50.112 T2 signals

What type of network is T2 (signal) primarily associated with?

Modern fiber optics

Legacy North American T-carrier

Wireless cellular

Which capacity is directly related to STS1 (payload)?

6.312 Mbps nominal rate

50.112 Mbps synchronous payload

39.211 Mbps legacy signal

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter