What is IDE (UDMA-66)?

IDE (UDMA-66) is a Parallel ATA transfer mode defining a theoretical maximum raw transfer rate of 66.7 megabytes per second, used in legacy PATA storage devices.

What does T2 (signal) represent?

T2 is a digital carrier level in the North American T-carrier system transmitting at about 6.312 megabits per second, used historically for medium-capacity leased telephone lines.

Why convert IDE (UDMA-66) to T2 (signal)?

This conversion helps translate legacy storage transfer capabilities into equivalent telecom carrier capacities for analyzing historic network performance or legacy system integration.

Are these units used in modern systems?

Both IDE (UDMA-66) and T2 (signal) are largely legacy technologies and have limited practical use in contemporary systems.

How to Convert from IDE (UDMA-66) to T2 (signal)?

Learn how to convert data transfer rates from IDE (UDMA-66), a legacy PATA storage mode, to T2 (signal), a historic telecommunications carrier level, using this unit converter tool. Understand use cases, examples, and limitations of this conversion.

IDE (UDMA-66)

T2 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA-66) to T2 (signal) Conversion Table

IDE (UDMA-66)	T2 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA-66) to T2 (signal) Conversion Table
IDE (UDMA-66)	T2 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows users to translate data transfer rates from IDE (UDMA-66), an older Parallel ATA transfer mode used in legacy storage devices, into T2 (signal), a historic digital carrier rate in North American telecommunications. It supports analyzing and comparing legacy hardware transfer capabilities with telecommunications line capacities.

How to Use This Tool?

Enter the value in IDE (UDMA-66) units you wish to convert
Select IDE (UDMA-66) as the source unit and T2 (signal) as the target unit
Click the convert button to view the result in T2 (signal)
Review the conversion output and utilize it for analysis or comparison

Key Features

Converts data transfer rates from IDE (UDMA-66) to T2 (signal)
Supports legacy unit comparison between storage and telecom technologies
Provides clear conversion examples for easy understanding
Browser-based tool requiring no installation
Useful for diagnostics and historical performance evaluation

Examples

1 IDE (UDMA-66) converts to approximately 83.65 T2 (signal)
2 IDE (UDMA-66) converts to approximately 167.30 T2 (signal)

Common Use Cases

Comparing storage device transfer rates with telecommunications carrier line capacities
Analyzing legacy computer hardware performance in conjunction with telephony systems
Planning and maintaining historic leased lines and network trunks
Verifying burst throughput capabilities of older PATA hard drives
Interpreting benchmarks on legacy IDE storage and telecom integrations

Tips & Best Practices

Understand that IDE (UDMA-66) rates are in megabytes per second, while T2 rates are in megabits per second
Use this conversion primarily when working with legacy or historic systems
Refer to device or network documentation to ensure the correct interpretation of conversion results
Consider encoding and signaling overhead when comparing throughput values
Employ this tool for educational or diagnostic purposes involving older technologies

Limitations

Measurement units differ: IDE (UDMA-66) uses raw data transfer rates in megabytes per second whereas T2 (signal) uses megabits per second
Conversion may not reflect exact real-world throughput due to encoding and signaling overheads
Both units represent legacy technologies with limited use in modern systems
Practical applicability is mostly restricted to historical analysis or specialized legacy maintenance

Frequently Asked Questions

What is IDE (UDMA-66)?: IDE (UDMA-66) is a Parallel ATA transfer mode defining a theoretical maximum raw transfer rate of 66.7 megabytes per second, used in legacy PATA storage devices.
What does T2 (signal) represent?: T2 is a digital carrier level in the North American T-carrier system transmitting at about 6.312 megabits per second, used historically for medium-capacity leased telephone lines.
Why convert IDE (UDMA-66) to T2 (signal)?: This conversion helps translate legacy storage transfer capabilities into equivalent telecom carrier capacities for analyzing historic network performance or legacy system integration.
Are these units used in modern systems?: Both IDE (UDMA-66) and T2 (signal) are largely legacy technologies and have limited practical use in contemporary systems.

Key Terminology

IDE (UDMA-66): A Parallel ATA transfer mode also known as Ultra DMA Mode 4 or ATA-66, specifying a maximum theoretical raw data transfer rate of 66.7 megabytes per second for legacy PATA devices.
T2 (signal): A legacy North American T-carrier digital line transmitting at approximately 6.312 megabits per second, used historically for medium-capacity leased telephone lines and trunking.
Burst Throughput: The maximum rate at which data can be transferred in short, rapid bursts, often used to specify peak performance in storage devices.

Quick Knowledge Check

What unit does IDE (UDMA-66) measure?

Megabits per second

Megabytes per second

Kilobytes per second

T2 (signal) was primarily used in which field?

Telecommunications

Computer storage devices

Broadcast television

Why is conversion between IDE (UDMA-66) and T2 (signal) useful?

To compare legacy storage data rates with telecom line capacities

To calculate modern internet speeds

To convert video streaming rates

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter