What does IDE (UDMA-66) represent?

IDE (UDMA-66), also known as Ultra DMA Mode 4 or ATA-66, is a Parallel ATA transfer mode defining the maximum theoretical burst data rate of 66.7 megabytes per second for legacy PATA storage devices.

What is STM-4 (signal) used for?

STM-4 (signal) is a Synchronous Transport Module level-4 in the SDH hierarchy with a nominal line rate of 622.08 Mbit/s, typically used in telecommunications for regional or inter-city optical backbone links.

Why convert IDE (UDMA-66) to STM-4 (signal)?

Converting helps compare and integrate legacy PATA device data rates with modern high-speed optical network capacities, assisting in network planning and compatibility verification.

How to Convert from IDE (UDMA-66) to STM-4 (signal)

Convert data transfer rates from IDE (UDMA-66), a legacy PATA burst mode, to STM-4 (signal), a modern optical transport standard, to understand compatibility and capacity between older hardware and current telecom networks.

IDE (UDMA-66)

STM-4 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA-66) to STM-4 (signal) Conversion Table

IDE (UDMA-66)	STM-4 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA-66) to STM-4 (signal) Conversion Table
IDE (UDMA-66)	STM-4 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool enables you to convert data transfer rates from IDE (UDMA-66), an older Parallel ATA burst transfer mode, to STM-4 (signal), a standardized optical transmission rate used in telecommunications. It helps compare legacy storage device throughput to modern synchronous optical network capacities.

How to Use This Tool?

Enter the value in IDE (UDMA-66) units that you want to convert.
Select STM-4 (signal) as the target unit for conversion.
Submit to view the equivalent STM-4 (signal) data transfer rate.

Key Features

Converts IDE (UDMA-66) burst transfer rates to STM-4 (signal) line rates.
Supports understanding of legacy PATA device compatibility with SDH transport standards.
Useful for IT legacy system maintenance and telecommunications network planning.
Browser-based and easy to use with clear input and output.

Examples

1 IDE (UDMA-66) equals 0.8487654321 STM-4 (signal).
10 IDE (UDMA-66) correspond to 8.487654321 STM-4 (signal).

Common Use Cases

Comparing throughput of legacy PATA hard drives with telecom optical network rates.
Planning network integration between older storage systems and modern SDH infrastructure.
Verifying maximum burst capability of IDE devices in relation to synchronous transport modules.

Tips & Best Practices

Use this tool for theoretical maximum rate comparisons rather than real-world throughput.
Understand that IDE (UDMA-66) represents burst transfer rates, not continuous data flow.
Apply conversion results primarily for capacity planning and compatibility assessments in mixed legacy and modern environments.

Limitations

IDE (UDMA-66) measures burst transfer rates of legacy hardware and not continuous throughput.
STM-4 (signal) is a synchronous line rate; direct practical equivalence is limited to comparison purposes.
Conversion is based on theoretical max values and does not account for protocol overhead or hardware performance variations.

Frequently Asked Questions

What does IDE (UDMA-66) represent?: IDE (UDMA-66), also known as Ultra DMA Mode 4 or ATA-66, is a Parallel ATA transfer mode defining the maximum theoretical burst data rate of 66.7 megabytes per second for legacy PATA storage devices.
What is STM-4 (signal) used for?: STM-4 (signal) is a Synchronous Transport Module level-4 in the SDH hierarchy with a nominal line rate of 622.08 Mbit/s, typically used in telecommunications for regional or inter-city optical backbone links.
Why convert IDE (UDMA-66) to STM-4 (signal)?: Converting helps compare and integrate legacy PATA device data rates with modern high-speed optical network capacities, assisting in network planning and compatibility verification.

Key Terminology

IDE (UDMA-66): A Parallel ATA transfer mode with a maximum theoretical burst data rate of 66.7 MB/s used for older PATA storage devices.
STM-4 (signal): A level-4 Synchronous Transport Module in SDH with a nominal line rate of 622.08 Mbit/s used for high-speed optical network transmission.
Burst Transfer Rate: The peak data transfer rate achievable in short durations, typically used in legacy hardware specifications like IDE (UDMA-66).
Synchronous Digital Hierarchy (SDH): A standardized digital telecommunications network protocol that carries multiple digital bit streams over optical fiber using lasers or LEDs.

Quick Knowledge Check

What type of data rate does IDE (UDMA-66) specify?

Continuous line rate

Maximum theoretical burst transfer rate

Synchronous optical transmission

STM-4 (signal) is part of which telecommunication standard?

Synchronous Optical Network (SONET)

Synchronous Digital Hierarchy (SDH)

Asynchronous Transfer Mode (ATM)

What is a common use for converting IDE (UDMA-66) to STM-4 (signal)?

Measuring continuous data streaming speed

Planning integration between legacy devices and modern SDH networks

Calculating device power consumption

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter