What Is This Tool?
This tool converts data transfer rates from IDE (UDMA-66), a legacy PATA transfer mode, to SCSI (Fast Ultra), a parallel SCSI signalling standard. It helps users compare transfer speeds between older ATA devices and higher throughput SCSI peripherals.
How to Use This Tool?
-
Enter the value in IDE (UDMA-66) units you want to convert.
-
Select IDE (UDMA-66) as the from-unit and SCSI (Fast Ultra) as the to-unit.
-
Click the convert button to see the equivalent SCSI (Fast Ultra) units.
-
Use the results to evaluate or compare data transfer performance.
Key Features
-
Converts IDE (UDMA-66) data transfer units to SCSI (Fast Ultra) units accurately.
-
Displays conversion based on theoretical maximum transfer rates.
-
Supports legacy hardware comparison for system compatibility and performance evaluation.
-
Browser-based and easy to use without installation.
Examples
-
1 IDE (UDMA-66) equals 3.3 SCSI (Fast Ultra).
-
2 IDE (UDMA-66) equals 6.6 SCSI (Fast Ultra).
Common Use Cases
-
Verifying maximum burst throughput of legacy PATA (IDE) hard drives.
-
Configuring or selecting transfer modes in BIOS for older systems.
-
Comparing transfer performance between IDE and SCSI devices in server setups.
-
Interpreting benchmarks and diagnosing transfer issues on legacy systems.
-
Managing tape backups and optical devices using SCSI interfacing.
Tips & Best Practices
-
Ensure both the device and controller support the specified transfer modes for accurate measurement.
-
Use the converter to assist with compatibility assessments when integrating legacy hardware.
-
Remember that actual transfer speeds may vary due to hardware and environmental factors.
-
Keep in mind the converter supports only legacy standards, useful mainly for maintenance or archival purposes.
Limitations
-
Conversion rates are theoretical maximums and do not guarantee actual sustained throughput.
-
Results may not account for hardware, cable quality, protocol overhead, or system bottlenecks.
-
Applies only to older legacy transfer technologies largely replaced by modern interfaces.
-
Practical use is mainly limited to specific repair, archival, or legacy system setups.
Frequently Asked Questions
-
What does IDE (UDMA-66) mean?
-
IDE (UDMA-66), also known as Ultra DMA Mode 4 or ATA-66, is a PATA transfer mode defining a maximum theoretical data rate of 66.7 megabytes per second.
-
What is SCSI (Fast Ultra)?
-
SCSI (Fast Ultra) is a parallel SCSI signalling mode that enhances device-to-host throughput while maintaining compatibility with the SCSI command set.
-
Why convert between IDE (UDMA-66) and SCSI (Fast Ultra)?
-
Conversion helps compare transfer speeds between legacy PATA devices and higher throughput SCSI peripherals for compatibility assessment and performance evaluation.
Key Terminology
-
IDE (UDMA-66)
-
A Parallel ATA mode also called Ultra DMA Mode 4 defining a maximum burst data rate of 66.7 MB/s for legacy PATA devices.
-
SCSI (Fast Ultra)
-
A parallel SCSI signalling mode combining Fast and Ultra extensions to increase throughput and reduce latency.
-
Data Transfer Rate
-
The speed at which data is transmitted from one device to another within a computer or network.