What does IDE (UDMA-66) represent?

IDE (UDMA-66) is a Parallel ATA transfer mode defining a maximum raw data rate of 66.7 megabytes per second, used for legacy PATA storage devices.

What is a Virtual Tributary 2 (signal)?

Virtual Tributary 2 is a SONET/SDH sub-rate signal format carrying a 2.048 Mbps payload, such as an E1 channel, within higher-rate telecom frames.

Why convert between IDE (UDMA-66) and Virtual Tributary 2?

This conversion helps align data transfer specs of legacy storage with telecom signals for integration, capacity planning, and configuring multiplexing in networks.

How to Convert from IDE (UDMA-66) to Virtual Tributary 2 (signal)

Convert data transfer rates between legacy IDE (UDMA-66) storage speeds and Virtual Tributary 2 signals used in SONET/SDH telecom frameworks. Understand definitions, use cases, and conversion process.

IDE (UDMA-66)

Virtual Tributary 2 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA-66) to Virtual Tributary 2 (signal) Conversion Table

IDE (UDMA-66)	Virtual Tributary 2 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA-66) to Virtual Tributary 2 (signal) Conversion Table
IDE (UDMA-66)	Virtual Tributary 2 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool converts data transfer measurements from IDE (UDMA-66), a legacy PATA hard drive transfer mode, into Virtual Tributary 2 (VT2) signals used in SONET/SDH telecommunications, enabling compatibility bridging between storage device speeds and telecom signal rates.

How to Use This Tool?

Enter the value in IDE (UDMA-66) representing the data transfer rate
Select the target unit Virtual Tributary 2 (signal) for conversion
Submit or calculate to view the equivalent number of VT2 signals
Use the result for capacity planning or compatibility checks between storage devices and telecom infrastructure

Key Features

Converts maximum theoretical raw data rates from IDE (UDMA-66) to Virtual Tributary 2 signals
Supports integration of legacy PATA storage transfer capabilities with SONET/SDH telecom standards
Browser-based and simple to use with clear input and output units
Provides example conversions to clarify results

Examples

1 IDE (UDMA-66) equals approximately 229.17 Virtual Tributary 2 (signal)
2 IDE (UDMA-66) equals approximately 458.33 Virtual Tributary 2 (signal)

Common Use Cases

Specifying or verifying burst transfer speeds of legacy PATA (IDE) hard and optical drives
Aligning IDE storage throughput rates with SONET/SDH telecom network signals for integration
Configuring SONET multiplexers or digital cross-connects to groom E1/PDH channels
Planning capacity and provisioning in telecom networks that interwork with computer storage data rates

Tips & Best Practices

Understand that the conversion reflects theoretical maximum burst transfer rates rather than sustained throughput
Use the conversion results as a reference for telecom network planning rather than precise real-world data transfer figures
Consider overhead and protocol differences when applying conversions in practical scenarios
Leverage this tool to bridge terminology and unit differences between storage and telecommunications fields

Limitations

Conversion is based on theoretical maximum raw transfer rates, excluding protocol overhead and losses
IDE (UDMA-66) transfer rates represent burst capabilities, not continuous throughput
Virtual Tributary 2 capacities reflect telecom framing structures and may not correspond directly to file transfer speeds on IDE devices

Frequently Asked Questions

What does IDE (UDMA-66) represent?: IDE (UDMA-66) is a Parallel ATA transfer mode defining a maximum raw data rate of 66.7 megabytes per second, used for legacy PATA storage devices.
What is a Virtual Tributary 2 (signal)?: Virtual Tributary 2 is a SONET/SDH sub-rate signal format carrying a 2.048 Mbps payload, such as an E1 channel, within higher-rate telecom frames.
Why convert between IDE (UDMA-66) and Virtual Tributary 2?: This conversion helps align data transfer specs of legacy storage with telecom signals for integration, capacity planning, and configuring multiplexing in networks.

Key Terminology

IDE (UDMA-66): A Parallel ATA transfer mode with a raw data rate up to 66.7 MB/s used for legacy PATA storage devices.
Virtual Tributary 2 (signal): A SONET/SDH sub-rate signal format carrying a 2.048 Mbps payload such as an E1 channel within higher-level telecom frames.
SONET/SDH: Telecommunication protocols providing multiplexing for digital signals over fiber optic networks.
E1 Channel: A digital transmission format carrying 2.048 Mbps used primarily in European telecommunications.

Quick Knowledge Check

What is the maximum theoretical data rate of IDE (UDMA-66)?

33.3 megabytes per second

66.7 megabytes per second

100 megabytes per second

Virtual Tributary 2 carries which data rate inside SONET/SDH frames?

10 Mbps

2.048 Mbps

1 Gbps

What does converting IDE (UDMA-66) to Virtual Tributary 2 help with?

Improving file transfer speeds on hard drives

Aligning legacy storage speeds with telecommunications network planning

Increasing hard drive storage capacity

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter