What Is This Tool?
This converter helps translate data transfer rates from the IDE (UDMA-66) standard to the SCSI (Sync) mode. It allows users to compare and understand transfer speeds between older PATA (IDE) storage devices and synchronous SCSI devices, assisting in system diagnostics and hardware management.
How to Use This Tool?
-
Enter the value in IDE (UDMA-66) units you wish to convert
-
Select IDE (UDMA-66) as the source unit and SCSI (Sync) as the target unit
-
Press convert to see the equivalent SCSI (Sync) value
-
Use the results for performance tuning or device compatibility checks
Key Features
-
Converts data transfer rates from IDE (UDMA-66) to SCSI (Sync)
-
Supports legacy PATA and SCSI device comparisons
-
Provides quick conversion using a fixed formula
-
Browser-based and easy to use
Examples
-
1 IDE (UDMA-66) equals 13.2 SCSI (Sync)
-
5 IDE (UDMA-66) converts to 66 SCSI (Sync)
Common Use Cases
-
Aligning transfer speeds between legacy PATA and SCSI storage devices
-
Configuring and troubleshooting storage drives in BIOS or older systems
-
Performing storage device benchmark comparisons involving IDE and SCSI
-
Supporting data center storage setups with legacy hardware
-
Diagnosing transfer performance on older IDE and SCSI drives
Tips & Best Practices
-
Verify device and system compatibility before interpreting conversion results
-
Use the converter alongside hardware troubleshooting and benchmarking tools
-
Consider negotiated parameters for SCSI modes to understand effective throughput
-
Keep in mind legacy limitations when configuring transfer modes in BIOS
Limitations
-
Maximum theoretical transfer rates might differ from actual sustained speeds
-
Conversions apply only to legacy IDE and SCSI interfaces, not modern SATA or SAS
-
Real-world throughput can vary due to cable quality, hardware overhead, and device specifics
Frequently Asked Questions
-
What does IDE (UDMA-66) represent?
-
IDE (UDMA-66) is a transfer mode for legacy PATA drives specifying a maximum raw data rate of 66.7 megabytes per second using an 80-conductor cable.
-
What is SCSI (Sync) mode?
-
SCSI (Sync) is a synchronous transfer mode where data is transferred in sync with a negotiated clock between devices, ensuring higher throughput and consistent timing.
-
Why convert IDE (UDMA-66) to SCSI (Sync)?
-
Conversion is useful for comparing transfer speeds between different legacy storage protocols during diagnostics, performance tuning, or compatibility assessments.
Key Terminology
-
IDE (UDMA-66)
-
A legacy Parallel ATA data transfer mode with a maximum raw data rate of 66.7 MB/s using an 80-conductor PATA cable.
-
SCSI (Sync)
-
A synchronous transfer mode in the SCSI protocol where data transfer is synchronized with a negotiated clock for higher throughput.
-
Data Transfer Rate
-
The speed at which data is moved from one device to another, typically measured in bytes or megabytes per second.