What does IDE (UDMA-66) represent?

IDE (UDMA-66), also known as Ultra DMA Mode 4 or ATA-66, is a Parallel ATA transfer mode signifying a theoretical maximum data rate of 66.7 megabytes per second for legacy PATA storage devices.

What is OC3 used for?

OC3 is a SONET optical transmission standard with a data rate of 155.52 megabits per second, typically used for backbone links in telecommunications networks and aggregating multiple lower-rate channels.

Why convert from IDE (UDMA-66) to OC3?

Converting helps relate the data transfer speeds of older PATA devices to modern optical network rates, aiding in network planning and performance comparison across different technology generations.

How to Convert from IDE (UDMA-66) to OC3

Learn how to convert data transfer rates from IDE (UDMA-66), a legacy PATA storage device transfer mode, to OC3, a modern SONET optical transmission rate. Understand the conversion formula, use cases, and limitations for effective network planning and performance comparison.

IDE (UDMA-66)

OC3

Please check your input. It must be a valid numeric value.

IDE (UDMA-66) to OC3 Conversion Table

IDE (UDMA-66)	OC3

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA-66) to OC3 Conversion Table
IDE (UDMA-66)	OC3

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to translate data transfer rates from IDE (UDMA-66), an older Parallel ATA transfer mode used in legacy storage devices, to OC3, a contemporary SONET optical transmission rate commonly used in telecommunications. It helps relate legacy device speeds to modern network transmission rates.

How to Use This Tool?

Enter the value in IDE (UDMA-66) units you want to convert.
Select IDE (UDMA-66) as the source unit and OC3 as the target unit.
Click convert to view the equivalent data transfer rate in OC3.

Key Features

Converts IDE (UDMA-66) burst transfer rates to OC3 optical transmission rates.
Provides a simple, browser-based interface for quick conversions.
Supports data transfer measurement comparisons across legacy and modern technologies.

Examples

1 IDE (UDMA-66) equals approximately 3.395 OC3.
2 IDE (UDMA-66) converts to about 6.79 OC3.

Common Use Cases

Comparing legacy PATA device transfer speeds with modern optical network rates.
Planning and designing telecommunications networks involving mixed legacy and current technologies.
Evaluating performance and compatibility between storage interfaces and telecom infrastructure.

Tips & Best Practices

Consider the difference between bytes per second and bits per second when interpreting conversions.
Use this tool primarily for high-level planning and comparison rather than precise performance analysis.
Account for real-world factors like cable quality and device compatibility that may affect actual speeds.

Limitations

The conversion compares burst rates in megabytes per second with transmission rates in megabits per second, which involve different unit bases.
Protocol overhead and technology differences mean this conversion may not reflect exact real-world throughput.
Performance can be influenced by factors such as cable conditions, device support, and network protocols.

Frequently Asked Questions

What does IDE (UDMA-66) represent?: IDE (UDMA-66), also known as Ultra DMA Mode 4 or ATA-66, is a Parallel ATA transfer mode signifying a theoretical maximum data rate of 66.7 megabytes per second for legacy PATA storage devices.
What is OC3 used for?: OC3 is a SONET optical transmission standard with a data rate of 155.52 megabits per second, typically used for backbone links in telecommunications networks and aggregating multiple lower-rate channels.
Why convert from IDE (UDMA-66) to OC3?: Converting helps relate the data transfer speeds of older PATA devices to modern optical network rates, aiding in network planning and performance comparison across different technology generations.

Key Terminology

IDE (UDMA-66): A Parallel ATA transfer mode also called Ultra DMA Mode 4 or ATA-66, specifying a maximum theoretical burst data transfer of 66.7 megabytes per second for legacy PATA devices.
OC3: An Optical Carrier level 3 transmission rate used in SONET networks at 155.52 megabits per second for carrying aggregated channels over fiber.
Burst Throughput: The maximum short-term data transfer capability of a storage device during data bursts.

Quick Knowledge Check

What is the maximum theoretical data rate of IDE (UDMA-66)?

155.52 megabits per second

66.7 megabytes per second

100 megabytes per second

OC3 is primarily used in which kind of network?

Home Wi-Fi networks

Synchronous optical networking (SONET)

Bluetooth connections

What is a key consideration when converting IDE (UDMA-66) rates to OC3?

Differences between bytes and bits units

Color of the cables used

Number of connected devices

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter