What Is This Tool?
This converter translates data transfer values from T2 (signal), a legacy medium-capacity digital carrier used in North American telecommunication systems, into ISDN (single channel) units, which represent 64 kbit/s bearer channels in Integrated Services Digital Network infrastructures.
How to Use This Tool?
-
Enter the value in T2 (signal) units you want to convert
-
Select T2 (signal) as the source unit and ISDN (single channel) as the target unit
-
Perform the conversion to see the equivalent number of ISDN (single channel) units
Key Features
-
Converts T2 (signal) data rates to equivalent ISDN (single channel) units
-
Uses a fixed conversion rate reflecting nominal channel capacities
-
Supports understanding and comparing legacy telecom trunk line capacities
-
Browser-based and simple for quick telecommunications data conversions
Examples
-
1 T2 (signal) equals 98.625 ISDN (single channel)
-
5 T2 (signal) corresponds to 493.125 ISDN (single channel)
Common Use Cases
-
Analyzing legacy medium-capacity trunk lines in terms of ISDN channels
-
Upgrading or provisioning telecommunications infrastructure with legacy equipment
-
Documenting historical telecom systems and enterprise PBX trunk connections
Tips & Best Practices
-
Use this conversion to compare legacy T2 signals with ISDN channel capacities accurately
-
Remember this tool applies primarily to historical telecommunications systems
-
Consult current network specifications when dealing with modern broadband or digital carriers
Limitations
-
Applicable only to legacy telecommunications systems using T2 signaling
-
Conversion rate reflects nominal capacities and may not represent actual bandwidth including overhead
-
ISDN single channels operate at 64 kbit/s, far lower than modern broadband speeds
Frequently Asked Questions
-
What does a T2 (signal) represent in telecommunications?
-
T2 (signal) is a legacy digital carrier level in the North American T-carrier system that transmits data at about 6.312 Mbps by multiplexing multiple PCM channels into one trunk.
-
What is an ISDN (single channel)?
-
An ISDN (single channel) refers to one bearer channel in ISDN networks with a data capacity of 64 kbit/s, commonly used for voice or user data.
-
Why convert T2 (signal) to ISDN (single channel)?
-
Converting helps understand and compare legacy medium-capacity trunk lines to standard ISDN B-channel equivalents when provisioning or analyzing telecom equipment.
Key Terminology
-
T2 (signal)
-
A legacy digital carrier level transmitting at 6.312 Mbps used in North American telecommunications for medium-capacity leased lines and trunking.
-
ISDN (single channel)
-
A single ISDN B-channel with a data rate of 64 kbit/s used for carrying voice or data in Integrated Services Digital Network systems.
-
Conversion Rate
-
The fixed nominal ratio indicating that 1 T2 (signal) equals 98.625 ISDN (single channel) units.