What does IDE (UDMA mode 4) mean?

IDE (UDMA mode 4), also known as Ultra DMA/66 (ATA-4), is a Parallel ATA transfer mode providing a theoretical max speed of about 66.7 MB/s using an 80-conductor IDE cable.

How is kilobyte per second (SI def.) different from kibibyte per second?

Kilobyte per second (SI def.) equals 1000 bytes per second, while kibibyte per second is based on 1024 bytes per second, representing distinct measurement systems.

Why convert IDE (UDMA mode 4) to kilobyte/second (SI def.)?

Converting aids in expressing legacy device speeds in a standard, widely recognized metric unit for easier comparison, reporting, and benchmarking.

Convert IDE (UDMA mode 4) to Kilobyte/second (SI def.) Easily

Learn how to convert data transfer rates from IDE (UDMA mode 4) to kilobyte per second (SI definition) using a straightforward online unit converter tool designed for legacy and modern data rate metrics.

IDE (UDMA mode 4)

Kilobyte/second (SI def.)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 4) to Kilobyte/second (SI def.) Conversion Table

IDE (UDMA mode 4)	Kilobyte/second (SI def.)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 4) to Kilobyte/second (SI def.) Conversion Table
IDE (UDMA mode 4)	Kilobyte/second (SI def.)

Explore More Data Transfer Units Converter

What Is This Tool?

This unit converter transforms data transfer rates measured in IDE (UDMA mode 4), a legacy Parallel ATA transfer mode, into kilobyte per second using the SI decimal definition. It simplifies understanding and comparing older hardware speeds with modern data transfer units.

How to Use This Tool?

Enter the value in IDE (UDMA mode 4) units you want to convert.
Select IDE (UDMA mode 4) as the source unit if not preselected.
Choose kilobyte per second (SI def.) as the target unit.
Click the convert button to get the equivalent data rate in kilobytes per second (SI).
Review the converted value to compare or report transfer speeds in standard SI units.

Key Features

Converts IDE (UDMA mode 4) data transfer rates into kilobyte per second (SI definition).
Supports legacy IDE/ATA standard transfer mode conversions.
Provides clear distinctions between decimal-based and binary-based data rate units.
Helps in benchmarking and analyzing legacy PC hardware speeds.
Browser-based and easy to use with no installation required.

Examples

1 IDE (UDMA mode 4) equals 66000 kilobyte/second (SI def.)
0.5 IDE (UDMA mode 4) converts to 33000 kilobyte/second (SI def.)

Common Use Cases

Converting legacy IDE/ATA interface speeds to commonly used metric data transfer units.
Comparing older drive transfer rates with modern file transfer speeds.
Reporting throughput for embedded devices or sensors using SI bytes per second.
Configuring or troubleshooting data transfer modes in BIOS or firmware for legacy systems.
Benchmarking and maintaining older IDE/ATA storage hardware.

Tips & Best Practices

Ensure the value entered corresponds to transfer rates, not storage size.
Note that IDE (UDMA mode 4) speeds represent theoretical maximums; actual speeds may be lower.
Keep in mind the difference between SI kilobytes and binary kibibytes when interpreting results.
Use the converter for performance analysis and compatibility checks in legacy hardware environments.

Limitations

The IDE (UDMA mode 4) transfer rate is a theoretical maximum and may not match real-world performance.
Kilobyte per second (SI def.) uses decimal units which differ from binary-based units, potentially causing confusion.
The conversion applies only to data transfer speeds and does not indicate storage capacity or latency.

Frequently Asked Questions

What does IDE (UDMA mode 4) mean?: IDE (UDMA mode 4), also known as Ultra DMA/66 (ATA-4), is a Parallel ATA transfer mode providing a theoretical max speed of about 66.7 MB/s using an 80-conductor IDE cable.
How is kilobyte per second (SI def.) different from kibibyte per second?: Kilobyte per second (SI def.) equals 1000 bytes per second, while kibibyte per second is based on 1024 bytes per second, representing distinct measurement systems.
Why convert IDE (UDMA mode 4) to kilobyte/second (SI def.)?: Converting aids in expressing legacy device speeds in a standard, widely recognized metric unit for easier comparison, reporting, and benchmarking.

Key Terminology

IDE (UDMA mode 4): A Parallel ATA transfer mode known as Ultra DMA/66 (ATA-4), enabling data transfer at about 66.7 MB/s using an 80-conductor IDE cable.
Kilobyte/second (SI def.): A data transfer rate equal to 1000 bytes per second, representing the decimal definition used in standard metric data measurements.
Ultra DMA protocol: A protocol for moving blocks of data between a drive and host quickly and efficiently within the IDE/ATA standard.

Quick Knowledge Check

What is the approximate data rate of IDE (UDMA mode 4)?

66000 kilobyte/second (SI def.)

1000 kilobyte/second

1024 kilobyte/second

Which unit uses decimal-based measurement?

Kilobyte per second (SI def.)

Kibibyte per second (KiB/s)

Megabyte per second (binary)

What is a common use of converting IDE (UDMA mode 4) to kilobyte/second (SI def.)?

Benchmarking legacy storage speeds

Calculating storage capacity

Measuring device latency

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter