What does SCSI (Fast Wide) represent?

It is a SCSI-2 interface mode combining 10 MHz Fast timing with a 16-bit wide data bus, enabling a theoretical max throughput of 20 MB/s on a 16-bit single-ended implementation.

What is Virtual Tributary 2 (VT2)?

VT2 is a SONET/SDH sub-rate signal format that carries a 2.048 Mbps payload (E1 channel) inside higher-rate SONET/SDH frames for multiplexing lower-rate PDH circuits.

Why convert from SCSI (Fast Wide) to VT2?

This conversion helps relate legacy high-throughput storage data rates to telecom sub-rate signals, supporting network integration and multiplexing within SONET/SDH systems.

How to Convert from SCSI (Fast Wide) to Virtual Tributary 2 (signal)?

Convert data transfer units from the SCSI (Fast Wide) interface mode to Virtual Tributary 2 (VT2) signal format with ease. Learn about definitions, use cases, and conversion formulas relevant to telecommunications and legacy data storage systems.

SCSI (Fast Wide)

Virtual Tributary 2 (signal)

Please check your input. It must be a valid numeric value.

SCSI (Fast Wide) to Virtual Tributary 2 (signal) Conversion Table

SCSI (Fast Wide)	Virtual Tributary 2 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (Fast Wide) to Virtual Tributary 2 (signal) Conversion Table
SCSI (Fast Wide)	Virtual Tributary 2 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter transforms data transfer measurements from the SCSI (Fast Wide) interface standard to the Virtual Tributary 2 (VT2) signal format used in telecommunications. It helps users relate legacy high-throughput disk and peripheral data rates to sub-rate telecom channel units.

How to Use This Tool?

Enter the data transfer value measured in SCSI (Fast Wide) units
Select SCSI (Fast Wide) as the source unit
Choose Virtual Tributary 2 (signal) as the target unit
Click convert to see the equivalent number of VT2 signals
Review examples and related use cases for deeper context

Key Features

Converts data transfer rates between SCSI (Fast Wide) and Virtual Tributary 2 signals
Includes definitions and use cases for both units to aid understanding
Provides example conversions for practical reference
Supports integration of legacy storage data rates with SONET/SDH telecom signals
Browser-based and easy to use without installation

Examples

1 SCSI (Fast Wide) equals approximately 69.44 VT2 signals
5 SCSI (Fast Wide) corresponds to roughly 347.22 VT2 signals

Common Use Cases

Translating legacy disk and peripheral throughput to telecom sub-rate channels
Planning capacity in telecom networks integrating E1 or PDH services
Configuring SONET multiplexers or digital cross-connects for lower-rate circuits
Understanding data flow when combining storage systems with SONET/SDH equipment

Tips & Best Practices

Consider hardware implementation effects on actual throughput when interpreting results
Use the conversion as a guide for telecom network provisioning and capacity planning
Refer to overhead and framing details for accurate practical throughput mapping
Use examples to verify conversion accuracy before applying to large-scale systems

Limitations

SCSI (Fast Wide) throughput can vary based on hardware factors and bus configurations
VT2 signals have fixed payload rates which may exclude overhead and framing details
Practical conversions may need additional consideration of signal encapsulation and transport effects

Frequently Asked Questions

What does SCSI (Fast Wide) represent?: It is a SCSI-2 interface mode combining 10 MHz Fast timing with a 16-bit wide data bus, enabling a theoretical max throughput of 20 MB/s on a 16-bit single-ended implementation.
What is Virtual Tributary 2 (VT2)?: VT2 is a SONET/SDH sub-rate signal format that carries a 2.048 Mbps payload (E1 channel) inside higher-rate SONET/SDH frames for multiplexing lower-rate PDH circuits.
Why convert from SCSI (Fast Wide) to VT2?: This conversion helps relate legacy high-throughput storage data rates to telecom sub-rate signals, supporting network integration and multiplexing within SONET/SDH systems.

Key Terminology

SCSI (Fast Wide): A SCSI-2 interface combining Fast timing at 10 MHz with a 16-bit data bus for higher throughput in legacy storage systems.
Virtual Tributary 2 (VT2): A SONET/SDH sub-rate signal carrying a 2.048 Mbps payload used to multiplex lower-rate PDH circuits into higher-rate transport frames.
Throughput: The rate at which data is successfully transferred over a communication channel or interface.

Quick Knowledge Check

What is the theoretical max throughput of SCSI (Fast Wide)?

10 MB/s

20 MB/s

40 MB/s

What data rate does a Virtual Tributary 2 signal carry?

1.544 Mbps

2.048 Mbps

10 Mbps

Which technology typically uses Virtual Tributary 2 signals?

Ethernet

SONET/SDH

Fiber Channel

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter