What does IDE (UDMA mode 1) represent?

IDE (UDMA mode 1) is an Ultra DMA transfer mode for Parallel ATA interfaces, providing a theoretical maximum raw transfer rate of about 25 MB/s used in older PATA devices.

What is SCSI (Fast Wide)?

SCSI (Fast Wide) is a SCSI-2 interface mode combining Fast timing and a 16-bit wide data bus, yielding a theoretical maximum throughput of 20 MB/s in 16-bit single-ended implementations.

Why convert from IDE (UDMA mode 1) to SCSI (Fast Wide)?

Converting helps compare and anticipate relative data transfer rates and compatibility between older Parallel ATA and SCSI storage devices during system integration or benchmarking.

Does the conversion reflect real-world transfer speeds?

No, it reflects theoretical maximum transfer rates and actual speeds vary depending on hardware and implementation details.

Can I directly replace IDE with SCSI based on this conversion?

No, hardware differences require appropriate controllers or adapters to ensure compatibility.

How to Convert from IDE (UDMA mode 1) to SCSI (Fast Wide)?

Convert data transfer rates between IDE (UDMA mode 1) and SCSI (Fast Wide) interfaces using our unit converter tool, designed for legacy storage technology comparisons and benchmarking.

IDE (UDMA mode 1)

SCSI (Fast Wide)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 1) to SCSI (Fast Wide) Conversion Table

IDE (UDMA mode 1)	SCSI (Fast Wide)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 1) to SCSI (Fast Wide) Conversion Table
IDE (UDMA mode 1)	SCSI (Fast Wide)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool converts data transfer units from IDE (UDMA mode 1) to SCSI (Fast Wide), enabling users to compare theoretical transfer rates of vintage Parallel ATA and SCSI storage interfaces for better understanding and benchmarking.

How to Use This Tool?

Enter the amount of IDE (UDMA mode 1) data transfer units you want to convert.
Choose IDE (UDMA mode 1) as the source unit and SCSI (Fast Wide) as the target unit.
Click the convert button to see the equivalent SCSI (Fast Wide) data transfer value.
Review the result which reflects theoretical transfer rate relationships.

Key Features

Converts data transfer units between IDE (UDMA mode 1) and SCSI (Fast Wide).
Based on theoretical maximum transfer rates from ATA/ATAPI and SCSI-2 standards.
Supports legacy storage interface comparisons for vintage computing and hardware maintenance.
Includes straightforward input and output for quick conversions.
Browser-based and easy to access without additional software.

Examples

Converting 2 IDE (UDMA mode 1) units gives 2.5 SCSI (Fast Wide) units.
Converting 4 IDE (UDMA mode 1) units results in 5 SCSI (Fast Wide) units.

Common Use Cases

Specifying or troubleshooting BIOS and drive transfer modes on vintage PCs using UDMA settings.
Benchmarking and reporting data transfer rates of older IDE and PATA hard disks or optical drives.
Connecting disk drives and RAID controllers in legacy servers to assess throughput improvements.
Integrating external storage or SCSI peripherals in legacy environments requiring enhanced transfer rates.
Diagnosing cable or controller compatibility issues between PATA and SCSI devices.

Tips & Best Practices

Verify device compatibility before applying conversions to hardware configurations.
Use conversion results as guidelines rather than exact real-world transfer rates.
Consider physical factors like cable quality and implementation specifics that influence actual throughput.
Utilize this tool for estimating and comparing legacy hardware performance during maintenance or restoration.
Cross-check conversions with system documentation or manufacturer specs for accuracy.

Limitations

Actual data throughput may vary due to device negotiation and cable quality.
The conversion is based on theoretical maximum rates and doesn’t guarantee real-world sustained speeds.
Direct hardware substitution may require controllers or adapters due to protocol differences.
Differences between single-ended and differential implementations affect achievable performance.
Conversion results are intended for comparative assessment only, not precise measurement.

Frequently Asked Questions

What does IDE (UDMA mode 1) represent?: IDE (UDMA mode 1) is an Ultra DMA transfer mode for Parallel ATA interfaces, providing a theoretical maximum raw transfer rate of about 25 MB/s used in older PATA devices.
What is SCSI (Fast Wide)?: SCSI (Fast Wide) is a SCSI-2 interface mode combining Fast timing and a 16-bit wide data bus, yielding a theoretical maximum throughput of 20 MB/s in 16-bit single-ended implementations.
Why convert from IDE (UDMA mode 1) to SCSI (Fast Wide)?: Converting helps compare and anticipate relative data transfer rates and compatibility between older Parallel ATA and SCSI storage devices during system integration or benchmarking.
Does the conversion reflect real-world transfer speeds?: No, it reflects theoretical maximum transfer rates and actual speeds vary depending on hardware and implementation details.
Can I directly replace IDE with SCSI based on this conversion?: No, hardware differences require appropriate controllers or adapters to ensure compatibility.

Key Terminology

IDE (UDMA mode 1): An Ultra DMA transfer mode for Parallel ATA interfaces with a theoretical maximum transfer rate of about 25 MB/s used in older PATA devices.
SCSI (Fast Wide): A SCSI-2 interface mode combining Fast timing and a 16-bit wide bus, offering up to 20 MB/s theoretical transfer rate in single-ended implementations.
Data Transfer Rate: The speed at which data is transferred from one device or system to another, usually measured in megabytes per second (MB/s).

Quick Knowledge Check

What is the theoretical maximum transfer rate for IDE (UDMA mode 1)?

About 50 MB/s

About 25 MB/s

About 10 MB/s

Which protocol uses a 16-bit wide data bus to increase transfer rates?

IDE (UDMA mode 1)

SCSI (Fast Wide)

USB 2.0

What is a key use of converting IDE (UDMA mode 1) to SCSI (Fast Wide)?

To measure cable length exactly

To compare theoretical data transfer rates and compatibility

To convert file formats

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter