What does IDE (UDMA mode 1) mean?

IDE (UDMA mode 1) is an Ultra DMA transfer mode for older Parallel ATA devices with a max theoretical speed around 25 MB/s, used mainly for timing and error-checking.

How does SCSI (Async) transfer data?

SCSI (Async) transmits data using request and acknowledge handshakes without a shared clock, so throughput depends on device response and bus arbitration.

Why convert IDE (UDMA mode 1) to SCSI (Async)?

Conversion helps compare or benchmark data rates between older PATA and SCSI devices, supporting troubleshooting and performance evaluation in legacy systems.

How to Convert from IDE (UDMA mode 1) to SCSI (Async)

Convert data transfer units between IDE (UDMA mode 1) and SCSI (Async) modes to assess and benchmark legacy device performance in vintage computing environments.

IDE (UDMA mode 1)

SCSI (Async)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 1) to SCSI (Async) Conversion Table

IDE (UDMA mode 1)	SCSI (Async)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 1) to SCSI (Async) Conversion Table
IDE (UDMA mode 1)	SCSI (Async)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter transforms data transfer rates from IDE (UDMA mode 1), a Parallel ATA legacy transfer mode, to SCSI (Async), the asynchronous transfer mode used in SCSI devices. It aids in comparing and benchmarking transfer rates of older storage devices under these protocols.

How to Use This Tool?

Enter the data transfer value in IDE (UDMA mode 1) units.
Select the target unit as SCSI (Async).
Click convert to view the equivalent transfer rate in SCSI (Async).
Use the result to compare or benchmark legacy storage device performance.

Key Features

Converts IDE (UDMA mode 1) transfer rates to SCSI (Async) units using defined theoretical rates.
Supports benchmarking for vintage PATA and SCSI device performance.
Facilitates troubleshooting of BIOS, controller, and compatibility issues in legacy hardware.
Browser-based and user-friendly interface for quick conversions.

Examples

1 IDE (UDMA mode 1) is equivalent to 16.6666666667 SCSI (Async).
2 IDE (UDMA mode 1) converts to 33.3333333334 SCSI (Async).

Common Use Cases

Diagnosing or setting BIOS and drive transfer modes on vintage PATA equipment.
Benchmarking throughput of older IDE hard disks and optical drives.
Troubleshooting cable or controller errors caused by inappropriate UDMA configurations.
Assessing SCSI bus timing and compatibility in asynchronous mode for legacy devices.
Configuring and testing retrocomputing systems using asynchronous SCSI connections.

Tips & Best Practices

Verify device compatibility when selecting transfer modes in legacy hardware.
Use the tool to compare theoretical maximum transfer rates for benchmarking purposes.
Consider troubleshooting controllers and cables if data errors occur during transfers.
Remember that asynchronous SCSI performance varies based on device response and bus arbitration.
Employ this conversion mainly for vintage computing maintenance and archival hardware assessments.

Limitations

The conversion reflects theoretical maximum transfer rates and does not capture real-world performance.
It excludes delays caused by device response times and bus arbitration overhead in SCSI asynchronous transfers.
Physical cable quality and error conditions in vintage hardware can affect actual transfer speeds.

Frequently Asked Questions

What does IDE (UDMA mode 1) mean?: IDE (UDMA mode 1) is an Ultra DMA transfer mode for older Parallel ATA devices with a max theoretical speed around 25 MB/s, used mainly for timing and error-checking.
How does SCSI (Async) transfer data?: SCSI (Async) transmits data using request and acknowledge handshakes without a shared clock, so throughput depends on device response and bus arbitration.
Why convert IDE (UDMA mode 1) to SCSI (Async)?: Conversion helps compare or benchmark data rates between older PATA and SCSI devices, supporting troubleshooting and performance evaluation in legacy systems.

Key Terminology

IDE (UDMA mode 1): A legacy Ultra DMA transfer mode for Parallel ATA devices with a theoretical max raw transfer rate of ~25 MB/s used in older PATA hardware.
SCSI (Async): An asynchronous data-transfer mode in SCSI protocol where data is transferred via request and acknowledge handshakes rather than a shared clock.
Data transfer rate conversion: The process of translating data rates from one unit or protocol measure to another to compare performance or compatibility.

Quick Knowledge Check

What is the theoretical maximum base transfer rate of IDE (UDMA mode 1)?

About 25 MB/s

About 50 MB/s

About 10 MB/s

Which transfer method does SCSI (Async) use?

A shared system clock

Request/acknowledge handshakes

Direct memory access

Why might someone convert between IDE (UDMA mode 1) and SCSI (Async)?

To upgrade device firmware

To benchmark legacy storage performance

To improve cable quality

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter