What Is This Tool?
This online converter translates data transfer values between IDE (DMA mode 0) and IDE (UDMA mode 1), two legacy transfer modes used in older Parallel ATA (PATA) devices. It helps users understand and work with different legacy ATA DMA timings and speeds.
How to Use This Tool?
-
Enter the value in IDE (DMA mode 0) to convert
-
Select IDE (DMA mode 0) as the input unit and IDE (UDMA mode 1) as the output unit
-
Submit the input to get the equivalent value in IDE (UDMA mode 1)
-
Review conversion results to assist in performance tuning or benchmarking
Key Features
-
Converts between IDE (DMA mode 0) and IDE (UDMA mode 1) data transfer modes
-
Supports legacy ATA/IDE standards common in older PATA devices
-
Useful for vintage PC diagnostics, embedded systems, and BIOS configuration
-
Browser-based and easy to use without additional software
-
Displays conversion using defined transfer mode rates
Examples
-
5 IDE (DMA mode 0) converts to 0.84 IDE (UDMA mode 1)
-
10 IDE (DMA mode 0) converts to 1.68 IDE (UDMA mode 1)
Common Use Cases
-
Converting transfer modes to tune or diagnose legacy PATA hard drives
-
Benchmarking expected throughput for vintage IDE hard disks or optical drives
-
Troubleshooting BIOS or device driver settings on older systems
-
Improving embedded or industrial systems that rely on legacy IDE interfaces
-
Testing and development of drivers requiring specific DMA mode configurations
Tips & Best Practices
-
Use this converter to aid vintage PC maintenance where understanding DMA modes is critical
-
Apply conversions carefully to ensure correct BIOS or driver settings
-
Verify cable and hardware compatibility when diagnosing transfer speed issues
-
Use the results to benchmark or estimate performance during system tuning
-
Remember the conversion is specific to legacy PATA devices only
Limitations
-
Applicable only to legacy Parallel ATA (PATA) hardware and interfaces
-
Conversion rates are theoretical and actual throughput may vary due to hardware and system factors
-
Not valid for newer storage technologies or interfaces beyond PATA standards
-
Physical hardware constraints limit the accuracy of mode comparisons
Frequently Asked Questions
-
What types of devices use IDE (DMA mode 0)?
-
Legacy PATA hard drives in older desktops or laptops and embedded systems using legacy IDE interfaces commonly use IDE (DMA mode 0).
-
Why convert from IDE (DMA mode 0) to IDE (UDMA mode 1)?
-
Users convert between these modes to facilitate system tuning, diagnostics, or performance benchmarking on vintage PATA hardware.
-
Can this conversion be used for modern storage devices?
-
No, this conversion only applies to legacy PATA devices; modern storage interfaces use different protocols and speeds.
Key Terminology
-
IDE (DMA mode 0)
-
The first direct memory access transfer mode defined for ATA/IDE devices, enabling low-speed block data transfer without CPU-driven I/O.
-
IDE (UDMA mode 1)
-
An Ultra DMA transfer mode providing a theoretical maximum raw transfer rate of about 25 MB/s, used in legacy Parallel ATA devices.
-
PATA
-
Parallel ATA, an interface standard for connecting storage devices including IDE hard drives using parallel signaling.