What does IDE (UDMA mode 1) represent?

IDE (UDMA mode 1) is an Ultra DMA transfer mode for Parallel ATA interfaces with a theoretical maximum transfer rate of about 25 MB/s, used in older PATA devices.

What is STS24 (signal)?

STS24 is a SONET synchronous transport signal formed by multiplexing 24 STS-1 channels, with a nominal line rate around 1.244 Gbit/s used in optical carrier networks.

Why would I convert from IDE (UDMA mode 1) to STS24?

Converting helps benchmark legacy IDE transfer speeds against modern high-speed SONET signals for network planning, reporting, or integrating vintage systems.

How to Convert from IDE (UDMA mode 1) to STS24 (signal)?

Easily convert data transfer rates from IDE (UDMA mode 1) mode to STS24 (signal) using this online unit converter. Understand legacy PATA drive speeds in terms of high-speed SONET signals.

IDE (UDMA mode 1)

STS24 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 1) to STS24 (signal) Conversion Table

IDE (UDMA mode 1)	STS24 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 1) to STS24 (signal) Conversion Table
IDE (UDMA mode 1)	STS24 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool converts data transfer rates between IDE (UDMA mode 1), a legacy transfer mode for PATA devices, and STS24, a high-speed SONET signal used in telecommunications. It helps relate older IDE interface speeds to modern optical network rates.

How to Use This Tool?

Enter the data transfer rate value measured in IDE (UDMA mode 1).
Select the source unit as IDE (UDMA mode 1).
Choose the target unit as STS24 (signal).
Click convert to see the equivalent rate in STS24 (signal).

Key Features

Converts IDE (UDMA mode 1) transfer rates to STS24 (signal) units.
Provides clear definitions and use cases for both units.
Includes example conversions for better understanding.
Browser-based and user-friendly interface.

Examples

5 IDE (UDMA mode 1) equals approximately 0.804 STS24 (signal).
10 IDE (UDMA mode 1) equals approximately 1.608 STS24 (signal).

Common Use Cases

Diagnosing or specifying BIOS and drive transfer settings on vintage PATA systems.
Benchmarking legacy IDE device throughput against modern SONET transport signals.
Planning and comparing data transfer capabilities in mixed legacy and modern network environments.
Analyzing carrier-grade optical network backhaul capacity in relation to older IDE speeds.

Tips & Best Practices

Use this tool for comparative or planning purposes rather than precise performance measurement.
Be aware that actual transfer rates may vary due to hardware and environmental factors.
Consider the overhead in STS24 signals that reduces usable payload bandwidth slightly.
Combine this conversion with knowledge of network infrastructure for comprehensive analysis.

Limitations

IDE (UDMA mode 1) transfer rate is a theoretical maximum and may not reflect actual speeds.
STS24 nominal rates include framing overhead, so usable bandwidth is somewhat less.
These units represent fundamentally different technologies; conversion is approximate.
Not suitable for precise data throughput calculations but useful for benchmarking and planning.

Frequently Asked Questions

What does IDE (UDMA mode 1) represent?: IDE (UDMA mode 1) is an Ultra DMA transfer mode for Parallel ATA interfaces with a theoretical maximum transfer rate of about 25 MB/s, used in older PATA devices.
What is STS24 (signal)?: STS24 is a SONET synchronous transport signal formed by multiplexing 24 STS-1 channels, with a nominal line rate around 1.244 Gbit/s used in optical carrier networks.
Why would I convert from IDE (UDMA mode 1) to STS24?: Converting helps benchmark legacy IDE transfer speeds against modern high-speed SONET signals for network planning, reporting, or integrating vintage systems.

Key Terminology

IDE (UDMA mode 1): A legacy Ultra DMA transfer mode for Parallel ATA devices with a theoretical max transfer rate of approximately 25 MB/s.
STS24 (signal): A SONET synchronous transport signal formed by multiplexing 24 STS-1 signals, with a nominal rate near 1.244 Gbit/s.
SONET: Synchronous Optical Network, a standard for optical telecommunications transport.
PATA: Parallel ATA, an older interface standard for connecting storage devices like hard drives.

Quick Knowledge Check

What is the approximate maximum raw transfer rate of IDE (UDMA mode 1)?

About 25 MB/s

About 1.244 Gbit/s

About 51.84 Mbit/s

How many STS-1 channels are multiplexed to form an STS24 signal?

12 channels

24 channels

48 channels

Which statement is true about IDE (UDMA mode 1) and STS24 units?

They measure the same technology

They represent fundamentally different technologies

STS24 is a PATA interface mode

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter