What does IDE (UDMA mode 1) represent?

IDE (UDMA mode 1) is an Ultra DMA transfer mode for Parallel ATA interfaces providing a theoretical maximum transfer rate of about 25 MB/s, used mainly in older PATA devices.

What is ISDN (dual channel)?

ISDN (dual channel) refers to using both 64 kbit/s bearer channels in an ISDN Basic Rate Interface simultaneously, delivering combined data throughput around 128 kbit/s.

Why convert between IDE (UDMA mode 1) and ISDN (dual channel)?

This conversion helps compare data transfer rates from legacy PATA drives to telecommunication channel capacities, assisting in diagnostics, network setup, and compatibility analysis.

Convert IDE (UDMA mode 1) to ISDN (dual channel) Data Transfer Rates

Easily convert data transfer rates from IDE (UDMA mode 1), a legacy PATA transfer mode, to ISDN (dual channel), a telecommunication channel bonding configuration, with clear examples and practical guidance.

IDE (UDMA mode 1)

ISDN (dual channel)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 1) to ISDN (dual channel) Conversion Table

IDE (UDMA mode 1)	ISDN (dual channel)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 1) to ISDN (dual channel) Conversion Table
IDE (UDMA mode 1)	ISDN (dual channel)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter translates data transfer rates from IDE (UDMA mode 1), a Parallel ATA interface mode for older devices, into equivalent ISDN (dual channel) rates that use bonded ISDN B channels. It is designed for users managing legacy hardware and telecommunications interfaces.

How to Use This Tool?

Enter the value in IDE (UDMA mode 1) units you wish to convert
Select ISDN (dual channel) as the target unit
Initiate the conversion to see the result expressed in ISDN (dual channel)
Refer to examples for clarity on typical conversions

Key Features

Converts data transfer rates from IDE (UDMA mode 1) to ISDN (dual channel)
Provides conversion based on theoretical maximum raw transfer rates
Includes examples for quick reference
Helpful for vintage computing and telecommunication comparisons
Browser-based and easy to use

Examples

1 IDE (UDMA mode 1) equals 1562.5 ISDN (dual channel)
2 IDE (UDMA mode 1) equal 3125 ISDN (dual channel)

Common Use Cases

Specifying BIOS or drive transfer settings for vintage PATA devices
Benchmarking maximum throughput of older IDE hard disks
Translating storage interface speeds to telecommunication channel bandwidths
Analyzing network and hardware compatibility in legacy systems
Evaluating small-office internet access configurations using ISDN

Tips & Best Practices

Use the conversion for comparative analysis only, considering its theoretical basis
Be cautious interpreting results when comparing dissimilar technologies
Apply this tool when maintaining or troubleshooting vintage computing equipment
Consider protocol and line conditions affecting real-world throughput
Use alongside diagnostic and benchmarking tools for accuracy

Limitations

Conversion is theoretical and may not reflect actual throughput
ISDN (dual channel) bandwidth is much lower than IDE (UDMA mode 1)
Non-standard conversion between a hardware interface and telecom channel descriptor
External factors like protocol overhead and line conditions affect results
Not suitable for precise performance measurement

Frequently Asked Questions

What does IDE (UDMA mode 1) represent?: IDE (UDMA mode 1) is an Ultra DMA transfer mode for Parallel ATA interfaces providing a theoretical maximum transfer rate of about 25 MB/s, used mainly in older PATA devices.
What is ISDN (dual channel)?: ISDN (dual channel) refers to using both 64 kbit/s bearer channels in an ISDN Basic Rate Interface simultaneously, delivering combined data throughput around 128 kbit/s.
Why convert between IDE (UDMA mode 1) and ISDN (dual channel)?: This conversion helps compare data transfer rates from legacy PATA drives to telecommunication channel capacities, assisting in diagnostics, network setup, and compatibility analysis.

Key Terminology

IDE (UDMA mode 1): An Ultra DMA transfer mode for Parallel ATA interfaces in older PATA devices with a theoretical max of 25 MB/s.
ISDN (dual channel): A telecommunication setup combining two 64 kbit/s ISDN B channels to provide roughly 128 kbit/s bandwidth.
Ultra DMA: A data transfer protocol for Parallel ATA devices enhancing speed and error checking.
ISDN Basic Rate Interface: An ISDN service configuration featuring two bearer (B) channels and one delta (D) channel for voice and data.

Quick Knowledge Check

What is the approximate maximum transfer rate of IDE (UDMA mode 1)?

About 128 kbit/s

About 25 MB/s

About 2 MB/s

What does ISDN (dual channel) combine to achieve its throughput?

Two 64 kbit/s B channels

One 128 kbit/s B channel

Three 64 kbit/s B channels

What is a key limitation of converting IDE (UDMA mode 1) to ISDN (dual channel)?

It is a precise standard conversion

Actual throughput varies due to overhead

Both represent the same technology

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter