What is IDE (UDMA mode 1)?

IDE (UDMA mode 1) is an Ultra DMA transfer mode for Parallel ATA interfaces with a maximum theoretical rate of about 25 MB/s, used especially in older PATA drives.

Why convert IDE (UDMA mode 1) speeds to terabyte per second?

Converting helps compare legacy PATA drive speeds with modern high-bandwidth storage and network data rates for benchmarking and system upgrade analysis.

Is the converted TB/s value exact for real-time performance?

No, the conversion reflects theoretical maximum throughput for comparison and analysis, not real-time performance measurements.

How to Convert from IDE (UDMA mode 1) to Terabyte/second [TB/s]

Convert IDE (UDMA mode 1) data transfer rates to terabyte per second (TB/s) to compare legacy PATA interface speeds with modern high-bandwidth data rates.

IDE (UDMA mode 1)

Terabyte/second [TB/s]

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 1) to Terabyte/second [TB/s] Conversion Table

IDE (UDMA mode 1)	Terabyte/second [TB/s]

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 1) to Terabyte/second [TB/s] Conversion Table
IDE (UDMA mode 1)	Terabyte/second [TB/s]

Explore More Data Transfer Units Converter

What Is This Tool?

This unit converter transforms data transfer speeds from IDE (UDMA mode 1), a legacy PATA interface transfer mode, into terabyte per second (TB/s), a modern high-bandwidth data rate unit. It supports comparisons between older and current data transfer technologies.

How to Use This Tool?

Enter the data transfer rate value in IDE (UDMA mode 1) units.
Select IDE (UDMA mode 1) as the source unit and terabyte/second [TB/s] as the target unit.
Click convert to see the equivalent data rate in TB/s.

Key Features

Converts IDE (UDMA mode 1) transfer rates directly into terabyte per second (TB/s).
Useful for benchmarking vintage PATA drives against modern storage and network speeds.
Provides a theoretical conversion reflecting the maximum throughput defined by ATA standards.
Browser-based and easy to use without needing additional software.

Examples

1 IDE (UDMA mode 1) equals 0.0000227374 TB/s.
10 IDE (UDMA mode 1) equals 0.000227374 TB/s.

Common Use Cases

Diagnosing BIOS or drive settings on vintage PCs using PATA interfaces.
Benchmarking throughput of older IDE hard disks or optical drives.
Comparing legacy data rates with those of high-performance NVMe SSD arrays or data-center backbones.
Planning infrastructure for scientific data streams and HPC interconnects.

Tips & Best Practices

Use this conversion primarily for analytical or comparative purposes between legacy and modern transfer rates.
Be aware of the difference between decimal TB and binary TiB, as it may slightly influence precision in some contexts.
Double-check that the input values accurately represent maximum throughput defined by the IDE (UDMA mode 1) specification.

Limitations

IDE (UDMA mode 1) transfer rate is a fixed legacy speed around 25 MB/s, much lower than typical TB/s rates.
Conversion is not intended for real-time performance measurements on modern systems.
Decimal versus binary prefix variations can affect exact precision in conversion results.

Frequently Asked Questions

What is IDE (UDMA mode 1)?: IDE (UDMA mode 1) is an Ultra DMA transfer mode for Parallel ATA interfaces with a maximum theoretical rate of about 25 MB/s, used especially in older PATA drives.
Why convert IDE (UDMA mode 1) speeds to terabyte per second?: Converting helps compare legacy PATA drive speeds with modern high-bandwidth storage and network data rates for benchmarking and system upgrade analysis.
Is the converted TB/s value exact for real-time performance?: No, the conversion reflects theoretical maximum throughput for comparison and analysis, not real-time performance measurements.

Key Terminology

IDE (UDMA mode 1): An Ultra DMA transfer mode for Parallel ATA interfaces with a theoretical maximum raw transfer rate of about 25 MB/s, used in older PATA devices.
Terabyte per second (TB/s): A data transfer rate unit representing the transfer of one terabyte of data per second, commonly used to quantify very high bandwidth links and aggregate throughput.
ATA/ATAPI standards: Standards defining transfer modes and protocols for Parallel ATA and AT Attachment Packet Interface devices, including legacy modes such as IDE (UDMA mode 1).

Quick Knowledge Check

What does IDE (UDMA mode 1) primarily relate to?

Modern NVMe SSDs

Old PATA interface transfer mode

Data center backbone speed

What unit is used to represent very high data transfer rates in this converter?

Megabytes per second

Terabyte per second (TB/s)

Kilobytes per second

What is a main limitation of converting IDE (UDMA mode 1) to TB/s?

It accurately measures real-time speeds

It only serves comparative and analytical roles

It is used for cable compatibility checks

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter