What is IDE (UDMA mode 1)?

IDE (UDMA mode 1) is a transfer mode used in older Parallel ATA devices, offering a theoretical maximum raw data rate of about 25 MB/s.

What does STM-64 (signal) represent?

STM-64 is a Synchronous Transport Module signal in SDH with a line rate near 10 Gbit/s, used in high-capacity fiber-optic networks.

Why convert from IDE (UDMA mode 1) to STM-64 (signal)?

Converting helps compare and integrate older device transfer rates with modern telecommunications signals, useful in network planning and diagnostics.

How to Convert from IDE (UDMA mode 1) to STM-64 (signal)?

Convert data transfer rates from IDE (UDMA mode 1), a legacy PATA interface mode, to STM-64 (signal), a high-capacity SDH telecommunications signal. Understand the use, conversion process, and contexts for integrating legacy and modern transfer technologies.

IDE (UDMA mode 1)

STM-64 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 1) to STM-64 (signal) Conversion Table

IDE (UDMA mode 1)	STM-64 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 1) to STM-64 (signal) Conversion Table
IDE (UDMA mode 1)	STM-64 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter helps you transform data transfer values from IDE (UDMA mode 1), a legacy Ultra DMA mode used in older Parallel ATA devices, into STM-64 (signal), a high-speed telecommunications signal used in modern fiber-optic networks.

How to Use This Tool?

Enter the value in IDE (UDMA mode 1) units you wish to convert
Select IDE (UDMA mode 1) as the source unit and STM-64 (signal) as the target unit
Review the converted value displayed based on the established conversion formula
Apply the results for diagnostics, planning, or comparative analysis between technologies

Key Features

Supports conversion between IDE (UDMA mode 1) and STM-64 (signal) data transfer units
Provides a clear numerical conversion rate based on standardized definitions
Useful for integrating legacy PATA device rates with modern high-capacity network signals
Browser-based and easy to use for IT and telecommunications professionals

Examples

5 IDE (UDMA mode 1) converts to approximately 0.100469393 STM-64 (signal)
10 IDE (UDMA mode 1) converts to approximately 0.200938786 STM-64 (signal)

Common Use Cases

Diagnosing or specifying BIOS and drive transfer settings on vintage PCs with PATA devices
Benchmarking expected throughput of older IDE hard disks in relation to modern signals
Planning telecommunications networks combining legacy data transfer rates with fiber optic capacities
Troubleshooting compatibility and performance issues between old and new data transfer technologies

Tips & Best Practices

Use this converter to compare theoretical maximum rates, not actual device performance
Consider overhead and device condition when interpreting legacy IDE transfer rates
Apply conversions cautiously, as STM-64 rates represent aggregated signals rather than single-device values
Leverage the tool for planning upgrades between legacy hardware and modern telecommunications infrastructure

Limitations

IDE (UDMA mode 1) transfer rates are theoretical and may be lower in real-world conditions
STM-64 (signal) reflects aggregated high-speed telecommunications signals, not direct single-device speeds
Conversions do not account for protocol overhead, latency, or error correction factors
Comparisons are meaningful mainly within proper technical contexts involving legacy and modern systems

Frequently Asked Questions

What is IDE (UDMA mode 1)?: IDE (UDMA mode 1) is a transfer mode used in older Parallel ATA devices, offering a theoretical maximum raw data rate of about 25 MB/s.
What does STM-64 (signal) represent?: STM-64 is a Synchronous Transport Module signal in SDH with a line rate near 10 Gbit/s, used in high-capacity fiber-optic networks.
Why convert from IDE (UDMA mode 1) to STM-64 (signal)?: Converting helps compare and integrate older device transfer rates with modern telecommunications signals, useful in network planning and diagnostics.

Key Terminology

IDE (UDMA mode 1): An Ultra DMA transfer mode for Parallel ATA interfaces providing about 25 MB/s theoretical maximum data rate.
STM-64 (signal): A synchronous digital hierarchy signal with a line rate near 10 Gbit/s, used in telecommunications fiber-optic networks.
Conversion Rate: The numerical factor relating one unit of data transfer rate to another, here 1 IDE (UDMA mode 1) equals 0.0200938786 STM-64 (signal).

Quick Knowledge Check

What is the approximate theoretical transfer rate of IDE (UDMA mode 1)?

10 GB/s

25 MB/s

9.95328 Gbit/s

STM-64 (signal) is primarily used in which technology?

Legacy PATA devices

High-capacity fiber links

Home Wi-Fi routers

What does this tool help users compare?

Different hard drive brands

Legacy IDE transfer rates with modern telecom signals

Computer screen resolutions

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter