What does IDE (UDMA mode 1) represent?

IDE (UDMA mode 1) is an Ultra DMA transfer mode for Parallel ATA interfaces with a theoretical maximum raw transfer rate of about 25 MB/s, used mainly in older PATA devices.

What is STS12 (signal) used for?

STS12 (signal) is a SONET transport signal with a line rate of 622.08 Mbit/s, commonly used in high-speed optical networks such as carrier or ISP backbone links.

Why is converting between IDE (UDMA mode 1) and STS12 useful?

It helps relate legacy disk interface speeds to modern telecommunications data rates, useful for analysis, benchmarking, and network design involving integration of diverse systems.

How to Convert from IDE (UDMA mode 1) to STS12 (signal)

Convert data transfer units between IDE (UDMA mode 1), a legacy PATA interface mode, and STS12 (signal), a high-speed SONET transport signal used in modern telecommunications.

IDE (UDMA mode 1)

STS12 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 1) to STS12 (signal) Conversion Table

IDE (UDMA mode 1)	STS12 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 1) to STS12 (signal) Conversion Table
IDE (UDMA mode 1)	STS12 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool allows users to convert data transfer rates from IDE (UDMA mode 1), a legacy Ultra DMA mode for Parallel ATA devices, to STS12 (signal), a SONET synchronous transport signal commonly used in optical networks.

How to Use This Tool?

Enter the value in IDE (UDMA mode 1) units you want to convert.
Select IDE (UDMA mode 1) as the source unit and STS12 (signal) as the target unit.
Click the convert button to get the equivalent data transfer rate in STS12 (signal).

Key Features

Supports conversion between legacy IDE (UDMA mode 1) and modern STS12 data transfer units.
Based on standard definitions and maximum theoretical raw transfer rates.
Provides quick unit conversions useful for telecommunications and hardware diagnostics.

Examples

1 IDE (UDMA mode 1) equals approximately 0.3215 STS12 (signal).
2 IDE (UDMA mode 1) equals approximately 0.6430 STS12 (signal).

Common Use Cases

Comparing legacy PATA hard drive data rates to modern optical network speeds.
Analyzing or benchmarking vintage PC and PATA drive transfer capabilities.
Integrating or relating older disk interface speeds with high-speed telecommunications infrastructure.

Tips & Best Practices

Use this tool to understand theoretical data transfer equivalences rather than exact real-world throughput.
Apply conversions primarily for analytical or benchmarking purposes in network design or legacy hardware contexts.
Be aware of protocol and overhead differences affecting actual data rates beyond this conversion.

Limitations

Conversion reflects theoretical maximum raw transfer rates, not accounting for overhead or errors.
IDE (UDMA mode 1) is a legacy mode with limited modern use; practical conversions are mostly for analysis.
STS12 operates in high-speed optical networks, so direct practical conversion cases are uncommon.

Frequently Asked Questions

What does IDE (UDMA mode 1) represent?: IDE (UDMA mode 1) is an Ultra DMA transfer mode for Parallel ATA interfaces with a theoretical maximum raw transfer rate of about 25 MB/s, used mainly in older PATA devices.
What is STS12 (signal) used for?: STS12 (signal) is a SONET transport signal with a line rate of 622.08 Mbit/s, commonly used in high-speed optical networks such as carrier or ISP backbone links.
Why is converting between IDE (UDMA mode 1) and STS12 useful?: It helps relate legacy disk interface speeds to modern telecommunications data rates, useful for analysis, benchmarking, and network design involving integration of diverse systems.

Key Terminology

IDE (UDMA mode 1): An Ultra DMA transfer mode of the Parallel ATA interface that offers a theoretical raw transfer speed of about 25 MB/s used in older PATA devices.
STS12 (signal): A SONET synchronous transport signal with a line rate of 622.08 Mbit/s, used in high-speed optical transport networks.
SONET: Synchronous Optical Network, a standardized digital communication protocol used to transmit multiple digital bit streams over optical fiber.
Ultra DMA: A transfer mode protocol for Parallel ATA devices that enhances data transfer speed and reliability.

Quick Knowledge Check

What is the approximate theoretical maximum transfer rate of IDE (UDMA mode 1)?

25 MB/s

622.08 Mbit/s

12 × 51.84 Mbit/s

STS12 (signal) is part of which network technology?

USB

SONET

PATA

What is a common use of converting IDE (UDMA mode 1) to STS12?

Calculating electrical voltage

Benchmarking legacy to modern data rates

Changing file formats

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter