What Is This Tool?
This converter helps you translate data transfer rates from terabyte per second (SI definition), a unit used for extremely high throughput in modern digital systems, into SCSI (Fast Wide) units, which are relevant for legacy storage interfaces. It is ideal for comparing performance levels between cutting-edge and older technologies.
How to Use This Tool?
-
Enter the data transfer rate value in terabyte per second (SI definition).
-
Select terabyte/second (SI def.) as the source unit and SCSI (Fast Wide) as the target unit.
-
Initiate the conversion to see the equivalent transfer rate expressed in SCSI (Fast Wide).
-
Use the results to compare or map modern throughput to legacy SCSI interface speeds.
Key Features
-
Converts terabyte/second (SI def.) to SCSI (Fast Wide) units accurately based on standard conversion rates.
-
Useful for comparing modern data transfer speeds with legacy SCSI hardware capabilities.
-
Browser-based and easy to use with straightforward inputs and outputs.
-
Supports conversion scenarios common in data centers, HPC clusters, and scientific research settings.
Examples
-
2 terabyte/second (SI def.) converts to 100000 SCSI (Fast Wide).
-
0.5 terabyte/second (SI def.) converts to 25000 SCSI (Fast Wide).
Common Use Cases
-
Matching high-performance computing interconnect rates with legacy SCSI-based storage subsystems.
-
Evaluating throughput of modern storage arrays in terms of older SCSI Fast Wide interface speeds.
-
Assessing compatibility and performance expectations when integrating or upgrading systems involving legacy SCSI peripherals.
Tips & Best Practices
-
Always consider that SCSI (Fast Wide) real-world throughput depends on physical implementation factors.
-
Use this conversion primarily for comparison or legacy system mapping, not direct data transfer equivalence.
-
Verify device negotiation and cable quality to understand actual effective data rates when using SCSI Fast Wide hardware.
Limitations
-
Actual SCSI (Fast Wide) speeds can be lower than theoretical maximums due to cable length and signaling methods.
-
Terabyte/second units represent data rates far beyond SCSI Fast Wide capacity, so conversion serves mainly comparative or legacy purposes.
Frequently Asked Questions
-
What does terabyte/second (SI def.) represent?
-
It is a data transfer rate measuring one terabyte (10^12 bytes) moved each second, equal to 8 × 10^12 bits per second used in high-throughput digital systems.
-
What is SCSI (Fast Wide)?
-
SCSI (Fast Wide) is a SCSI-2 interface mode combining 10 MHz Fast timing with a 16-bit wide data bus, supporting theoretical throughput of about 20 megabytes per second.
-
Why convert from terabyte/second to SCSI (Fast Wide)?
-
To relate modern data rates with legacy SCSI hardware speeds, assisting in performance evaluation and system integration involving older storage interfaces.
Key Terminology
-
Terabyte/second (SI def.)
-
A data transfer rate unit equaling one trillion bytes moved every second, used to quantify extremely high throughput digital systems.
-
SCSI (Fast Wide)
-
A SCSI-2 interface that combines 10 MHz Fast timing with a 16-bit wide bus, achieving about 20 MB/s theoretical data transfer rates on a 16-bit single-ended implementation.
-
Data transfer rate
-
A measure of how quickly data can be moved from one place to another in a given amount of time.