What does SCSI (Fast Wide) stand for?

SCSI (Fast Wide) is a SCSI-2 interface mode combining 10 MHz timing with a 16-bit data bus, enabling theoretical speeds up to 20 MB/s for a 16-bit implementation.

What is T4 (signal) used for?

T4 (signal) is a high-order trunk signal in the North American T-carrier hierarchy, historically used for long-distance backbone telecom links at about 274.176 Mbps.

Can I rely on this conversion for exact throughput?

No, this converter uses theoretical maximum rates; actual throughput varies based on hardware and environment factors.

Convert SCSI (Fast Wide) to T4 (signal) Data Transfer Units

Effortlessly convert data transfer rates from SCSI (Fast Wide) to T4 (signal) units. Understand legacy hardware throughput comparisons with this practical online converter tool.

SCSI (Fast Wide)

T4 (signal)

Please check your input. It must be a valid numeric value.

SCSI (Fast Wide) to T4 (signal) Conversion Table

SCSI (Fast Wide)	T4 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (Fast Wide) to T4 (signal) Conversion Table
SCSI (Fast Wide)	T4 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This unit converter facilitates the translation of data transfer rates between SCSI (Fast Wide), a storage interface standard, and T4 (signal), a legacy telecommunications trunk rate. It serves engineers and technicians managing or analyzing legacy server storage and telecommunication systems where these units are relevant.

How to Use This Tool?

Enter the value in SCSI (Fast Wide) units you wish to convert
Select SCSI (Fast Wide) as the input unit and T4 (signal) as the output unit
Click the convert button to get the equivalent T4 (signal) value
Review the result for benchmarking or analysis purposes

Key Features

Converts data transfer rates from SCSI (Fast Wide) to T4 (signal) units
Provides a simple, browser-based interface for quick conversions
Supports comparisons between storage interface throughput and telecom trunk rates
Uses established theoretical conversion factors for consistent results

Examples

Converting 5 SCSI (Fast Wide) yields approximately 2.9178 T4 (signal)
10 SCSI (Fast Wide) equals roughly 5.8357 T4 (signal)

Common Use Cases

Comparing legacy data storage throughput with telecom carrier rates
Testing and validation of legacy telecommunications equipment using T4 signaling
Managing and benchmarking RAID controllers and disk drives in older servers
Analyzing performance where legacy storage and telecom units overlap

Tips & Best Practices

Understand that SCSI (Fast Wide) throughput can vary based on hardware and implementation
Use this tool primarily for theoretical or benchmarking purposes due to legacy unit limitations
Verify conversions against device-specific performance when possible
Be aware that T4 (signal) is a historical standard mostly replaced in modern networks

Limitations

SCSI (Fast Wide) actual throughput depends on factors like cable length and device negotiation
T4 (signal) is largely obsolete, with modern networks using more current protocols
Conversions assume theoretical maximum rates and may not reflect real-world sustained speeds

Frequently Asked Questions

What does SCSI (Fast Wide) stand for?: SCSI (Fast Wide) is a SCSI-2 interface mode combining 10 MHz timing with a 16-bit data bus, enabling theoretical speeds up to 20 MB/s for a 16-bit implementation.
What is T4 (signal) used for?: T4 (signal) is a high-order trunk signal in the North American T-carrier hierarchy, historically used for long-distance backbone telecom links at about 274.176 Mbps.
Can I rely on this conversion for exact throughput?: No, this converter uses theoretical maximum rates; actual throughput varies based on hardware and environment factors.

Key Terminology

SCSI (Fast Wide): A SCSI-2 interface mode with 10 MHz timing and a 16-bit data bus, enabling theoretical 20 MB/s throughput in legacy storage systems.
T4 (signal): A high-order telecommunications trunk signal in the T-carrier hierarchy, historically used for long-distance backbone links at roughly 274.176 Mbps.
Data Transfer Rate: A measurement of how much data is moved over a connection per unit of time.

Quick Knowledge Check

What is the approximate data rate of a single SCSI (Fast Wide) unit?

10 megabytes per second

20 megabytes per second

274 megabytes per second

Which unit corresponds to a high-order trunk signal used historically in telecom?

SCSI (Fast Wide)

T4 (signal)

SONET

Why might actual throughput differ from conversion results?

Because the converter uses real-time device data

Because implementation factors affect real throughput

Because T4 is a modern network standard

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter