What does SCSI (Fast Wide) represent?

SCSI (Fast Wide) is a SCSI-2 interface mode combining 10 MHz Fast timing with a 16-bit wide data bus, enabling theoretical maximum throughput of 20 megabytes per second with a 16-bit single-ended setup.

How is kilobyte per second (SI definition) different from binary units?

Kilobyte per second (SI def.) equals 1000 bytes per second, unlike binary units such as Kibibyte per second which are based on 1024 bytes.

Why convert from SCSI (Fast Wide) to kilobyte per second?

Converting allows users to express legacy SCSI device speeds in a widely recognized unit, facilitating easier comparison and reporting in modern contexts.

How to Convert from SCSI (Fast Wide) to Kilobyte/second (SI def.)

Learn how to convert data transfer rates from SCSI (Fast Wide) units to kilobyte per second using the SI definition. Understand the conversion process, use cases, and limitations of both units.

SCSI (Fast Wide)

Kilobyte/second (SI def.)

Please check your input. It must be a valid numeric value.

SCSI (Fast Wide) to Kilobyte/second (SI def.) Conversion Table

SCSI (Fast Wide)	Kilobyte/second (SI def.)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (Fast Wide) to Kilobyte/second (SI def.) Conversion Table
SCSI (Fast Wide)	Kilobyte/second (SI def.)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter translates data transfer rates measured in SCSI (Fast Wide) units into kilobyte per second (SI definition) values. It helps users express legacy SCSI throughput in a standardized data transfer rate for easier interpretation and comparison.

How to Use This Tool?

Enter the value in SCSI (Fast Wide) units you want to convert
Select SCSI (Fast Wide) as the source unit and kilobyte/second (SI def.) as the target unit
Initiate the conversion to receive the equivalent data rate in kilobyte per second (SI definition)

Key Features

Converts between SCSI (Fast Wide) interface speeds and kilobyte per second (SI) units
Based on established theoretical maximum throughput values for accurate conversions
Suitable for evaluating legacy hardware and storage performance metrics
Simple, browser-based interface for quick unit translation

Examples

1 SCSI (Fast Wide) equals 20,000 kilobyte/second (SI def.)
0.5 SCSI (Fast Wide) is equivalent to 10,000 kilobyte/second (SI def.)

Common Use Cases

Translating legacy SCSI bus speeds into common data transfer units for system diagnostics
Comparing throughput of older RAID controllers with modern storage bandwidth metrics
Reporting transfer rates during IT infrastructure maintenance involving legacy hardware

Tips & Best Practices

Confirm the physical implementation details of your SCSI interface as throughput may vary
Use the SI definition of kilobyte for consistent reporting where precision on base units matters
Verify unit clarity when comparing rates to avoid confusion with binary-based units

Limitations

Practical throughput for SCSI (Fast Wide) may differ from theoretical maximum due to hardware and cable variances
Kilobyte per second here uses 1000 bytes, which differs from binary kilobyte definitions such as Kibibyte
The conversion reflects ideal rates without accounting for real-world negotiation or signal behavior

Frequently Asked Questions

What does SCSI (Fast Wide) represent?: SCSI (Fast Wide) is a SCSI-2 interface mode combining 10 MHz Fast timing with a 16-bit wide data bus, enabling theoretical maximum throughput of 20 megabytes per second with a 16-bit single-ended setup.
How is kilobyte per second (SI definition) different from binary units?: Kilobyte per second (SI def.) equals 1000 bytes per second, unlike binary units such as Kibibyte per second which are based on 1024 bytes.
Why convert from SCSI (Fast Wide) to kilobyte per second?: Converting allows users to express legacy SCSI device speeds in a widely recognized unit, facilitating easier comparison and reporting in modern contexts.

Key Terminology

SCSI (Fast Wide): An interface mode in SCSI-2 combining 10 MHz Fast timing and a 16-bit wide data bus providing theoretical data throughput of 20 megabytes per second.
Kilobyte per second (SI definition): A unit of data transfer rate defined as 1000 bytes transferred per second, distinct from binary-based units.

Quick Knowledge Check

What is the theoretical maximum throughput of SCSI (Fast Wide)?

10 megabytes per second

20 megabytes per second

30 megabytes per second

How many bytes per second does a kilobyte per second (SI definition) represent?

1024 bytes

1000 bytes

2048 bytes

Why is it important to clarify the unit definition when comparing transfer rates?

Because SI and binary units have different byte counts

Because all units mean the same in every context

Because transfer rates never vary

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter