What Is This Tool?
This tool allows users to convert data transfer values from Virtual Tributary 6 (signal), a SONET standardized sub-channel, to SCSI (Fast Wide), a legacy SCSI-2 interface mode. It helps translate between telecommunications data rates and storage interface throughput.
How to Use This Tool?
-
Enter the quantity of Virtual Tributary 6 (signal) units you wish to convert.
-
Select Virtual Tributary 6 (signal) as the input unit and SCSI (Fast Wide) as the output unit.
-
Click the convert button to view the corresponding value in SCSI (Fast Wide).
Key Features
-
Converts between Virtual Tributary 6 (signal) and SCSI (Fast Wide) units
-
Based on the official conversion rate 1 VT6 = 0.03945 SCSI (Fast Wide)
-
Supports data transfer measurements relevant to telecommunications and storage systems
-
Browser-based and user-friendly interface for quick conversions
Examples
-
5 Virtual Tributary 6 (signal) converts to 0.19725 SCSI (Fast Wide)
-
10 Virtual Tributary 6 (signal) converts to 0.3945 SCSI (Fast Wide)
Common Use Cases
-
Mapping and transporting multiple PDH/TDM circuits over a SONET backbone using VT6 channels
-
Connecting disk drives and RAID controllers with SCSI (Fast Wide) to improve throughput
-
Converting bandwidth metrics between SONET/SDH telecommunications and legacy SCSI storage interfaces
-
Integrating network and storage subsystems in data centers requiring bandwidth compatibility
Tips & Best Practices
-
Understand the context in which VT6 and SCSI (Fast Wide) operate before conversion
-
Use this converter to assist in planning integration of telecom and storage systems
-
Consider the impact of hardware and signaling differences on practical throughput
-
Verify conversions against device specifications for accurate bandwidth matching
Limitations
-
Conversion rates represent theoretical values and may not reflect actual throughput
-
Performance varies due to protocol overhead, cable quality, and device negotiations
-
Direct comparisons between VT6 signals and SCSI interfaces are conceptual and context-specific
Frequently Asked Questions
-
What is a Virtual Tributary 6 (VT6) signal?
-
VT6 is a logical sub-channel in the SONET family used for carrying and multiplexing lower-rate client signals within an STS-1 payload, typically for traffic grooming and transporting legacy signals.
-
What does SCSI (Fast Wide) refer to?
-
SCSI (Fast Wide) is a SCSI-2 mode that uses a 16-bit wide data bus at 10 MHz timing, offering improved throughput of up to 20 MB/s for connecting storage devices and peripherals.
-
Why convert between VT6 and SCSI (Fast Wide) units?
-
Conversion helps in translating data rates between telecommunications networks using SONET/SDH and legacy computing storage interfaces, supporting integration and bandwidth analysis.
Key Terminology
-
Virtual Tributary 6 (VT6)
-
A standardized logical sub-channel in SONET used to carry and multiplex lower-rate client signals within an STS-1 payload.
-
SCSI (Fast Wide)
-
A SCSI-2 interface mode combining Fast timing at 10 MHz with a 16-bit wide data bus to enhance data transfer rates up to 20 MB/s.