What Is This Tool?
This converter transforms data transfer rates measured in kilobyte/second based on the SI definition into the SCSI (Fast Wide) unit, which represents the throughput of a SCSI-2 interface mode. It helps relate simple byte-based speeds to specialized legacy storage interface metrics.
How to Use This Tool?
-
Input the value in kilobyte/second (SI definition) you wish to convert.
-
Select kilobyte/second (SI def.) as the source unit.
-
Choose SCSI (Fast Wide) as the target unit.
-
Click convert to obtain the equivalent throughput in SCSI (Fast Wide).
-
Review the results to understand legacy device performance.
Key Features
-
Converts kilobyte/second (SI def.) units to SCSI (Fast Wide) throughput values.
-
Supports data transfer measurements relevant to legacy storage hardware.
-
Provides a straightforward calculation based on a fixed conversion rate.
-
Browser-based tool for quick and easy unit conversions.
-
Suitable for IT professionals managing devices with SCSI-2 interfaces.
Examples
-
1000 kilobyte/second (SI def.) equals 0.05 SCSI (Fast Wide).
-
20000 kilobyte/second (SI def.) converts to 1 SCSI (Fast Wide).
Common Use Cases
-
Reporting file download/upload speeds in applications using SI units.
-
Specifying throughput on embedded devices and serial communication links.
-
Converting data rates for storage I/O or backup transfer when using decimal prefixes.
-
Evaluating performance of SCSI-2 legacy disk drives and RAID controllers.
-
Assessing data rates for high-throughput tape and removable storage devices.
Tips & Best Practices
-
Confirm that the source unit uses the SI definition, not binary prefixes.
-
Remember that actual SCSI transfer rates can vary due to hardware implementation.
-
Use this conversion to compare byte-based data rates with SCSI throughput values.
-
Consider overhead and physical factors that affect real device speeds.
-
Utilize this tool for legacy system management and archival infrastructure planning.
Limitations
-
Conversion is based on a theoretical maximum throughput of the SCSI (Fast Wide) interface.
-
Actual performance depends on device conditions such as cable quality and negotiation.
-
Kilobyte/second (SI def.) rates do not account for protocol overhead present in SCSI transfers.
Frequently Asked Questions
-
What does a kilobyte per second (SI def.) represent?
-
It represents a data transfer rate equal to 1000 bytes per second, indicating how many bytes are transmitted or processed each second.
-
What is SCSI (Fast Wide)?
-
SCSI (Fast Wide) is a SCSI-2 interface mode combining Fast timing with a 16-bit wide data bus, achieving a theoretical maximum throughput of 20 megabytes per second.
-
Why is the conversion from kilobyte/second to SCSI (Fast Wide) useful?
-
It helps relate simple byte-based data transfer rates to legacy SCSI interface throughput parameters, aiding in understanding storage device performance.
Key Terminology
-
Kilobyte/second (SI def.)
-
A unit of data transfer rate equal to 1000 bytes per second, based on decimal prefixes.
-
SCSI (Fast Wide)
-
A SCSI-2 interface mode with a 16-bit data bus and Fast timing, allowing increased throughput over original SCSI.
-
Data Transfer Rate
-
The amount of data transmitted or processed per second.