What does IDE (UDMA mode 0) represent?

IDE (UDMA mode 0) is an Ultra DMA transfer mode for PATA/IDE devices defining interface timing and a nominal maximum raw data transfer rate.

How is a kilobyte per second (SI) defined?

A kilobyte per second (SI) equals 1000 bytes transferred each second, using the decimal prefix kilo (k = 10^3).

Why convert IDE (UDMA mode 0) to kilobyte/second (SI)?

Converting to kilobyte/second (SI) allows quantifying legacy PATA/IDE data rates in a standardized and widely understood unit.

Convert IDE (UDMA mode 0) to Kilobyte/Second (SI Definition) Easily

Learn how to convert data transfer rates from IDE (UDMA mode 0) units to kilobyte/second using the SI definition. Understand key facts, examples, and use cases for this legacy to modern unit conversion.

IDE (UDMA mode 0)

Kilobyte/second (SI def.)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 0) to Kilobyte/second (SI def.) Conversion Table

IDE (UDMA mode 0)	Kilobyte/second (SI def.)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 0) to Kilobyte/second (SI def.) Conversion Table
IDE (UDMA mode 0)	Kilobyte/second (SI def.)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter transforms data transfer rate values expressed in IDE (UDMA mode 0), a legacy Parallel ATA interface mode, into kilobyte per second units based on the SI definition. It helps users interpret and compare transfer speeds across legacy and modern devices.

How to Use This Tool?

Enter the data transfer rate value in IDE (UDMA mode 0) units
Select IDE (UDMA mode 0) as the source unit and kilobyte/second (SI) as the target unit
Click convert to see the equivalent transfer rate in kilobyte/second (SI definition)
Use the results to compare or report speeds in modern standardized units

Key Features

Converts IDE (UDMA mode 0) data transfer rates to standard kilobyte/second (SI) units
Supports legacy PATA/IDE interface speed representation
Provides quick calculations for modern data rate comparisons
Browser-based and easy to use with simple input options

Examples

1 IDE (UDMA mode 0) equals 16600 kilobyte/second (SI def.)
0.5 IDE (UDMA mode 0) equals 8300 kilobyte/second (SI def.)

Common Use Cases

Specifying or diagnosing throughput of legacy IDE hard drives and optical drives
Troubleshooting DMA timing in BIOS or device drivers to optimize performance
Comparing legacy PATA interface speeds with modern SATA or USB transfer rates
Reporting embedded device or sensor data rates using standardized units
Describing storage or backup transfer rates using SI prefixes

Tips & Best Practices

Always confirm whether the unit uses the SI decimal prefix (1000 bytes) or binary prefix (1024 bytes)
Use this tool to translate legacy hardware speed specs into commonly understood data rates
Keep in mind that nominal IDE speeds represent maximum raw throughput, actual rates may vary
Leverage the conversion for system migration planning and hardware diagnostics

Limitations

IDE (UDMA mode 0) values reflect nominal maximum raw transfer rates, which may not equal actual throughput
Kilobyte/second (SI) differs from binary-based units like KiB/s; confusing these may lead to inaccurate interpretations

Frequently Asked Questions

What does IDE (UDMA mode 0) represent?: IDE (UDMA mode 0) is an Ultra DMA transfer mode for PATA/IDE devices defining interface timing and a nominal maximum raw data transfer rate.
How is a kilobyte per second (SI) defined?: A kilobyte per second (SI) equals 1000 bytes transferred each second, using the decimal prefix kilo (k = 10^3).
Why convert IDE (UDMA mode 0) to kilobyte/second (SI)?: Converting to kilobyte/second (SI) allows quantifying legacy PATA/IDE data rates in a standardized and widely understood unit.

Key Terminology

IDE (UDMA mode 0): A Parallel ATA Ultra DMA transfer mode specifying interface timing and a nominal maximum raw transfer rate.
Kilobyte/second (SI): A data transfer rate unit representing 1000 bytes per second, based on the decimal kilo prefix.
Nominal Maximum Raw Data Transfer Rate: The highest theoretical speed of data transfer under ideal conditions, not accounting for overhead.

Quick Knowledge Check

What unit does IDE (UDMA mode 0) measure?

Data transfer rate for SATA devices

Maximum raw data transfer rate for PATA/IDE devices

File size in megabytes

How many bytes per second equal one kilobyte/second (SI def.)?

1024 bytes

1000 bytes

100 bytes

What should be considered when comparing kB/s and KiB/s?

kB/s uses 1024 bytes, KiB/s uses 1000 bytes

kB/s uses 1000 bytes, KiB/s uses 1024 bytes

Both use the same number of bytes

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter