What does IDE (UDMA mode 0) represent?

IDE (UDMA mode 0) is a transfer mode for Parallel ATA devices defining interface timing and a nominal maximum raw data rate of about 16.7 MB/s.

Why convert IDE (UDMA mode 0) to megabyte per second?

To express legacy PATA/IDE interface speeds in a more common unit for easier comparison, reporting, and analysis of storage performance.

Are the converted speeds exact actual performance values?

No, the values represent nominal maximum transfer rates and may not reflect actual sustained throughput.

How to Convert from IDE (UDMA mode 0) to Megabyte/second [MB/s]

Learn how to convert data transfer rates from IDE (UDMA mode 0), used in legacy PATA/IDE devices, to the more common megabyte per second (MB/s) unit for easier comparison and performance analysis.

IDE (UDMA mode 0)

Megabyte/second [MB/s]

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 0) to Megabyte/second [MB/s] Conversion Table

IDE (UDMA mode 0)	Megabyte/second [MB/s]

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 0) to Megabyte/second [MB/s] Conversion Table
IDE (UDMA mode 0)	Megabyte/second [MB/s]

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows users to translate IDE (UDMA mode 0) data transfer rates, a legacy standard for Parallel ATA devices, into megabyte per second (MB/s) units. It helps in understanding and comparing the data throughput of older storage interfaces in terms of a widely recognized measurement.

How to Use This Tool?

Enter the value in IDE (UDMA mode 0) you wish to convert.
Select IDE (UDMA mode 0) as the source unit and megabyte per second (MB/s) as the target unit.
Click the convert button to see the equivalent transfer rate in MB/s.

Key Features

Converts IDE (UDMA mode 0) transfer modes to megabyte per second units.
Supports data transfer measurements for legacy PATA/IDE hardware.
Simplifies performance comparison between older and modern storage interfaces.
Provides clear and easy-to-understand conversion results.

Examples

1 IDE (UDMA mode 0) equals approximately 15.83 MB/s.
2 IDE (UDMA mode 0) equals approximately 31.66 MB/s.

Common Use Cases

Diagnosing and specifying throughput for legacy IDE/PATA hard drives and optical drives.
Selecting or troubleshooting DMA timing in BIOS or device drivers for compatibility.
Comparing legacy device speeds when upgrading from PATA to modern interfaces like SATA or USB.

Tips & Best Practices

Use the conversion to better understand and report legacy device performance in a standard unit.
Confirm which megabyte definition (decimal or binary) is being used when comparing results.
Consider that IDE (UDMA mode 0) speeds represent nominal maximum rates and might differ from actual sustained throughput.

Limitations

The nominal IDE (UDMA mode 0) transfer rate may not match actual sustained data throughput.
Variations in megabyte definitions (decimal vs binary) can lead to minor discrepancies.
This conversion mainly applies to legacy hardware and does not reflect performance of newer storage technologies.

Frequently Asked Questions

What does IDE (UDMA mode 0) represent?: IDE (UDMA mode 0) is a transfer mode for Parallel ATA devices defining interface timing and a nominal maximum raw data rate of about 16.7 MB/s.
Why convert IDE (UDMA mode 0) to megabyte per second?: To express legacy PATA/IDE interface speeds in a more common unit for easier comparison, reporting, and analysis of storage performance.
Are the converted speeds exact actual performance values?: No, the values represent nominal maximum transfer rates and may not reflect actual sustained throughput.

Key Terminology

IDE (UDMA mode 0): An Ultra DMA transfer mode for Parallel ATA devices defining interface timing with a nominal maximum transfer rate around 16.7 MB/s.
Megabyte per second (MB/s): A unit of data transfer rate measuring one megabyte of data moved each second, commonly used to report storage device speeds.
Parallel ATA (PATA): An interface standard for connecting storage devices using parallel signaling, often referred to as IDE.

Quick Knowledge Check

What is the approximate conversion rate of 1 IDE (UDMA mode 0) to MB/s?

10 MB/s

15.83 MB/s

20 MB/s

Which type of hardware typically uses IDE (UDMA mode 0)?

Modern SSDs

Legacy PATA/IDE devices

USB flash drives

What is a limitation when converting IDE (UDMA mode 0) to MB/s?

It always overestimates data rates

May vary due to megabyte definition differences

Works only for wireless devices

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter