What does IDE (UDMA mode 0) represent?

IDE (UDMA mode 0) is an Ultra DMA transfer mode for Parallel ATA devices specifying transfer timing and a nominal maximum raw data rate of about 16.7 MB/s.

What is Virtual Tributary 2 (VT2)?

Virtual Tributary 2 is a SONET/SDH sub-rate signal format carrying a 2.048 Mbps payload, allowing lower-rate PDH circuits like E1 to be multiplexed into higher-rate SONET/SDH frames.

Why convert IDE (UDMA mode 0) to Virtual Tributary 2 units?

Users convert these units to relate legacy PATA/IDE device data rates to telecom signal units for network planning and interoperability with SONET/SDH systems.

Can this conversion be used directly for all applications?

No. Because IDE and VT2 represent different data transfer types, practical use may require additional conversions or considerations beyond the numeric rate.

How to Convert from IDE (UDMA mode 0) to Virtual Tributary 2 (signal)?

Learn how to convert data transfer rates from IDE (UDMA mode 0), a PATA storage interface, to Virtual Tributary 2 (VT2), a SONET/SDH telecom signal format with a clear conversion method and practical examples.

IDE (UDMA mode 0)

Virtual Tributary 2 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 0) to Virtual Tributary 2 (signal) Conversion Table

IDE (UDMA mode 0)	Virtual Tributary 2 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 0) to Virtual Tributary 2 (signal) Conversion Table
IDE (UDMA mode 0)	Virtual Tributary 2 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This tool converts data transfer rates between IDE (UDMA mode 0), a legacy Parallel ATA interface mode for storage devices, and Virtual Tributary 2, a telecom sub-rate signal format used in SONET/SDH networks. It enables users to relate storage interface transfer speeds to telecommunications signal units.

How to Use This Tool?

Enter the quantity in IDE (UDMA mode 0) units you want to convert
Choose Virtual Tributary 2 (signal) as the target unit
Review the converted value displayed using the standard formula
Use examples for reference to verify your conversion
Apply the result for network provisioning or legacy device analysis

Key Features

Converts between IDE (UDMA mode 0) and Virtual Tributary 2 (signal)
Supports legacy PATA device throughput comparisons with telecom signals
Enables telecom network planning involving PDH and SONET/SDH standards
Provides clear formulas and example conversions
Browser-based and easy to use

Examples

Convert 2 IDE (UDMA mode 0) to Virtual Tributary 2: 2 × 57.6388888889 = 115.2777777778 VT2 signal units
Convert 0.5 IDE (UDMA mode 0) to Virtual Tributary 2: 0.5 × 57.6388888889 = 28.81944444445 VT2 signal units

Common Use Cases

Specifying legacy PATA/IDE device throughput in telecom signal terms
Configuring SONET multiplexers to accommodate lower-rate PDH circuits
Troubleshooting data transfer rates for system migrations from PATA to modern networks
Capacity planning involving integration of storage interfaces with SONET/SDH backbones
Provisioning and interworking of E1/PDH services on telecom networks

Tips & Best Practices

Use this conversion to better understand data rates across different technology domains
Apply conversions when planning integrations between storage devices and telecom equipment
Confirm network design requirements consider differences in interface types
Account for potential overhead or inefficiencies beyond nominal transfer rates
Consult device and telecom specifications for accurate operational parameters

Limitations

Conversion is based on nominal maximum transfer rates without overhead considerations
The differing nature of storage interfaces and telecom framing may require additional analysis
Conversion does not factor in physical layer constraints or protocol inefficiencies
Practical use may necessitate contextual adaptation beyond raw numeric conversion

Frequently Asked Questions

What does IDE (UDMA mode 0) represent?: IDE (UDMA mode 0) is an Ultra DMA transfer mode for Parallel ATA devices specifying transfer timing and a nominal maximum raw data rate of about 16.7 MB/s.
What is Virtual Tributary 2 (VT2)?: Virtual Tributary 2 is a SONET/SDH sub-rate signal format carrying a 2.048 Mbps payload, allowing lower-rate PDH circuits like E1 to be multiplexed into higher-rate SONET/SDH frames.
Why convert IDE (UDMA mode 0) to Virtual Tributary 2 units?: Users convert these units to relate legacy PATA/IDE device data rates to telecom signal units for network planning and interoperability with SONET/SDH systems.
Can this conversion be used directly for all applications?: No. Because IDE and VT2 represent different data transfer types, practical use may require additional conversions or considerations beyond the numeric rate.

Key Terminology

IDE (UDMA mode 0): An Ultra DMA transfer mode 0 for Parallel ATA devices defining timing and a nominal maximum raw data rate of approximately 16.7 MB/s.
Virtual Tributary 2 (VT2): A SONET/SDH sub-rate signal format carrying a 2.048 Mbps E1 payload inside higher-rate SONET/SDH frames.
SONET/SDH: Synchronous Optical Networking/Synchronous Digital Hierarchy; telecom standards for multiplexing digital signals over optical fiber.
PATA: Parallel ATA, a legacy interface standard for connecting storage devices like hard drives.
PDH: Plesiochronous Digital Hierarchy, an older telecom transmission technology used for multiplexing digital signals.

Quick Knowledge Check

What is the nominal maximum data rate of IDE (UDMA mode 0)?

About 2 Mbps

About 16.7 MB/s

About 57 Mbps

What payload rate does Virtual Tributary 2 (VT2) carry?

2.048 Mbps

16.7 MB/s

57.6 Mbps

Which technology type does IDE (UDMA mode 0) represent?

Telecom framing signal

Parallel ATA storage interface

SONET multiplexing format

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter