What does IDE (UDMA mode 0) represent in data transfer?

IDE (UDMA mode 0) defines a transfer mode for Parallel ATA devices with a nominal maximum raw data transfer rate of about 16.7 megabytes per second.

What is STM-64 (signal) used for?

STM-64 is a synchronous digital hierarchy signal used in high-capacity fiber optic networks, offering a line rate of approximately 10 gigabits per second.

Why convert between IDE (UDMA mode 0) and STM-64?

Converting between these units helps compare legacy PATA device speeds with modern high-speed optical transport rates for network planning and integration.

How to Convert from IDE (UDMA mode 0) to STM-64 (signal)

Learn to convert data transfer rates from IDE (UDMA mode 0), a legacy PATA transfer mode, to STM-64 (signal), a high-speed SDH optical transmission rate, with examples and practical use cases.

IDE (UDMA mode 0)

STM-64 (signal)

Please check your input. It must be a valid numeric value.

IDE (UDMA mode 0) to STM-64 (signal) Conversion Table

IDE (UDMA mode 0)	STM-64 (signal)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (UDMA mode 0) to STM-64 (signal) Conversion Table
IDE (UDMA mode 0)	STM-64 (signal)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter helps translate data transfer rates from IDE (UDMA mode 0), used in older Parallel ATA devices, to STM-64 (signal), a modern high-capacity synchronous digital transport format. It supports comparisons between legacy and advanced network speeds.

How to Use This Tool?

Enter the value in IDE (UDMA mode 0) units you want to convert
Select IDE (UDMA mode 0) as the source unit and STM-64 (signal) as the target unit
Press convert to get the equivalent STM-64 (signal) value
Use the results to evaluate or compare data transfer rates between interfaces

Key Features

Converts transfer rates from IDE (UDMA mode 0) to STM-64 (signal)
Supports data transfer units commonly used in storage and optical networks
Includes example calculations for user reference
Browser-based and easy to use for IT and networking professionals
Helps in assessing legacy and modern interface performance

Examples

5 IDE (UDMA mode 0) equals approximately 0.0667 STM-64 (signal)
10 IDE (UDMA mode 0) equals approximately 0.1334 STM-64 (signal)

Common Use Cases

Diagnosing throughput of legacy PATA/IDE hard drives and optical networks
Comparing transfer speeds when migrating from PATA to fiber optic links
Planning network upgrades that involve integrating legacy and modern systems
Troubleshooting BIOS or device driver DMA settings for IDE devices

Tips & Best Practices

Understand unit differences: IDE rates are in megabytes per second, STM-64 is in gigabits per second
Use this tool to get nominal transfer rate equivalents, not real-world performance
Apply conversions carefully when planning system migrations or network integration
Refer to manufacturer specifications for more detailed throughput and overhead information

Limitations

Conversion reflects nominal maximum transfer speeds, excluding overhead or inefficiencies
IDE (UDMA mode 0) rates are megabytes per second, STM-64 rates are gigabits per second, requiring attention to units
Does not account for real-world throughput variations or protocol differences

Frequently Asked Questions

What does IDE (UDMA mode 0) represent in data transfer?: IDE (UDMA mode 0) defines a transfer mode for Parallel ATA devices with a nominal maximum raw data transfer rate of about 16.7 megabytes per second.
What is STM-64 (signal) used for?: STM-64 is a synchronous digital hierarchy signal used in high-capacity fiber optic networks, offering a line rate of approximately 10 gigabits per second.
Why convert between IDE (UDMA mode 0) and STM-64?: Converting between these units helps compare legacy PATA device speeds with modern high-speed optical transport rates for network planning and integration.

Key Terminology

IDE (UDMA mode 0): An Ultra DMA transfer mode for Parallel ATA devices defining interface timing and a nominal maximum transfer rate of about 16.7 MB/s.
STM-64 (signal): A Synchronous Transport Module level‑64 signal in SDH with a line rate of approximately 10 Gbit/s, used in high-capacity fiber optic networks.
Conversion Rate: The factor used to translate IDE (UDMA mode 0) values into STM-64 (signal) values, specifically 1 IDE (UDMA mode 0) equals 0.0133423354 STM-64 (signal).

Quick Knowledge Check

What is the nominal maximum transfer rate of IDE (UDMA mode 0)?

About 16.7 gigabytes per second

About 16.7 megabytes per second

About 10 gigabits per second

STM-64 is equivalent to which of the following?

PATA interface mode

SONET OC-192/STS-192 signal

Legacy hard drive transfer mode

Which unit measures transfer rates in megabytes per second here?

STM-64 (signal)

IDE (UDMA mode 0)

Both STM-64 and IDE

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter