What is SCSI (Fast Wide)?

SCSI (Fast Wide) is an interface mode that combines a 10 MHz Fast timing with a 16-bit wide data bus, offering up to 20 MB/s in theory for legacy disk subsystems.

What does gigabit/second (SI def.) measure?

Gigabit/second (SI definition) is a data transfer rate defining one billion bits transmitted each second, commonly used in networking and communications.

Why is the conversion theoretical?

Because real throughput depends on factors like signal quality and device negotiation, this conversion uses ideal maximum speeds reflecting byte-to-bit unit differences.

Convert SCSI (Fast Wide) to Gigabit/second (SI definition) Easily

Convert data transfer rates from SCSI (Fast Wide) to gigabit per second (SI definition) quickly and accurately using this intuitive online converter.

SCSI (Fast Wide)

Gigabit/second (SI def.)

Please check your input. It must be a valid numeric value.

SCSI (Fast Wide) to Gigabit/second (SI def.) Conversion Table

SCSI (Fast Wide)	Gigabit/second (SI def.)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (Fast Wide) to Gigabit/second (SI def.) Conversion Table
SCSI (Fast Wide)	Gigabit/second (SI def.)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to transform data transfer values from SCSI (Fast Wide), a legacy disk interface speed, into gigabit per second (SI definition), a common modern networking measurement. It helps bridge the gap between older storage technologies and current communication standards.

How to Use This Tool?

Enter the amount in SCSI (Fast Wide) units you wish to convert
Select SCSI (Fast Wide) as your input unit and gigabit/second (SI def.) as the output unit
Initiate the conversion to see the equivalent rate in gigabit/second (SI definition)

Key Features

Converts data transfer rates from SCSI (Fast Wide) to gigabit/second (SI definition)
Browser-based and easy to use with no installation required
Supports legacy to modern unit comparisons for IT and networking professionals

Examples

5 SCSI (Fast Wide) equals 0.8 gigabit/second (SI definition)
10 SCSI (Fast Wide) equals 1.6 gigabit/second (SI definition)

Common Use Cases

Converting legacy SCSI data transfer speeds to modern networking standards
Benchmarking and comparing storage subsystem throughput in IT infrastructure
Evaluating data center and networking performance across different technology generations

Tips & Best Practices

Remember that this conversion is theoretical and does not include real-world losses
Use this tool to understand approximate throughput comparisons across legacy and current systems
Interpret byte-based and bit-based rates carefully during conversions

Limitations

Does not account for throughput reductions from factors like cable quality or device negotiation
SCSI (Fast Wide) rates are byte-based while gigabit/second is bit-based; results need careful interpretation
Conversion reflects theoretical maximums rather than actual achievable speeds

Frequently Asked Questions

What is SCSI (Fast Wide)?: SCSI (Fast Wide) is an interface mode that combines a 10 MHz Fast timing with a 16-bit wide data bus, offering up to 20 MB/s in theory for legacy disk subsystems.
What does gigabit/second (SI def.) measure?: Gigabit/second (SI definition) is a data transfer rate defining one billion bits transmitted each second, commonly used in networking and communications.
Why is the conversion theoretical?: Because real throughput depends on factors like signal quality and device negotiation, this conversion uses ideal maximum speeds reflecting byte-to-bit unit differences.

Key Terminology

SCSI (Fast Wide): A SCSI-2 mode combining 10 MHz timing with a 16-bit data bus for up to 20 MB/s throughput in legacy storage devices.
Gigabit/second (SI definition): A data rate unit equal to 1,000,000,000 bits per second, commonly used to express network link speeds.
Data Transfer Rate: The speed at which data is transmitted or processed, often measured in bits or bytes per second.

Quick Knowledge Check

What is the maximum theoretical throughput of SCSI (Fast Wide)?

10 megabytes per second

20 megabytes per second

1 gigabit per second

How many bits per second equal one gigabit per second (SI definition)?

1,073,741,824 bits

1,000,000,000 bits

8,000,000,000 bits

What is a key difference between SCSI (Fast Wide) and gigabit/second units?

SCSI (Fast Wide) is bit-based; gigabit/second is byte-based

SCSI (Fast Wide) is byte-based; gigabit/second is bit-based

Both use the same base unit

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter