What Is This Tool?
This converter transforms data transfer values from STM-64 (signal), a high-capacity telecommunications standard, into SCSI (Fast Wide), a legacy storage interface speed, enabling clear comparison of data rates across different technologies.
How to Use This Tool?
-
Enter the value in STM-64 (signal) units you wish to convert
-
Select STM-64 (signal) as the source unit and SCSI (Fast Wide) as the target unit
-
Click the convert button to see the equivalent SCSI (Fast Wide) data transfer value
-
Use the results to compare or analyze technology performance
-
Refer to examples for guidance on typical conversion results
Key Features
-
Converts data transfer units from STM-64 (signal) to SCSI (Fast Wide)
-
Provides easy browser-based interface for quick calculations
-
Supports comparison of network and storage data rates
-
Displays conversions based on theoretical maximum throughput
-
Includes example conversions for user reference
Examples
-
1 STM-64 (signal) equals 62.208 SCSI (Fast Wide)
-
0.5 STM-64 (signal) equals 31.104 SCSI (Fast Wide)
Common Use Cases
-
Comparing high-capacity SDH network rates to legacy storage system speeds
-
Converting backbone telecommunications link rates to equivalent storage interface throughput
-
Analyzing performance differences between modern fiber links and older SCSI devices
-
Translating data transfer capabilities for RAID controllers and tape drives
-
Facilitating cross-technology data rate understanding for system architects and engineers
Tips & Best Practices
-
Use the converter for theoretical comparisons rather than exact practical speeds
-
Consider device and cable implementations that affect real throughput
-
Verify unit selections before conversion to ensure accurate results
-
Refer to example conversions to validate your input values
-
Combine conversion results with system context for better analysis
Limitations
-
Conversion compares theoretical maximum data rates of different technologies
-
Actual throughput depends on device negotiation and signal implementations
-
Factors like cable length and system architecture affect effective speeds
-
The tool does not provide real-world performance measurements
-
Only supports units explicitly defined: STM-64 (signal) and SCSI (Fast Wide)
Frequently Asked Questions
-
What does STM-64 (signal) represent?
-
STM-64 (signal) is a telecommunications standard with a line rate near 10 Gbit/s used in carrier backbone networks for high-capacity data transmission.
-
What is SCSI (Fast Wide)?
-
SCSI (Fast Wide) is a legacy storage interface mode that combines Fast timing and a 16-bit wide data bus, offering theoretical throughput around 20 MB/s.
-
Is the conversion exact for practical uses?
-
No, the conversion reflects theoretical maximums; practical throughput may vary due to implementation details and system factors.
Key Terminology
-
STM-64 (signal)
-
A Synchronous Transport Module level 64 signal in SDH with a line rate approximately 10 Gbit/s, used for high-capacity network transport.
-
SCSI (Fast Wide)
-
A SCSI-2 interface mode combining Fast timing at 10 MHz with a 16-bit wide bus, yielding about 20 MB/s theoretical data transfer.