What does SCSI (Fast Wide) measure?

SCSI (Fast Wide) measures data transfer speed using a 16-bit wide bus at 10 MHz, providing throughput typically around 20 megabytes per second.

What is modem (9600) used for?

Modem (9600) refers to a data rate of 9,600 bits per second, commonly used to describe classic dial-up modems and serial communication speeds.

Why is the conversion factor so large?

Because SCSI (Fast Wide) operates in megabytes per second and modem (9600) in bits per second at a much lower rate, the conversion factor reflects the vast speed difference.

How to Convert from SCSI (Fast Wide) to Modem (9600)?

Learn how to convert data transfer rates from SCSI (Fast Wide), a high-speed legacy storage interface, to modem (9600), a classic low-speed data communication rate.

SCSI (Fast Wide)

Modem (9600)

Please check your input. It must be a valid numeric value.

SCSI (Fast Wide) to Modem (9600) Conversion Table

SCSI (Fast Wide)	Modem (9600)

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

SCSI (Fast Wide) to Modem (9600) Conversion Table
SCSI (Fast Wide)	Modem (9600)

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows you to translate data transfer rates from SCSI (Fast Wide), a fast 16-bit storage interface, into modem (9600), a slower dial-up modem speed used in serial and telephony communications. It helps compare and understand differences between these drastically different data rates.

How to Use This Tool?

Enter the value in SCSI (Fast Wide) units you want to convert.
Select the from-unit as SCSI (Fast Wide) and to-unit as modem (9600).
Click the convert button to see the equivalent modem (9600) data transfer rate.
Review the result to understand the speed difference between these two units.

Key Features

Converts data transfer units from SCSI (Fast Wide) to modem (9600).
Reflects the large speed gap between modern high-throughput interfaces and legacy modems.
Useful for users working with legacy computing or embedded systems.
Browser-based and easy to use without software installation.

Examples

1 SCSI (Fast Wide) equals 16,666.67 modem (9600) units.
0.5 SCSI (Fast Wide) converts to 8,333.33 modem (9600) units.

Common Use Cases

Translating throughput of legacy high-speed disk or RAID controllers to modem speeds.
Understanding performance gaps when comparing modern storage buses with classic dial-up modems.
Configuring or documenting data rates in embedded or industrial systems connecting high-speed interfaces to low-speed channels.

Tips & Best Practices

Always consider that SCSI rates are in bytes per second while modem rates are in bits per second.
Keep in mind conversion assumes theoretical maximum rates and does not include overhead or signal issues.
Use this conversion for conceptual comparisons rather than direct interoperability assumptions.
Verify unit selections carefully to ensure accurate conversions.

Limitations

Conversion is based on ideal maximum throughput, ignoring protocol and environmental factors.
The very large conversion factor illustrates the significant speed difference, limiting practical direct data exchange.
Units measure different quantities—SCSI (Fast Wide) in bytes per second, modem (9600) in bits per second—requiring attention to unit definitions.

Frequently Asked Questions

What does SCSI (Fast Wide) measure?: SCSI (Fast Wide) measures data transfer speed using a 16-bit wide bus at 10 MHz, providing throughput typically around 20 megabytes per second.
What is modem (9600) used for?: Modem (9600) refers to a data rate of 9,600 bits per second, commonly used to describe classic dial-up modems and serial communication speeds.
Why is the conversion factor so large?: Because SCSI (Fast Wide) operates in megabytes per second and modem (9600) in bits per second at a much lower rate, the conversion factor reflects the vast speed difference.

Key Terminology

SCSI (Fast Wide): A SCSI-2 interface mode combining 10 MHz timing and a 16-bit data bus, achieving up to 20 MB/s throughput for legacy storage connections.
modem (9600): A data transfer speed of 9,600 bits per second commonly associated with classic dial-up modems and serial communication.
Data Transfer Rate: The speed at which data is transmitted from one device or system to another, typically measured in bits or bytes per second.

Quick Knowledge Check

What is the typical throughput of SCSI (Fast Wide)?

9,600 bits per second

20 megabytes per second

1,000 kilobits per second

What does modem (9600) represent?

A high-speed storage interface

A data rate of 9,600 bits per second

A type of RAID controller

Why must you pay attention when converting between these units?

Because one measures bytes per second and the other bits per second

Because both units measure the same data rate

Because modem (9600) is faster than SCSI (Fast Wide)

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter