What Is This Tool?
This converter translates data transfer rates expressed in terabytes per second (TB/s), a modern high-throughput unit, into SCSI (Fast Wide) units, a legacy interface bandwidth measure. It helps users relate fast data transfer rates from current technologies to those supported by older SCSI-2 interfaces.
How to Use This Tool?
-
Enter the value in terabyte/second (TB/s) that you want to convert.
-
Select the target unit as SCSI (Fast Wide) from the available options.
-
Click the convert button to obtain the equivalent data transfer rate in SCSI (Fast Wide).
-
Use the result to compare or integrate data transfer rates between modern and legacy hardware.
Key Features
-
Converts data transfer rates from terabyte/second (TB/s) to SCSI (Fast Wide) units.
-
Helps compare high-speed modern data transfer rates with legacy SCSI-2 interface bandwidths.
-
Supports understanding throughput differences between cutting-edge and older storage technologies.
-
Provides example conversions with clearly stated formulas and rates.
-
Browser-based and easy to use with straightforward input and selection options.
Examples
-
0.5 TB/s converts to approximately 27487.79 SCSI (Fast Wide).
-
2 TB/s converts to approximately 109951.16 SCSI (Fast Wide).
Common Use Cases
-
Comparing the throughput of high-performance NVMe SSD arrays to legacy SCSI-2 disk subsystems.
-
Integrating modern storage systems with archival tape drives or external SCSI peripherals in data centers.
-
Bridging bandwidth understanding between HPC interconnects and older storage or backup devices.
Tips & Best Practices
-
Use this conversion primarily for reference and legacy compatibility purposes rather than expecting real-time equivalence.
-
Consider that actual SCSI (Fast Wide) performance depends on cable length, device negotiation, and signal type.
-
Verify data transfer requirements carefully before integrating modern high-bandwidth devices with legacy systems.
Limitations
-
SCSI (Fast Wide) has a theoretical maximum throughput near 20 MB/s which is far lower than terabyte/second speeds.
-
Practical transfer rates for SCSI (Fast Wide) vary with implementation factors such as signaling and cable conditions.
-
Conversion serves mainly for understanding compatibility and legacy system integration, not direct speed equivalence.
Frequently Asked Questions
-
What is terabyte per second (TB/s)?
-
Terabyte per second (TB/s) is a unit measuring data transfer rates equal to one trillion bytes transferred every second, commonly used for very high-bandwidth storage and network links.
-
What does SCSI (Fast Wide) represent?
-
SCSI (Fast Wide) is a legacy SCSI-2 interface mode featuring a 16-bit data bus operating at 10 MHz, with a maximum theoretical throughput of about 20 MB/s, used for connecting storage devices and peripherals.
-
Why convert from terabyte/second to SCSI (Fast Wide)?
-
Converting between these units helps users understand and compare modern high data rates with older SCSI-2 hardware bandwidths, useful for integrating new and legacy storage systems.
Key Terminology
-
Terabyte per second (TB/s)
-
A data transfer rate unit equivalent to transferring one trillion bytes every second, used for measuring very high bandwidth connections.
-
SCSI (Fast Wide)
-
A SCSI-2 interface mode with a 16-bit data bus at 10 MHz frequency, providing a maximum throughput of roughly 20 megabytes per second for connecting legacy peripherals.