What is IDE (PIO mode 3)?

IDE (PIO mode 3) is a programmed I/O transfer mode for Parallel ATA/IDE storage devices, defined by ATA standards, which relies on the CPU and has a theoretical maximum throughput of about 11.1 megabytes per second.

What does terabyte per second (TB/s) measure?

Terabyte per second represents the transfer of one terabyte of data each second, used to describe extremely high-bandwidth data transfer rates in modern storage and network systems.

Why convert IDE (PIO mode 3) to terabytes per second?

Converting from IDE (PIO mode 3) to terabyte per second helps relate legacy device speeds to modern high-bandwidth units for performance comparison, system integration, or large-scale data throughput analysis.

How to Convert from IDE (PIO mode 3) to Terabyte/second [TB/s]

Convert data transfer rates from IDE (PIO mode 3) to terabyte per second (TB/s) with this online converter. Understand the definitions, uses, and conversion formula to relate legacy hardware speeds to modern high-bandwidth units.

IDE (PIO mode 3)

Terabyte/second [TB/s]

Please check your input. It must be a valid numeric value.

IDE (PIO mode 3) to Terabyte/second [TB/s] Conversion Table

IDE (PIO mode 3)	Terabyte/second [TB/s]

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (PIO mode 3) to Terabyte/second [TB/s] Conversion Table
IDE (PIO mode 3)	Terabyte/second [TB/s]

Explore More Data Transfer Units Converter

What Is This Tool?

This converter allows users to translate data transfer speeds from IDE (PIO mode 3), a legacy CPU-driven transfer mode for Parallel ATA/IDE devices, into terabyte per second (TB/s), a modern unit representing extremely high data throughput. It helps compare and analyze transfer rates between old storage technologies and current high-performance systems.

How to Use This Tool?

Enter the value measured in IDE (PIO mode 3) transfer rate.
Select IDE (PIO mode 3) as the source unit and terabyte/second [TB/s] as the target unit.
Initiate conversion to see the equivalent data rate in terabytes per second.
Use the output to analyze or compare data transfer speeds across different technologies.

Key Features

Converts IDE (PIO mode 3) transfer speed to terabyte per second [TB/s].
Uses a precise conversion factor based on ATA standard definitions.
Supports comparisons between legacy and modern data transfer units.
Browser-based and easy to use for quick calculations.

Examples

1 IDE (PIO mode 3) equals 0.0000100954 TB/s.
10 IDE (PIO mode 3) equals 0.000100954 TB/s.

Common Use Cases

Assessing performance of legacy hard drives and optical drives operating in BIOS compatibility mode.
Benchmarking storage systems that combine old IDE devices with modern networks.
Analyzing data transfer rates in embedded or industrial systems lacking DMA support.
Comparing legacy storage modes with contemporary high-bandwidth units for scientific or retrocomputing purposes.

Tips & Best Practices

Ensure input values represent theoretical maximums for accurate comparisons.
Use conversions to gain perspective on vast scale differences between old and new data rates.
Consider context-specific overheads when applying the conversion in real-world scenarios.
Utilize this converter for educational or analytical purposes rather than precise throughput measurement.

Limitations

IDE (PIO mode 3) rates are ideal and CPU-driven, which may lead to actual transfer speeds being lower.
Terabyte per second units indicate extremely high-speed transfers, making direct equivalence to IDE rates limited by scale.
The conversion does not account for protocol overhead or real-world inefficiencies affecting throughput.
Intended for theoretical and comparative use, not precise measurement in practical conditions.

Frequently Asked Questions

What is IDE (PIO mode 3)?: IDE (PIO mode 3) is a programmed I/O transfer mode for Parallel ATA/IDE storage devices, defined by ATA standards, which relies on the CPU and has a theoretical maximum throughput of about 11.1 megabytes per second.
What does terabyte per second (TB/s) measure?: Terabyte per second represents the transfer of one terabyte of data each second, used to describe extremely high-bandwidth data transfer rates in modern storage and network systems.
Why convert IDE (PIO mode 3) to terabytes per second?: Converting from IDE (PIO mode 3) to terabyte per second helps relate legacy device speeds to modern high-bandwidth units for performance comparison, system integration, or large-scale data throughput analysis.

Key Terminology

IDE (PIO mode 3): A legacy programmed I/O transfer mode for Parallel ATA/IDE devices, CPU-driven, with a theoretical throughput around 11.1 MB/s.
Terabyte per second (TB/s): A unit measuring data transfer rate of one trillion bytes per second, used for very high-bandwidth data transfers.
Conversion Rate: A factor used to translate data transfer quantities from one unit to another; here, 1 IDE (PIO mode 3) equals 0.0000100954 TB/s.

Quick Knowledge Check

What type of transfer mode is IDE (PIO mode 3)?

Direct Memory Access (DMA) mode

CPU-driven programmed I/O mode

Network packet transfer mode

Which unit represents extremely high data transfer rates?

Megabytes per second (MB/s)

Terabyte per second (TB/s)

Kilobits per second (kbps)

What is necessary for converting IDE (PIO mode 3) speeds to TB/s?

Using the formula 1 TB/s = 11.1 MB/s

Applying the conversion rate 1 IDE (PIO mode 3) = 0.0000100954 TB/s

Knowing the device’s rotational speed

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter