What does IDE (PIO mode 3) represent in this conversion?

IDE (PIO mode 3) is a programmed I/O transfer mode used by older Parallel ATA/IDE storage devices that relies on CPU intervention and has a theoretical maximum throughput around 11.1 MB/s.

What is OC192 used for?

OC192 is a SONET optical line rate standardized at about 9.95328 Gbit/s, used primarily for high-capacity fiber-optic links in telecommunications and large network backbones.

Why compare IDE (PIO mode 3) to OC192?

This comparison helps understand the performance differences between legacy CPU-driven storage interfaces and modern high-speed optical network transport technologies.

How to Convert from IDE (PIO mode 3) to OC192

Convert data transfer rates from IDE (PIO mode 3), a legacy CPU-driven storage mode, to OC192, a high-capacity SONET optical line rate used in fiber-optic networks.

IDE (PIO mode 3)

OC192

Please check your input. It must be a valid numeric value.

IDE (PIO mode 3) to OC192 Conversion Table

IDE (PIO mode 3)	OC192

Custom Unit Conversion Table Generator – Instant Printable Conversion Tables

Start Value

Enter the starting number (positive decimal or integer ≥ 0). Example: 0.1, 1, 5.

End Value

Enter the ending number (positive decimal or integer > Start Value). Example: 10, 50, 100.

Interval

Enter the step size (positive decimal > 0 and < End Value – Start Value). Example: 1.0, 2.5.

IDE (PIO mode 3) to OC192 Conversion Table
IDE (PIO mode 3)	OC192

Explore More Data Transfer Units Converter

What Is This Tool?

This converter transforms data transfer values from IDE (PIO mode 3), a programmed I/O transfer method for older storage devices, into OC192, a standardized optical line rate used in telecommunications. It helps relate legacy storage throughput to modern network speeds.

How to Use This Tool?

Enter the data transfer value in IDE (PIO mode 3) units
Select IDE (PIO mode 3) as the source unit
Choose OC192 as the target unit
Convert to see the equivalent OC192 value

Key Features

Converts data transfer values from IDE (PIO mode 3) to OC192
Supports analysis between legacy storage performance and modern optical network capacities
Provides example conversions for quick reference
Browser-based and user-friendly interface

Examples

5 IDE (PIO mode 3) converts to approximately 0.0446 OC192
10 IDE (PIO mode 3) converts to approximately 0.0892 OC192

Common Use Cases

Comparing legacy IDE storage throughput with modern optical network speeds
Supporting embedded system designs that interface with older IDE devices
Evaluating performance differences between historical CPU-driven transfer modes and current fiber-optic standards
Assisting telecommunications professionals with network capacity assessments

Tips & Best Practices

Use this conversion for high-level comparisons rather than precise performance metrics
Consider the theoretical and practical limits of IDE (PIO mode 3) throughput in analysis
Apply the tool when retrocomputing or testing legacy system performance
Understand that OC192 rates represent network line capacity, not actual user data transfer

Limitations

IDE (PIO mode 3) throughput is a theoretical maximum and depends on CPU performance
OC192 reflects standardized network line capacity, not direct user data throughput
Conversions compare fundamentally different technologies and contexts, limiting practical equivalence

Frequently Asked Questions

What does IDE (PIO mode 3) represent in this conversion?: IDE (PIO mode 3) is a programmed I/O transfer mode used by older Parallel ATA/IDE storage devices that relies on CPU intervention and has a theoretical maximum throughput around 11.1 MB/s.
What is OC192 used for?: OC192 is a SONET optical line rate standardized at about 9.95328 Gbit/s, used primarily for high-capacity fiber-optic links in telecommunications and large network backbones.
Why compare IDE (PIO mode 3) to OC192?: This comparison helps understand the performance differences between legacy CPU-driven storage interfaces and modern high-speed optical network transport technologies.

Key Terminology

IDE (PIO mode 3): A programmed I/O data transfer mode for older Parallel ATA/IDE drives, relying on CPU control and with a theoretical maximum throughput near 11.1 MB/s.
OC192: An optical carrier level standardized at 9.95328 Gbit/s, used for high-speed SONET fiber-optic communication links.
Data transfer rate: The speed at which data is transmitted between devices or over a network.

Quick Knowledge Check

What is the theoretical maximum throughput of IDE (PIO mode 3)?

Approximately 11.1 MB/s

Approximately 9.95328 Gbit/s

Approximately 100 MB/s

OC192 is standardized for use in which type of networks?

Fiber-optic telecommunications networks

Wireless personal area networks

Legacy embedded IDE devices

What does the converter help compare?

Legacy storage transfer speeds with high-capacity optical network rates

CPU speeds across different processors

File system formats

Share Us

Similar Calculators

Online Density Units Converter Online Electric Resistance Units Converter Online Velocity Angular Units Converter Online Magnetic Flux Units Converter Online Luminance Units Converter